Author Topic: '80 CB650 Bobber project (Read 17210 times)

Statenheimer · « **Reply #25 on:** October 28, 2012, 07:27:54 AM »

Wow man, you have some serious skills. Can't wait to see where it heads next.

Tactical · « **Reply #26 on:** November 13, 2012, 02:41:21 AM »

Finally got the forks back on, starting to get a feel for the lines now..

Tactical · « **Reply #27 on:** November 14, 2012, 03:52:04 PM »

Major disappointment tonight. I dropped the engine in and the shock bottoms right out. I spent a lot of time designing the mounts and positioning it but it's just one of those things that you can't figure out 100% until it's all together. So, it's back to the drawing board for the rear suspension and a ton of tear down, plasma cutting, grinding, measuring, fabbing and welding all over again!

rb550four · « **Reply #28 on:** November 14, 2012, 04:17:37 PM »

Too bad, I really liked what you've done. Wouldn't it be easier to get a stronger shock? ,or design an air bag suspension, or a compressable rubber block set up ? You could be the first kid on the block with something like that.

DustyRags · « **Reply #29 on:** November 14, 2012, 04:45:56 PM »

Oh man, that stinks! I'm with RB550Four- can't you find a stronger shock? Or would that imply some serious stress on the back end?

Tactical · « **Reply #30 on:** November 24, 2012, 05:41:29 PM »

Found the sweet spot! Moved the rear shock mount up. Good travel, allows for shock preload adjustment and I actually like the look better, tends to hide the shock more. Now I just have to wait for some more tube to arrive and find more time to fab up the mount permanently and replace the section were the mount used to be with straight tube.

rb550four · « **Reply #31 on:** November 24, 2012, 05:59:04 PM »

That looks so excellent, glad that you only had to modify your initial design. looks great !

DustyRags · « **Reply #32 on:** November 24, 2012, 09:49:07 PM »

Awesome! I'm seriously envious of that bike!

DV2000NJ · « **Reply #33 on:** November 26, 2012, 07:17:47 AM »

I seriously love this bike. Eerily similar to what I was picturing in my head for my 650 once I get a chance to cut it up.

Statenheimer · « **Reply #34 on:** November 29, 2012, 07:40:39 PM »

Sweet dude. Also glad that it was only modifications, and you were able to keep most of your original design.

Tactical · « **Reply #35 on:** April 04, 2013, 06:44:43 PM »

Been a cold and busy winter! Finally found some time and it warmed up enough so that my hands weren't sticking to the tools! Trying to get her together enough to fire her up and give it a shake down run, then I'll break it back down for paint and details.

DV2000NJ · « **Reply #36 on:** April 06, 2013, 08:20:45 AM »

Glad to see more progress, this is seriously one of my favorite builds on here.

DustyRags · « **Reply #37 on:** April 06, 2013, 05:13:48 PM »

Man, that's coming out sweet!

cheftuskey121 · « **Reply #38 on:** April 06, 2013, 08:21:47 PM »

I don't yet have the skills to do something like this but I absolutely love it! really want one now

Tactical · « **Reply #39 on:** April 10, 2013, 01:03:15 PM »

Got her to fire up today!

DustyRags · « **Reply #40 on:** April 10, 2013, 06:19:10 PM »

Sounds mean!

rb550four · « **Reply #41 on:** April 10, 2013, 06:52:57 PM »

Sounds good ,looks great, is it time for paint now? Wondering what kind of plan you have for that? Can you give us some hints?

Tactical · « **Reply #42 on:** April 22, 2013, 06:16:35 PM »

Right now I'm considering gloss black on the frame and flat black like the tank for the tank and rear fender. Though I may go flat on the frame too. Not sure yet.

Mounted the speedometer tonight. I'm going to go without a tach.

DustyRags · « **Reply #43 on:** April 22, 2013, 09:45:03 PM »

Looks #$%*in'!

Go gloss on the frame. So much is flat black these days without any imagination- if you look at the really sharp ones, the ones that stand out as clean, well-done jobs, you'll notice they all have a variety of textures- flat, satin, semi-gloss and gloss. It makes a serious difference.

Of course, that's just, like, my opinion, man.

JimJamerino · « **Reply #44 on:** April 23, 2013, 07:44:17 AM »

Quote from: DustyRags on April 22, 2013, 09:45:03 PM

Of course, that's just, like, my opinion, man.

The Dude reference boosts the cool factor of this thread roughly 37%.

Also, I dig the speedo mount. I don't think I'd do it to my bike, but I like the alternative placement.

johnsy · « **Reply #45 on:** April 23, 2013, 08:26:31 AM »

Great job. Looking forward to this seeing the finishing move on this one

Tactical · « **Reply #46 on:** May 05, 2013, 08:33:05 PM »

Stripped down and ready to go out for sand blasting and powder coating. Gloss black.

Tactical · « **Reply #47 on:** May 17, 2013, 11:56:20 AM »

Frame is done!!

JimJamerino · « **Reply #48 on:** May 17, 2013, 01:23:35 PM »

It's so shiny!

Tactical · « **Reply #49 on:** May 18, 2013, 08:14:25 PM »

Yeah it's shiny! It came out great!The tank, forks, fender and some small parts will be flat black so it should balance out nicely.

Tank is done...

News:

Author Topic: '80 CB650 Bobber project (Read 17210 times)