Topic: 350F-400F exhaust swap?

[Jay B]

Will the exhaust from a 400F fit a 350F? I found an aftermarket 4 into 1 from a 400 but I don't know if it will work. TIA

[Jay B]

Well, if you measure from center to center of the header pipes right at the front of the exhaust clamps, 1 and 2, and 3 and 4 are about 3 1/8" apart, and 2 and 3 are about 4" apart. Not very scientific, but it's a start.

[Trevor from Warragul]

The standard 400/4 system will fit, you won't be able to use the rear brake, though..

[Jay B]

Thanks! This system is a Kerker type system, the collector is under the motor instead of on the side like a stock 400F system.