« previous next »
Pages: [1]   Go Down

Author Topic: High temp clear coat for engine side covers?  (Read 1417 times)

0 Members and 1 Guest are viewing this topic.

Offline Anton

  • Enthusiast
  • **
  • Posts: 202
High temp clear coat for engine side covers?
« on: March 18, 2014, 08:23:20 PM »
I cleaned up my engine side covers and breather cover and clear coated them. I just used regular clear coat, will this be a problem?
Logged

Offline mrbreeze

  • Not your average
  • Really Old Timer ...
  • *******
  • Posts: 5,902
  • Shut up when you're talkin' to me!!
Re: High temp clear coat for engine side covers?
« Reply #1 on: March 18, 2014, 09:09:01 PM »
Yep!!!
Logged
MEMBER # 257
Fool me once..shame on you. Fool me twice..I'm kickin' your a$$......

Offline thep1pe

  • Enthusiast
  • **
  • Posts: 157
  • Proud Owner 76 CB550F1
Re: High temp clear coat for engine side covers?
« Reply #2 on: March 19, 2014, 03:57:51 AM »
Bad idea. They will most likely go yellow and will probably lift off when fuel/oil gets at them. Take off the clear coat and polish them. When you wash the bike just give them a rub with polish and they will not degrade.
Logged

Offline Anton

  • Enthusiast
  • **
  • Posts: 202
Re: High temp clear coat for engine side covers?
« Reply #3 on: March 19, 2014, 06:40:10 AM »
Dammit! Lesson learned. Thanks guys
Logged

Black 750K8

  • Guest
Re: High temp clear coat for engine side covers?
« Reply #4 on: March 19, 2014, 09:36:42 AM »
Quote from: Anton on March 19, 2014, 06:40:10 AM
Dammit! Lesson learned. Thanks guys

I thought you learned your lesson with the fork tubes :D Have you coated anything else on that bike? Just a little friendly rassing ;D
Logged

Offline LesterPiglet

  • Old Timer
  • ******
  • Posts: 4,045
  • 1977 CB550F2
Re: High temp clear coat for engine side covers?
« Reply #5 on: March 19, 2014, 10:01:11 AM »
Powder coated the camshaft and crank?  :P
Logged
'Then' and 'than' are completely different words and have completely different meanings. Same with 'of' and 'have'. Set and sit. There, their and they're. Draw and drawer. Could care less/couldn't care less. Bought/brought FFS.


Les Ross.            Certified by a Professional

Offline Anton

  • Enthusiast
  • **
  • Posts: 202
Re: High temp clear coat for engine side covers?
« Reply #6 on: March 19, 2014, 10:06:09 AM »
Those are two different lessons!
Logged

Markcb750

  • Guest
Re: High temp clear coat for engine side covers?
« Reply #7 on: March 19, 2014, 10:23:27 AM »
This is progess by the scientific method, don't sweat it.



Logged

Offline Lostboy Steve

  • Old Timer
  • ******
  • Posts: 3,098
Re: High temp clear coat for engine side covers?
« Reply #8 on: March 19, 2014, 01:37:03 PM »
Polish them and have them powdercoated with a Clear powder.
Logged
1968 Honda Z50
1977 Honda CB550K
2018 Indian Scout

Offline Retro Rocket

  • Eggs are hard due too a
  • Really Old Timer ...
  • *******
  • Posts: 19,214
  • ROCK & ROLL
Re: High temp clear coat for engine side covers?
« Reply #9 on: March 19, 2014, 02:02:22 PM »
Quote from: twistedengineering on March 19, 2014, 01:37:03 PM
Polish them and have them powdercoated with a Clear powder.

And slow down and ask questions, its far cheaper.... 8)
Logged
750 K2 1000cc
750 F1 970cc
750 Bitsa 900cc
If You can't fix it with a hammer, You've got an electrical problem.

Offline Powderman

  • Master
  • *****
  • Posts: 2,462
    • Creative Candy Powder Coating
Re: High temp clear coat for engine side covers?
« Reply #10 on: March 19, 2014, 09:45:51 PM »
There's no need for high temp coating on those parts if using powder. Standard powder is good for spikes of temps to 500*. Those parts won't get anywhere near that temp.
Logged
Pages: [1]   Go Up
« previous next »