« previous next »
Pages: [1]   Go Down

Author Topic: Rim cleaning?  (Read 1805 times)

0 Members and 1 Guest are viewing this topic.

Offline Ryan66

  • Hot Shot
  • ***
  • Posts: 301
Rim cleaning?
« on: June 11, 2011, 11:50:32 AM »
What is the best way to remove surface from rims and then polishing them? on a 76 550
Logged
1976 CB550k (cafe project)

Offline myoldcb200

  • Full Member
  • *
  • Posts: 56
Re: Rim cleaning?
« Reply #1 on: June 11, 2011, 12:07:43 PM »
i am assuming u mean surface rust. Do a google search on it. I have been using aluminum foil and water. Do not buy the cheap foil from the 1$ store I do not think its all aluminum. Just take a bit of foil and ball it up. Dip it in water and wax on wax off with it. Do little areas at a time. Keep a paper towel or old cloth t handy to wipe away the blackness so you can c how your making out. Unless you have the resources for the air tools or w/e others are using.  Don't forget to get some oil for you elbows as it takes some time and a lot of elbow grease.
Logged
The bike I am working on is --->1974 cb750 k4

Offline Ryan66

  • Hot Shot
  • ***
  • Posts: 301
Re: Rim cleaning?
« Reply #2 on: June 11, 2011, 02:21:31 PM »
Ya i may be there awhile with foil!
Logged
1976 CB550k (cafe project)

Offline dna_level_c7

  • Full Member
  • *
  • Posts: 78
Re: Rim cleaning?
« Reply #3 on: June 11, 2011, 02:37:05 PM »
I had decent results with a wire wheel and a electric drill. I am looking into purchasing a dremel to get into all the sweet spots.
Logged
1977 CB750K Stock

Offline WarwickE36

  • Expert
  • ****
  • Posts: 761
Re: Rim cleaning?
« Reply #4 on: June 11, 2011, 03:23:55 PM »
I used a product called "Colonel Brassy" on all of my chrome and unpainted metal motor components.  It worked slick.  5 bucks from some traveling girl sales woman in a low cut shirt.
Logged
" Why does anyone get offended by what someone does to their own bike? I dont get it. "

You made me think about it after I cheered knowing someone else would like to know what these control freaks are up to.
 Every time any owner strips whatever precious Honda part the horrified purists parts go up in value. That's not the part that bothers them.
 What bothers them is they sat up late at night, their breast full of wonder and estrogen, unable to sleep, dreaming about their lovely darling and all her glory... and next thing you know someone else doesn't share their emotional deluge and their reaction is they must spread their mind museum as far as they possibly can, taking over as much of the real world as possible.

Drink fast, drive slow, but ride it like you stole it

1974 Cb550 with style
2004 SV650s

Offline Ryan66

  • Hot Shot
  • ***
  • Posts: 301
Re: Rim cleaning?
« Reply #5 on: June 11, 2011, 03:56:04 PM »
Quote from: WarwickE36 on June 11, 2011, 03:23:55 PM
I used a product called "Colonel Brassy" on all of my chrome and unpainted metal motor components.  It worked slick.  5 bucks from some traveling girl sales woman in a low cut shirt.
Send her my way!
Logged
1976 CB550k (cafe project)

Offline Johnie

  • Really Old Timer ...
  • *******
  • Posts: 8,753
Re: Rim cleaning?
« Reply #6 on: June 11, 2011, 06:14:31 PM »
WD40 and 0000 steel wool works great.
Logged
1970 CB750K0 - Candy Ruby Red
1973 CB750K3 - Candy Bacchus Olive or Sunflake Orange
1970 Chevy Chevelle SS396 - Cortez Silver
1976 GL1000 Sulphur Yellow

Oshkosh, WI  USA

Offline finkbuilt

  • Full Member
  • *
  • Posts: 77
    • finkbuilt
Re: Rim cleaning?
« Reply #7 on: June 11, 2011, 06:18:35 PM »
I used the aluminum foil method, but with chrome polish instead of water.  Worked great! It may leave tiny abrasions, but not as bad as steel wool. 
Logged
73 CB350F

Offline BobbyR

  • Really Old Timer ...
  • *******
  • Posts: 12,360
  • Proud Owner of the Babe Thread & Dirty Old Man
Re: Rim cleaning?
« Reply #8 on: June 11, 2011, 06:24:19 PM »
Mythbusters proved that Aluminum foil and Coca Cola worked very well. Coke has phosphoric acid in it that does the work.
Logged
Dedicated to Sgt. Howard Bruckner 1950 - 1969. KIA LONG KHANH.

But we were boys, and boys will be boys, and so they will. To us, everything was dangerous, but what of that? Had we not been made to live forever?

Offline Johnie

  • Really Old Timer ...
  • *******
  • Posts: 8,753
Re: Rim cleaning?
« Reply #9 on: June 12, 2011, 06:05:31 AM »
Never had any marks from 0000 steel wool and WD40. Did tons of rims. Seems to me the sharp edges of the foil would cause more problems. Use what works for you.
Logged
1970 CB750K0 - Candy Ruby Red
1973 CB750K3 - Candy Bacchus Olive or Sunflake Orange
1970 Chevy Chevelle SS396 - Cortez Silver
1976 GL1000 Sulphur Yellow

Oshkosh, WI  USA

Offline myoldcb200

  • Full Member
  • *
  • Posts: 56
Re: Rim cleaning?
« Reply #10 on: June 12, 2011, 08:00:07 AM »
I had read a few articles about using aluminum foil. The reason I chose it was because the chrome I am working on is very bad and even tho it shines rather well after I finaly finished it. It's still very very pitted.

http://www.robertscycle.com/chrome-clean.html

I had read this about how the aluminum reacts with the chrome.
Logged
The bike I am working on is --->1974 cb750 k4

Offline splitt

  • Enthusiast
  • **
  • Posts: 178
Re: Rim cleaning?
« Reply #11 on: June 12, 2011, 07:33:02 PM »
I use this for cleaning surface rust on both chrome and painted surfaces. I bought it from a dealer at the AMCA fall nationals two years ago.

http://strongarmsprays.com/

From what I understand, it was originally designed for the military. It also has a rust preventer in it. The 4 oz. bottle will go a long way. So you don't need very much.
Logged
Pages: [1]   Go Up
« previous next »