Author Topic: Jet question / motor question  (Read 2518 times)

0 Members and 4 Guests are viewing this topic.

RDRF3

  • Guest
Jet question / motor question
« on: April 12, 2005, 11:40:53 am »
 Hey All, I'm rebuilding a 750 K0  carbs are Keihin  2 . 5  ????
 main is 115, slow is 40, needle has 27201 ??
 don't know what someone did to these before I got them, besides leave out some stuff I'm
 having to find BUT,,  do these numbers sound right together ?
 Also is there a way to tell if a motor has been beefed up without tearing it apart ?
 Thanks, Raymond in Texas

Offline MRieck

  • Really Old Timer ...
  • *******
  • Posts: 10,542
  • Big ideas....
Re: Jet question / motor question
« Reply #1 on: April 12, 2005, 06:32:35 pm »
You could look down the intake ports and see if they have been workrd on. Alot of compression- 180 to 200lbs via a compression check- would indicate high compression pistons etc.
Owner of the "Million Dollar CB"

RDRF3

  • Guest
Re: Jet question / motor question
« Reply #2 on: April 12, 2005, 07:48:22 pm »
  Hey !! Thanks I didn't think about that, I'll have to find a good tester, I have a cheapy.
  I got this bike for 0 , Nodda, nothing, zilch . . .  Just hope I can get it running .
  any way thank again for the info . I'm do'in some before and after pics I;ll try to post some
  later.      Raymond in Texas

Offline Terry in Australia

  • Really Old Timer ...
  • *******
  • Posts: 33,221
  • So, what do ya wanna talk about today?
Re: Jet question / motor question
« Reply #3 on: April 12, 2005, 08:46:14 pm »
That's not Ray Radney is it? Hey Ray, no-one gives away K0's for free, your boy didn't just happen to bring that K0 back from Saddam's private stash in Iraq now did he? Ha ha, Cheers, Terry. ;D
I was feeling sorry for myself because I couldn't afford new bike boots, until I met a man with no legs.

So I said, "Hey mate, you haven't got any bike boots you don't need, do you?"

"Crazy is a very misunderstood term, it's a fine line that some of us can lean over and still keep our balance" (thanks RB550Four)

Offline Jonesy

  • Shop Rat
  • Old Timer
  • ******
  • Posts: 2,648
  • "Damn! These HM300 Pipes Are Expensive!!!"
Re: Jet question / motor question
« Reply #4 on: April 13, 2005, 01:32:46 pm »
You have all stock components in your carbs, with the exception of the mains. The bikes used 120, 110, and 105's. Does your bike have a 4-to-1 on it? I just rebuilt my '73 K3 carbs with gen-u-wine Honda parts and those numbers (for the jet needle) sound right.
"Every time I start thinking the world is all bad, then I start seeing people out there having a good time on motorcycles; it makes me take another look." -Steve McQueen

RDRF3

  • Guest
Re: Jet question / motor question
« Reply #5 on: April 13, 2005, 08:41:13 pm »
  Hey Terry yes thats me !!! LOL  NO my son had nothing to do with this thing.
  He did buy himself a bike when he got home. probably shouldn't say cuss words like
  Kawazaki .. 600rr.  But. 
  Any, thanks all,  for the info.   Raymond in Texas

Sandcast 2356

  • Guest
Re: Jet question / motor question
« Reply #6 on: April 13, 2005, 10:45:38 pm »
where you at in Texas Ray??

Offline Terry in Australia

  • Really Old Timer ...
  • *******
  • Posts: 33,221
  • So, what do ya wanna talk about today?
Re: Jet question / motor question
« Reply #7 on: April 14, 2005, 03:19:52 am »
  Hey Terry yes thats me !!! LOL  NO my son had nothing to do with this thing.
  He did buy himself a bike when he got home. probably shouldn't say cuss words like
  Kawazaki .. 600rr.  But. 
  Any, thanks all,  for the info.   Raymond in Texas

G'Day Ray, don't worry about that boy of yours mate, he'll come around and get himself a real "Classic" like ours one day, I'm just glad he got back in one piece, and I hope he doesn't have to go back to "The land of Sand" again! Cheers, Terry. 8)
I was feeling sorry for myself because I couldn't afford new bike boots, until I met a man with no legs.

So I said, "Hey mate, you haven't got any bike boots you don't need, do you?"

"Crazy is a very misunderstood term, it's a fine line that some of us can lean over and still keep our balance" (thanks RB550Four)

RDRF3

  • Guest
Re: Jet question / motor question
« Reply #8 on: April 14, 2005, 09:49:03 am »
I'm in Pasadena, on the edge of Houston.