« previous next »
Pages: 1 2 [3]   Go Down

Author Topic: rotor drill patterns  (Read 23025 times)

0 Members and 1 Guest are viewing this topic.

Offline goon 1492

  • Sucka Repellant
  • Master
  • *****
  • Posts: 2,088
  • RIGHT ON TO THE REAL AND DEATH TO THE FAKERS
Re: rotor drill patterns
« Reply #50 on: April 28, 2012, 07:18:24 PM »
Quote from: d9canada on October 29, 2011, 09:41:57 AM
My info says the 550K rotor is 236mm, but please verify.  Also I have the 350F as being 260mm which seems odd but ??  It's sort of weird because the 350 and 500 used the same calipers. 

Can anyone confirm that 550K also used that same caliper?
Did you ever figure this out? My first time being on here in a few yrs. I will check into it and post the dia of all the sizes as soon as I can.
Logged
We are not humans going thru a spiritual experience...
We are spirits going thru a human experience....

Offline d9canada

  • Enthusiast
  • **
  • Posts: 229
Re: rotor drill patterns
« Reply #51 on: April 28, 2012, 07:30:15 PM »
Goon,
Nope, I haven't found any new information or any other replies here.  It is somewhat academic because I decided to put 550 forks on my 350F.  They are stiffer and I can upgrade to dual discs with relative ease.  But it would still be nice to know.
Cheers
Brian
Logged
Brian

CB350F to CB900C
GL500
GL1000
CBX
02 Sportster 883
64 Suzuki M15D Sovereign 50cc

Offline brandEn

  • Old Timer
  • ******
  • Posts: 3,205
Re: rotor drill patterns
« Reply #52 on: April 28, 2012, 07:34:40 PM »
goon just wanted to say thanks for the patterns! I have used them a few times.
Logged

Offline VTEC

  • Full Member
  • *
  • Posts: 48
Re: rotor drill patterns
« Reply #53 on: April 29, 2012, 12:54:36 AM »
Does anyone have pattern for gl1000 rotors?
Logged

Offline brandEn

  • Old Timer
  • ******
  • Posts: 3,205
Re: rotor drill patterns
« Reply #54 on: April 29, 2012, 09:21:33 AM »
Gl and cb use the same rotors. I used these patterns ;)
Logged

Offline crackerbat

  • Full Member
  • *
  • Posts: 83
Re: rotor drill patterns
« Reply #55 on: April 29, 2012, 09:33:14 AM »
Quote from: goon 1492 on January 17, 2009, 10:36:41 AM
I have done several fo these now for 750's, 500/550's, now low and behold 400's too. I wanted to share them with all the fellow members here and your on you own on these I claim no responsability for you actions, I have a hard enough time with myself.... ;D

Thankyou a TON!!!!
Logged

Offline goon 1492

  • Sucka Repellant
  • Master
  • *****
  • Posts: 2,088
  • RIGHT ON TO THE REAL AND DEATH TO THE FAKERS
Re: rotor drill patterns
« Reply #56 on: May 02, 2012, 07:35:50 PM »
You guys are awesome! 8) There's a junk yard 30 mins from ma house and I'm gonna go buy up their GL and CB rotors and start drillin sets to sell. Or just have rotors if ya wanna do it your self. I dunno what other sizes they have but I'll ask em. Their a real great buncha country folk. I'll get back with those sizes probably on saturday, I've been too busy at work to get a chance to check on em. Peace.
Logged
We are not humans going thru a spiritual experience...
We are spirits going thru a human experience....

Offline zenocchio

  • Enthusiast
  • **
  • Posts: 123
Re: rotor drill patterns
« Reply #57 on: February 09, 2014, 06:38:15 PM »
Quote from: Duanob on October 28, 2011, 11:46:29 AM
Hi Scott,
I just printed it off here at work on 11x17 paper, no scaling. I got 275mm diameter on the drawing. Does anybody have the diameter of the disc itself?
My cb500 rotor is 275mm diameter.
should be the same for yours.

Thanks for the templates!
Logged
Pages: 1 2 [3]   Go Up
« previous next »