Author Topic: Parting Out a 77 750A (Read 7234 times)

77 CB750A · « **on:** February 20, 2012, 01:41:16 PM »

Guys,

I'm parting out a 77 750a. I have basically everything but the headlight assembly and the gas tank. I also have a complete carb rebuild kit. Let me know what you need.

Blucav85 · « **Reply #1 on:** February 22, 2012, 08:00:05 PM »

Do you have pics of the seat and willing to ship it?

WhyNot2 · « **Reply #2 on:** February 23, 2012, 04:04:02 AM »

Can you show pics?

boatsdickson · « **Reply #3 on:** February 23, 2012, 05:49:23 PM »

What condition are the carb manifold boots in?
I could use a right hand handlebar control also. Interested in both.....Boats

Bill/BentON Racing · « **Reply #4 on:** February 24, 2012, 01:31:16 PM »

Engine?,or T/Q,trans shafts and clutch packs!

Thanks,Bill

HansCB750A · « **Reply #5 on:** February 25, 2012, 11:48:55 AM »

Quote from: 77 CB750A on February 20, 2012, 01:41:16 PM

. Let me know what you need.

I'm looking for a kick start lever. Still available?

Thanks,
Hans

77 CB750A · « **Reply #6 on:** February 25, 2012, 07:29:24 PM »

Thats the one thing I don't have...sorry

HansCB750A · « **Reply #7 on:** February 25, 2012, 10:34:48 PM »

Ok. Thanks.
The quest continues........

Rooster87 · « **Reply #8 on:** February 26, 2012, 07:10:40 AM »

Rear rim any good?

77 CB750A · « **Reply #9 on:** February 29, 2012, 07:02:00 AM »

rear rim is good. I'm told it isnt the base model rim and is an upgrade. I will pull model number or pic to show rim.

chickenman_26 · « **Reply #10 on:** March 08, 2012, 06:38:22 AM »

Quote from: 77 CB750A on February 29, 2012, 07:02:00 AM

rear rim is good. I'm told it isnt the base model rim and is an upgrade. I will pull model number or pic to show rim.

To my knowledge, Honda never offered an upgrade option for the wheels. So I'd be interested to see what you have there, if you ever post a picture.

Stu

77 CB750A · « **Reply #11 on:** March 14, 2012, 03:16:54 PM »

77 CB750A · « **Reply #12 on:** March 14, 2012, 03:17:41 PM »

Front rim is 19"

77 CB750A · « **Reply #13 on:** March 14, 2012, 03:18:24 PM »

77 CB750A · « **Reply #14 on:** March 14, 2012, 03:19:04 PM »

dave the welder · « **Reply #15 on:** March 23, 2012, 05:56:45 PM »

same as on my 77

chickenman_26 · « **Reply #16 on:** March 27, 2012, 05:07:33 AM »

Right. That's no upgrade. Those are both standard rims for that bike.

Stu

JimS63 · « **Reply #17 on:** April 03, 2012, 08:10:14 AM »

You said you sold the tank. Do you still have the petcock available?
How much for the front rim/axle assembly?

rbgltd · « **Reply #18 on:** April 09, 2012, 06:24:04 AM »

ineed a 1976 start switch/right hand control for 750A

clintcd · « **Reply #19 on:** April 14, 2012, 03:03:17 AM »

Hi, I am looking for the grab bar with mounting hardware and rear indicators, are they available,

salukispeed · « **Reply #20 on:** April 14, 2012, 05:42:47 AM »

Good moring I am new here and will fill in any info later today. I am also looking for a rear fender and grab rail with turn signals like the gentleman from Ireland. I have a 77 750 A that runs and drives great but needs years of rust and neglect erased. Can you help
Thank's

Roach Carver · « **Reply #21 on:** April 14, 2012, 07:13:29 AM »

Did the rear rim sell? If not i am interested. I specifically need the rim and spokes

cormiert · « **Reply #22 on:** April 17, 2012, 07:34:47 AM »

I am not a bike person, but the guy I'm posting for is(computer illiterate). What he is wondering is if you have a rear fender. He is also lookng for mufflers - NOS or Re-Pop(means nothing to me). He has a 77 CB750A that he is looking to fix.

Roach Carver · « **Reply #23 on:** April 17, 2012, 08:57:02 AM »

dead thread.

SGTBob · « **Reply #24 on:** May 19, 2012, 04:00:48 PM »

Quote from: Blucav85 on February 22, 2012, 08:00:05 PM

Do you have pics of the seat and willing to ship it?

Do you have the front turn signal mounts? If so, how much would you take for both of them?

News:

Author Topic: Parting Out a 77 750A (Read 7234 times)