Topic: 350f carb rack

[nk140]

I am reassembling my 350f carb rack and can't figure out where the spring is suppose to attach between the 2-3 carbs.  Is there suppose to be a post/bar between the carbs?  If so I think I lost mine is the past week or two in the garage somewhere.  Any help is much appreciated.  Thanks

[RickB]

NK,

Yes there is a little metal pellet with a grove through it that the spring connects to. It slots into a hole behind the T shaped fuel junction. You can see the shape of the part on this CMSNL diagram. It's right below the spring that is labelled 100.

I doubt you can buy the part anyway as it doesn't have a part number. However someone with a bunch of carbs parted out may have it. Alternatively you can just use a small piece of metal rod cut to fit.

Rick.

[nk140]

NK,

Yes there is a little metal pellet with a grove through it that the spring connects to. It slots into a hole behind the T shaped fuel junction. You can see the shape of the part http://images.cmsnl.com/img/partslists/engine-group-1j-1k-2j-2k-cb400f-australia_bigma000080e01-4_c702.gif]on this CMSNL diagram[/url]. It's right below the spring that is labelled 100.

I doubt you can buy the part anyway as it doesn't have a part number. However someone with a bunch of carbs parted out may have it. Alternatively you can just use a small piece of metal rod cut to fit.

Rick.

Thanks for the info.  I couldn't find the piece that you speak of.  I did use a small piece of metal in its place.