« previous next »
Pages: [1]   Go Down

Author Topic: need pic of passenger pegs  (Read 2668 times)

0 Members and 1 Guest are viewing this topic.

Offline pelicanwheel

  • Enthusiast
  • **
  • Posts: 143
need pic of passenger pegs
« on: January 03, 2007, 01:44:28 PM »
Hi gang -

I'm at the point of putting the passaenger pegs back on the restoration project, but think I'm not understanding how they went on.  The braket seems to be much wider than the foot pegs themselves.  I assume there are some type of spacers involved.  Can someone snap a photo of a factory install so that I will know how they should look.

Thanks!

Pelican
Logged

Offline Bob Wessner

  • "Carbs Suck!"
  • Really Old Timer ...
  • *******
  • Posts: 10,079
Re: need pic of passenger pegs
« Reply #1 on: January 03, 2007, 01:47:06 PM »
What year/model bike??
Logged
We'll all be someone else's PO some day.

Offline pelicanwheel

  • Enthusiast
  • **
  • Posts: 143
Re: need pic of passenger pegs
« Reply #2 on: January 03, 2007, 02:56:12 PM »
its for a 76 honda cb750 K
Logged

Offline Bob Wessner

  • "Carbs Suck!"
  • Really Old Timer ...
  • *******
  • Posts: 10,079
Re: need pic of passenger pegs
« Reply #3 on: January 03, 2007, 04:38:58 PM »
This is from an earlier K parts list, but assuming you have the 4-into-4 exhaust the mounting to the rear exhaust hanger bolts should be the same, or similar. Hope you can make out the detail of the smaller parts associated with the pegs themselves.
Logged
We'll all be someone else's PO some day.

Offline pelicanwheel

  • Enthusiast
  • **
  • Posts: 143
Re: need pic of passenger pegs
« Reply #4 on: January 04, 2007, 07:34:45 AM »
Thanks Bob -

There appears to be a washer in your diagram.  Perhaps that is to take up the slack.  Does anyone know how thick it is?

Pelican
Logged

Offline bryanj

  • Really Old Timer ...
  • *******
  • Posts: 14,076
  • CB500 Number 1000036
Re: need pic of passenger pegs
« Reply #5 on: January 04, 2007, 07:45:25 AM »
which part number?
Logged
Semi Geriatric ex-Honda mechanic and MOT tester (UK version of annual inspection). Garage full of "projects" mostly 500/4 from pre 73 (no road tax in UK).

Remember "Its always in the last place you look" COURSE IT IS YOU STOP LOOKIN THEN!

Offline dagersh

  • "A country attempting to tax itself into prosperity is akin to a man standing in a bucket attempting to lift that bucket by its handle. - Winston Churchill"
  • Expert
  • ****
  • Posts: 1,010
    • Photos
Re: need pic of passenger pegs
« Reply #6 on: January 04, 2007, 04:58:00 PM »
Pelican,

Here is a parts fiche for a US bike, with the passenger pegs being round.  Hopefully this will help.

http://www.crotchrocket.com/fiche_image_popup.asp?fveh=2991&section=125629&year=1976&make=Honda&category=Motorcycles&dc=947&name=MUFFLER

Gersh
Logged
1962 CA95
1966 Black Bomber
1966 CA77 Dream
1967 Superhawk
1970 CB750K0
1972 CL350
1972 CB450/500 Custom
1972 CB500K1
1975 CB550F
1976 CB400F
1975 CB750 Future Restoration
1976 CB750K6
1976 CB750F
1976 GL1000


1968 Suzuki T500 Cobra
1990 BMW K1
2001 'Busa
2003 RC 51
Bunch of Guzzi's

http://www.sohc4.us/gallery/v/members/personal/dagersh/

Offline pelicanwheel

  • Enthusiast
  • **
  • Posts: 143
Re: need pic of passenger pegs
« Reply #7 on: January 05, 2007, 09:06:28 AM »
well...it's hard to tell with the diagrams, but it looks like there is no spacer.  I guess the peg (part 24 in the first diagram posted, part 16 in the other) is suppose to be that loose of a fit within the bracket.  The washer, I thought was for spacing (part 23),  goes outside the bracket to keep the split pin from coming back through.

I guess if anyone has a clear picture of a real bike would be better for me.

Thanks!

Pelican
Logged

Offline bryanj

  • Really Old Timer ...
  • *******
  • Posts: 14,076
  • CB500 Number 1000036
Re: need pic of passenger pegs
« Reply #8 on: January 05, 2007, 09:42:00 AM »
they are fairly loose on the pin as the rubber, along with the big square washer keeps them tight to the bracket so they dont slop and rattle.
Logged
Semi Geriatric ex-Honda mechanic and MOT tester (UK version of annual inspection). Garage full of "projects" mostly 500/4 from pre 73 (no road tax in UK).

Remember "Its always in the last place you look" COURSE IT IS YOU STOP LOOKIN THEN!

Offline Bob Wessner

  • "Carbs Suck!"
  • Really Old Timer ...
  • *******
  • Posts: 10,079
Re: need pic of passenger pegs
« Reply #9 on: January 05, 2007, 10:33:13 AM »
Quote from: pelicanwheel on January 05, 2007, 09:06:28 AM
well...it's hard to tell with the diagrams, but it looks like there is no spacer.  I guess the peg (part 24 in the first diagram posted, part 16 in the other) is suppose to be that loose of a fit within the bracket.  The washer, I thought was for spacing (part 23),  goes outside the bracket to keep the split pin from coming back through.

I guess if anyone has a clear picture of a real bike would be better for me.

Thanks!

Pelican

Hope these help. Note, it appears the pivot pin and associated cotter pin should be facing to the rear according to the parts diagram. These pics are from an earlier K model.
Logged
We'll all be someone else's PO some day.

Offline pelicanwheel

  • Enthusiast
  • **
  • Posts: 143
Re: need pic of passenger pegs
« Reply #10 on: January 05, 2007, 09:01:34 PM »
ah ha!!!!!!  Thanks Bob.

So the problem is that my brakets are somehow missing the two spacers that appears to be welded in on your pic.  I'm thinking that they must have fallen out.  Perhaps when the powder coaterer sandblasted them.  I guess regular washers will work.

Pelican
Logged
Pages: [1]   Go Up
« previous next »