Author Topic: Honda CB550  (Read 1770 times)

0 Members and 1 Guest are viewing this topic.

Offline RondaDaHonda

  • Full Member
  • *
  • Posts: 5
Honda CB550
« on: January 31, 2011, 09:15:35 PM »
So i love the way the marving exhaust sounds but they only make it for the 500 and not the 550 does anyone know if the heads are that much different between these bikes cause them being only 50ccs different i wouldnt think there would be that big of a change.

Thanks in advance!
Red

Offline FunJimmy

  • Who you calling
  • Old Timer
  • ******
  • Posts: 3,802
  • Vancouver
Re: Honda CB550
« Reply #1 on: January 31, 2011, 10:12:20 PM »
Red

Same! You can exchange exhausts between the 500 & 550.
You never see a motorcycle parked outside of a psychiatrist's office!

CB550 Cafe Interceptor a Gentlemans Roadster
http://forums.sohc4.net/index.php?topic=27159.0

Offline RondaDaHonda

  • Full Member
  • *
  • Posts: 5
Re: Honda CB550
« Reply #2 on: February 01, 2011, 10:54:47 AM »
Will it rob it of performance if I put the 500 exhaust on it??

Red

Offline P_Camps

  • Enthusiast
  • **
  • Posts: 124
Re: Honda CB550
« Reply #3 on: February 01, 2011, 12:33:33 PM »
no your good... the only engine diff is that the 500's cylinders are of a smaller diameter.
1978 CB550

Offline eideteker

  • Enthusiast
  • **
  • Posts: 180
Re: Honda CB550
« Reply #4 on: February 01, 2011, 06:42:01 PM »
Just another confirmation, but the other direction - I have a 550 header on my 500 with no big issues.
"Spit on the tip of your finger, lube the inside of the hole, and then wiggle it around and twist a bit back and forth as you apply pressure." - mystic_1

1973 CB500K - not bad for a first bike
2009 SFV650 - torquey, reliable 90° V-twin

Offline RondaDaHonda

  • Full Member
  • *
  • Posts: 5
Re: Honda CB550
« Reply #5 on: February 02, 2011, 02:28:36 PM »
Ok cool thanks for the helpful info!!!

Red

Offline RondaDaHonda

  • Full Member
  • *
  • Posts: 5
Re: Honda CB550
« Reply #6 on: February 02, 2011, 02:29:20 PM »
I'll post up the 550 soon just to show yall what im working with!

Offline SHELLFISH

  • Enthusiast
  • **
  • Posts: 156
Re: Honda CB550
« Reply #7 on: February 02, 2011, 05:36:46 PM »
I'd like to see a picture of the Marving exhaust.
I want to die like my grandfather did...in his sleep and not screaming like the passengers in his car!