Supposed to go pick it up this weekend. I talked a little bit more to the owner. Apparently he let it sit for a few years and mice got into his Kerker exhaust and rusted it out. He said they also got to the wiring a bit. He said "they peed all over it which melted the wiring". Not sure what to think there. But as it sits, it is completely taken apart. Bare frame. He was planning on powder coating it. The Kerker is supposed to be junk, but he said he still has the stocker. He also said he has a set of 29mm smooth bore carbs which were popular hot rodder parts back in the day. He has the original carbs as well, but they need a good going through. As far as paint on the tank, side covers and tail piece, that is yet to be determined. I may end up putting it back together with the smooth bores and a new 4 into 1. I'll probably also put on some lower bars and bar end mirrors. I'll definitely keep all the stock parts for future use. If it is a stock exhaust it is probably better off if I don't run it on the bike. It's basically priceless. I'll post pictures when I get it, although it's probably just going to look like a pile of parts.
