Author Topic: trying to buid a CR 750 look alike (Read 26241 times)

silvercr750 · « **Reply #75 on:** October 24, 2010, 12:56:14 PM »

Flanges in the head

By silvercr750 at 2010-10-24

silvercr750 · « **Reply #76 on:** October 24, 2010, 01:13:05 PM »

Oh yeah, I've decided to use springs to hold the exhaust on to the cilinderhead.
Already got me some parts to hook them on to.
There will be a kind of hook welded on the exhaust, pictures will follow.

By silvercr750 at 2010-10-24

Sam Green Racing · « **Reply #77 on:** October 24, 2010, 02:30:40 PM »

9 brackets Silver

must be a SOHC4.5

Sam

silvercr750 · « **Reply #78 on:** October 25, 2010, 02:02:13 PM »

Hi Sam,
Can't hide anything from you.

Today the exhaust is melted together on a few points and tryed on again.
Looked good.

Made the eyes where the spring will be hooked on to keep the exhaust in place.

Hopefully tomorrow these parts wil be welded.
Then there is an flange to be made for the exact positioning of the exhaust on the cilinderhead.

By silvercr750 at 2010-10-25

silvercr750 · « **Reply #79 on:** October 28, 2010, 02:02:40 PM »

Hi there,

And the beginning is here.
Welded and a little polishing

By silverCR750 at 2010-10-28

silvercr750 · « **Reply #80 on:** October 28, 2010, 02:04:52 PM »

And on the cilinderheads the first two look like this.

By silvercr750 at 2010-10-28

silvercr750 · « **Reply #81 on:** October 29, 2010, 02:42:18 PM »

Now a flange for centering the exhaust to the cilinderhead is to be made.
Outside 40 mm, inside 38 and 36 mm.
Then the springs can be mounted to see how it looks.

By silvercr750 at 2010-10-28

silvercr750 · « **Reply #82 on:** October 30, 2010, 03:11:32 AM »

Yes yes.
Flanges are ready and looking good, thanx A3

By silvercr750 at 2010-10-30

silvercr750 · « **Reply #83 on:** October 30, 2010, 01:26:38 PM »

And this is how it looks if all parts so far are mounted.

By silvercr750 at 2010-10-30

silvercr750 · « **Reply #84 on:** November 02, 2010, 01:33:02 PM »

HI,

Today the fairing is mounted so that I could see how it all fits.

It's looking good, just a small piece has to be removed from the fairing.

gr.

By silvercr750 at 2010-11-02

silvercr750 · « **Reply #85 on:** November 09, 2010, 08:36:46 AM »

Hi there,

and as the fairing is on looking how the rest fits in.

By silvercr750 at 2010-11-09

754 · « **Reply #86 on:** November 09, 2010, 06:29:02 PM »

That work you are doing looks very good.. I like the werkmanship..

Have you been hanging around with Mec , perhaps..??

I like what you did to hold the head end of the spring, I just cringe when I see holes drilled in the head..

silvercr750 · « **Reply #87 on:** November 10, 2010, 02:13:23 PM »

Hi 754,

Thanx for your replay.
I didn't want to drill a hole in the cilinderhead. This is more like it.

To bad I have little time these days but I hope to be able to work on it next week and show some more parts.

Keep you posted.

gr
Coos

silvercr750 · « **Reply #88 on:** November 06, 2011, 01:22:17 PM »

Hi there,

It's been a while but the build has gone on.
Bought me a screen for the fairing.

By silvercr750 at 2011-09-11

silvercr750 · « **Reply #89 on:** November 06, 2011, 01:28:40 PM »

Because I want to ridethe bike on the road it has to have some lighting.

At first the headlight.
A-simetrical in a racefearing

By silvercr750 at 2011-09-11

silvercr750 · « **Reply #90 on:** November 06, 2011, 01:30:09 PM »

Then fitting a lampholder in

By silvercr750 at 2011-09-11

silvercr750 · « **Reply #91 on:** November 06, 2011, 01:32:06 PM »

and let it look a bit clean.

By silvercr750 at 2011-10-12

FrankenFrankenstuff · « **Reply #92 on:** November 06, 2011, 05:30:23 PM »

I am digging the pipe work.

Jim F · « **Reply #93 on:** November 07, 2011, 08:53:03 AM »

I really like the off set head light
I was thinking of doing the same thing to my faring
keep sending pics

Jim

silvercr750 · « **Reply #94 on:** November 07, 2011, 09:25:27 AM »

Thank you Franken, I'll come to the exhaust later.

Hey Jim, With the headlight in "set off" the fairing can be mounted with the centre bracket.

And then the rear will need a light.
Starting with the seat

By silvercr750 at 2010-02-06

silvercr750 · « **Reply #95 on:** November 07, 2011, 09:28:13 AM »

At first led's where planned for the rear.
light-weight and little power needed.

But very futuristic.

By silvercr750 at 2011-11-07

silvercr750 · « **Reply #96 on:** November 07, 2011, 09:31:43 AM »

But then I decided to make it look more old-school.
A normal lightbulb and red (small) item.

By silvercr750 at 2011-11-07

FrankenFrankenstuff · « **Reply #97 on:** November 07, 2011, 09:35:58 AM »

Making holes and filling them in. Somtimes it is necessary to find your vision by.....finding what you dont like. I have been doing this to my bike for longer than I would like to admit.

This thing is a race bike, so just call them "speed holes".

silvercr750 · « **Reply #98 on:** November 07, 2011, 09:38:46 AM »

51 mm in diameter is the light's refelector.
This needed a 'Speed'-hole in the rear.

By silvercr750 at 2011-11-07

silvercr750 · « **Reply #99 on:** November 07, 2011, 09:42:05 AM »

And in the end it looks like this.

Still think I will change it a little in the near future.

By silvercr750 at 2011-11-07

News:

Author Topic: trying to buid a CR 750 look alike (Read 26241 times)