« previous next »
Pages: [1]   Go Down

Author Topic: Wiring quickie  (Read 733 times)

0 Members and 1 Guest are viewing this topic.

Offline greenjeans

  • Industrial strengthed dreamer.
  • Old Timer
  • ******
  • Posts: 2,962
  • 1972 CB750K2
Wiring quickie
« on: November 04, 2016, 06:10:47 PM »
Wiring up a 1970 CB750.  Modified wiring harness.

For the small braided wire that goes from the + battery terminal to the solenoid.  It's braided. 
I have to use something about 2 inches longer.  6 or 8 gauge copper wire (instead of the braid) would be fine wouldn't it?  What's the purpose of the braided wire vs copper strand?
Logged
Yep, I'm the kid that figured out how to put things back together...eventually.

Offline calj737

  • Really Old Timer ...
  • *******
  • Posts: 21,100
  • I refuse...
Re: Wiring quickie
« Reply #1 on: November 04, 2016, 08:39:55 PM »
Density and amperage rating.

6-8 will be fine.
Logged
'74 550 Build http://forums.sohc4.net/index.php?topic=126401.0
'73 500 Build http://forums.sohc4.net/index.php?topic=132935.0

"Of all tyrannies, a tyranny sincerely exercised for the good of it's victim may be the most oppressive. It may be better to live under robber barons than under omnipotent moral busybodies. The robber baron's cruelty may sometimes sleep, his cupidity may at some point be satiated, but those who torment us for our own good will torment us without end for they do so with the approval of their own conscience." - C.S. Lewis

Offline pmanning

  • Enthusiast
  • **
  • Posts: 103
Re: Wiring quickie
« Reply #2 on: November 05, 2016, 08:01:56 AM »
The braided wire is also more flexible, therefore easier to work through the tight spaces around the battery box and components.  Stranded copper is a lot stiffer.  If you are near an electric motor repair shop they are often a good source for braided copper conductor.
Logged

Offline Bodi

  • Really Old Timer ...
  • *******
  • Posts: 5,700
Re: Wiring quickie
« Reply #3 on: November 05, 2016, 10:46:29 AM »
Welding cable is very flexible but has thick insulation, no need for any insulation on the ground wire as long as it doesn't cross near the + terminal or any open + terminals. Car stereo shops usually have "wet noodle" superflex large gauge wire. Normal "house" stranded cable in 6ga or 8ga will be incredibly stiff, and prone to work hardening and breaking from normal maintenance and normal vibration.
Logged
Pages: [1]   Go Up
« previous next »