Author Topic: Parting Out a 77 750A (Read 7244 times)

77 CB750A · « **on:** February 20, 2012, 01:41:16 PM »

Guys,

I'm parting out a 77 750a. I have basically everything but the headlight assembly and the gas tank. I also have a complete carb rebuild kit. Let me know what you need.

Blucav85 · « **Reply #1 on:** February 22, 2012, 08:00:05 PM »

Do you have pics of the seat and willing to ship it?

WhyNot2 · « **Reply #2 on:** February 23, 2012, 04:04:02 AM »

Can you show pics?

boatsdickson · « **Reply #3 on:** February 23, 2012, 05:49:23 PM »

What condition are the carb manifold boots in?
I could use a right hand handlebar control also. Interested in both.....Boats

Bill/BentON Racing · « **Reply #4 on:** February 24, 2012, 01:31:16 PM »

Engine?,or T/Q,trans shafts and clutch packs!

Thanks,Bill

HansCB750A · « **Reply #5 on:** February 25, 2012, 11:48:55 AM »

Quote from: 77 CB750A on February 20, 2012, 01:41:16 PM

. Let me know what you need.

I'm looking for a kick start lever. Still available?

Thanks,
Hans

77 CB750A · « **Reply #6 on:** February 25, 2012, 07:29:24 PM »

Thats the one thing I don't have...sorry

HansCB750A · « **Reply #7 on:** February 25, 2012, 10:34:48 PM »

Ok. Thanks.
The quest continues........

Rooster87 · « **Reply #8 on:** February 26, 2012, 07:10:40 AM »

Rear rim any good?

77 CB750A · « **Reply #9 on:** February 29, 2012, 07:02:00 AM »

rear rim is good. I'm told it isnt the base model rim and is an upgrade. I will pull model number or pic to show rim.

chickenman_26 · « **Reply #10 on:** March 08, 2012, 06:38:22 AM »

Quote from: 77 CB750A on February 29, 2012, 07:02:00 AM

rear rim is good. I'm told it isnt the base model rim and is an upgrade. I will pull model number or pic to show rim.

To my knowledge, Honda never offered an upgrade option for the wheels. So I'd be interested to see what you have there, if you ever post a picture.

Stu

77 CB750A · « **Reply #11 on:** March 14, 2012, 03:16:54 PM »

77 CB750A · « **Reply #12 on:** March 14, 2012, 03:17:41 PM »

Front rim is 19"

77 CB750A · « **Reply #13 on:** March 14, 2012, 03:18:24 PM »

77 CB750A · « **Reply #14 on:** March 14, 2012, 03:19:04 PM »

dave the welder · « **Reply #15 on:** March 23, 2012, 05:56:45 PM »

same as on my 77

chickenman_26 · « **Reply #16 on:** March 27, 2012, 05:07:33 AM »

Right. That's no upgrade. Those are both standard rims for that bike.

Stu

JimS63 · « **Reply #17 on:** April 03, 2012, 08:10:14 AM »

You said you sold the tank. Do you still have the petcock available?
How much for the front rim/axle assembly?

rbgltd · « **Reply #18 on:** April 09, 2012, 06:24:04 AM »

ineed a 1976 start switch/right hand control for 750A

clintcd · « **Reply #19 on:** April 14, 2012, 03:03:17 AM »

Hi, I am looking for the grab bar with mounting hardware and rear indicators, are they available,

salukispeed · « **Reply #20 on:** April 14, 2012, 05:42:47 AM »

Good moring I am new here and will fill in any info later today. I am also looking for a rear fender and grab rail with turn signals like the gentleman from Ireland. I have a 77 750 A that runs and drives great but needs years of rust and neglect erased. Can you help
Thank's

Roach Carver · « **Reply #21 on:** April 14, 2012, 07:13:29 AM »

Did the rear rim sell? If not i am interested. I specifically need the rim and spokes

cormiert · « **Reply #22 on:** April 17, 2012, 07:34:47 AM »

I am not a bike person, but the guy I'm posting for is(computer illiterate). What he is wondering is if you have a rear fender. He is also lookng for mufflers - NOS or Re-Pop(means nothing to me). He has a 77 CB750A that he is looking to fix.

Roach Carver · « **Reply #23 on:** April 17, 2012, 08:57:02 AM »

dead thread.

SGTBob · « **Reply #24 on:** May 19, 2012, 04:00:48 PM »

Quote from: Blucav85 on February 22, 2012, 08:00:05 PM

Do you have pics of the seat and willing to ship it?

Do you have the front turn signal mounts? If so, how much would you take for both of them?

1974cb550k · « **Reply #25 on:** May 20, 2012, 01:12:42 PM »

I am in need of a speedo and the lh control. Thanks

77Pinto · « **Reply #26 on:** May 20, 2012, 02:53:38 PM »

If this thread comes back from the dead, I could use a rear fender and chain guard. Maybe coils too....

Bill

WHEELMAN7 · « **Reply #27 on:** June 15, 2012, 08:09:59 PM »

Do you still have the original wire loom (harness) and electrics?

salukispeed · « **Reply #28 on:** June 16, 2012, 09:29:38 AM »

Do you have the crank case ventilation canister ( mounts between the battery and air cleaner ) and hose from it to the bottom of the bike. Most of the one on mine is missing.

SGTBob · « **Reply #29 on:** July 15, 2012, 09:34:50 AM »

Quote from: SGTBob on May 19, 2012, 04:00:48 PM

Quote from: Blucav85 on February 22, 2012, 08:00:05 PM
Do you have pics of the seat and willing to ship it?
Do you have the front turn signal mounts? If so, how much would you take for both of them?

If ANYONE can tell me where to get front turn signal mounts (and turn signals) for this bike I would be grateful. I need the front turnsignals. A previous owner "'hacksawed" them off to fit a fairing.

salukispeed · « **Reply #30 on:** July 16, 2012, 09:38:34 AM »

You see them occasionally on E-Bay but are usually pricy.

SGTBob · « **Reply #31 on:** July 16, 2012, 04:53:44 PM »

Quote from: salukispeed on July 16, 2012, 09:38:34 AM

You see them occasionally on E-Bay but are usually pricy.

Very pricey on Ebay. Including shipping over $200

salukispeed · « **Reply #32 on:** July 17, 2012, 09:29:42 AM »

Did you call or email Western Hills Honda yamaha to see if they might possibly have the set? They are good people and I was able to buy a new rear grab rail from them about a month ago. I paid less for the new rail than they wanted from E-bay for used garbage?

Douglas.birnbaum · « **Reply #33 on:** July 20, 2012, 03:50:07 PM »

I just snapped the bleeder off my front caliper, how much for yours?

Cheers

Doug

Shenanigans · « **Reply #34 on:** July 20, 2012, 05:43:57 PM »

You still have the front wheel? P.M. Sent...

News:

Author Topic: Parting Out a 77 750A (Read 7244 times)