Author Topic: sohc chopper questions  (Read 1269 times)

0 Members and 1 Guest are viewing this topic.

mikeb

  • Guest
sohc chopper questions
« on: December 04, 2005, 03:47:15 PM »
I just picked up cb 750 chopper its a amen frame with a 74 750 engine Price was great come and get it needs carbs rebuilt and a bunch of other work it has pod uni filters anyone know stock jet sizes so I can tell if it has been rejetted also a mt 90 16 tire on the rear anyone have a conversion size thanks for the help mikeb

Offline Bob Wessner

  • "Carbs Suck!"
  • Really Old Timer ...
  • *******
  • Posts: 10,079
Re: sohc chopper questions
« Reply #1 on: December 04, 2005, 04:37:26 PM »
Check out this post (or the same info. in the FAQ's) for carb data..

http://www.sohc4.us/forums/index.php?topic=5821.0
We'll all be someone else's PO some day.

Offline nteek754

  • Hot Shot
  • ***
  • Posts: 364
  • 1973 K3/750/836/70 1970 750 chopper 1973 cafe
Re: sohc chopper questions
« Reply #2 on: December 04, 2005, 04:59:09 PM »
Mike   hey there  the stock jets for the 74 was 105 now as for the needle setting I cant say as that as you 0probably know plays in big time the rear tie  I think what your asking is  what I run is 130 16  good luck hope this helps  Craig   seven fifty four ever
seven fifty four ever its not the destination its the journey Ive been collecting these old dinasours for 33 years . they are quite an ICON

Offline Lumbee

  • Expert
  • ****
  • Posts: 1,498
    • My pics...
Re: sohc chopper questions
« Reply #3 on: December 05, 2005, 08:04:18 AM »
...sup Mike...congrats on the find!  Stock carbs are usually 105's or 110's an most people move up to 120 or 125's with straight pipes and pods.  Mosey on over to http://p196.ezboard.com/bhondachopper .  Someone can answer u'r tire converson question there...
----------
"I'm not a welder, but I play one on HondaChopper.com"