« previous next »
Pages: [1]   Go Down

Author Topic: Carb Little Screws CB750  (Read 1121 times)

0 Members and 1 Guest are viewing this topic.

kmenzel

  • Guest
Carb Little Screws CB750
« on: January 02, 2006, 02:22:15 PM »
Ive checked all the FAQ and can't find the exact size of the 2 little screws that hold the needle into the carb slider.  Its 1974 CB750.  If anyone has the size i would appreciate, since mine are somewhat stripped. 
Logged

Offline Steve F

  • I have "some-timer's disease" because I'm an
  • Old Timer
  • ******
  • Posts: 2,928
  • "To Ride Is The Reason, The Destination The Excuse
Re: Carb Little Screws CB750
« Reply #1 on: January 02, 2006, 02:29:16 PM »
This probably won't help you much, but when I was tinkering with the carbs, I replaced them with socket head (allen head) screws.  They were obtainable from the local ACE hardware store.  I think they're 2mm but don't quote me on that.  You gotta take one of the sliders with you to the store to be sure of the size.
Logged

Offline Magpie

  • Old Timer
  • ******
  • Posts: 3,371
Re: Carb Little Screws CB750
« Reply #2 on: January 02, 2006, 05:09:24 PM »
If I'm reading my parts book correctly they are 3 x 10 pan head screws, part no. 93500-03010-0A. The 2 3mm spring washers are 94111-03000.
 Hope that helps.
Cheers,
Cliff.
Logged

kmenzel

  • Guest
Re: Carb Little Screws CB750
« Reply #3 on: January 02, 2006, 06:11:22 PM »
thanks much
Logged
Pages: [1]   Go Up
« previous next »