« previous next »
Pages: [1]   Go Down

Author Topic: 550 K0 press in jets, which way is up?  (Read 869 times)

0 Members and 1 Guest are viewing this topic.

DH

  • Guest
550 K0 press in jets, which way is up?
« on: July 28, 2014, 11:43:02 AM »
I used to know this but forgot. I look at the main jet thru one end, then the other, and it looks different both ways. A "shallow" end and a "deep" end? Which end of the jet is pressed into the carb body? Someone please kick me in the head... :P
Logged

Offline goldarrow

  • one day, i'll be an
  • Old Timer
  • ******
  • Posts: 3,360
Re: 550 K0 press in jets, which way is up?
« Reply #1 on: July 28, 2014, 11:45:27 AM »
the small groove for oring and it goes up, large groove for leave spring
Logged
Life Is Full Of Challenges - And My Backyard Is Full Of SOHC4's

CB550 K0
CB750 K0, K2, K23 JDM, K45, K5
And the little ones z50r, xr50r, st90


750k5 http://forums.sohc4.net/index.php?topic=114817.0

DH

  • Guest
Re: 550 K0 press in jets, which way is up?
« Reply #2 on: July 28, 2014, 11:50:28 AM »
Thank you sir. And thanks for not kicking hard :)
I never thought to check the grooves, i always looked inside.
But, whatever works :D
Logged

Offline MoMo

  • Really Old Timer ...
  • *******
  • Posts: 8,271
  • Ride like you're invisible
Re: 550 K0 press in jets, which way is up?
« Reply #3 on: July 28, 2014, 02:13:01 PM »
looking inside can tell you the direction too-the tapered opening would go towards the bowl
Logged

Offline TwoTired

  • Really Old Timer ...
  • *******
  • Posts: 21,802
Re: 550 K0 press in jets, which way is up?
« Reply #4 on: July 28, 2014, 02:22:05 PM »
When installed, you should still be able to see the jet size number.
Logged
Lloyd... (SOHC4 #11 Original Mail List)
72 500, 74 550, 75 550K, 75 550F, 76 550F, 77 550F X2, 78 550K, 77 750F X2, 78 750F, 79CX500, 85 700SC, GL1100

Those that learn from history are doomed to repeat it by those that don't learn from history.

DH

  • Guest
Re: 550 K0 press in jets, which way is up?
« Reply #5 on: July 28, 2014, 07:10:17 PM »
Thanks again folks. I'd bet many a P.O. have put them in wrong as well.
Always helps to ask questions :)
Logged

Offline Deltarider

  • Really Old Timer ...
  • *******
  • Posts: 8,611
Re: 550 K0 press in jets, which way is up?
« Reply #6 on: July 28, 2014, 11:23:36 PM »
Quote
looking inside can tell you the direction too-the tapered opening would go towards the bowl
Mine don't. Tapered opening is where the tapered needle finds it's place. Easy to remember.




Logged
CB500K2-ED Excel black
"There's enough for everyone's need, not enough for anyone's greed." Mahatma Ghandi
Pages: [1]   Go Up
« previous next »