Author Topic: Smaller turn signals (Read 804 times)

Ketch · « **on:** May 30, 2011, 10:44:07 PM »

Any suggestions for replacing stock turn signals on a 76 550f PO I think jb welded a set of stock ones on it and they look horrid. Any help / thoughts on the subject
thanks

johnny · « **Reply #1 on:** May 31, 2011, 06:46:37 AM »

I went with these smaller generic type I think I purchased on eBay:

Nortstudio · « **Reply #2 on:** May 31, 2011, 07:18:58 AM »

I have those same ones - got them from Dime city cycles for pretty cheap. Wired up pretty smooth, and haven't had a problem yet with the lower draw.

johnny · « **Reply #3 on:** May 31, 2011, 10:20:22 AM »

I should also mention the front signals are wired as running lights. No power issues at all.

Nortstudio · « **Reply #4 on:** May 31, 2011, 10:38:28 AM »

Quote from: johnny on May 31, 2011, 10:20:22 AM

I should also mention the front signals are wired as running lights. No power issues at all.

+1 don't forget the dual filament up front.

SOHC/4 Owners Club Forums

News:

Author Topic: Smaller turn signals (Read 804 times)

Ketch

Smaller turn signals

johnny

Re: Smaller turn signals

Nortstudio

Re: Smaller turn signals

johnny

Re: Smaller turn signals

Nortstudio

Re: Smaller turn signals