« previous next »
Pages: [1]   Go Down

Author Topic: Rear Brake is Trying to Kill Me!  (Read 1323 times)

0 Members and 1 Guest are viewing this topic.

Offline Mo

  • Hot Shot
  • ***
  • Posts: 584
Rear Brake is Trying to Kill Me!
« on: September 04, 2014, 03:33:27 PM »
Rear brake pretty much just snapped, locking up my rear wheel.









I'm glad I was pulling off a stop, so I was able to bring her to a stop on the side of the road. I've ordered most parts to fix. Can't for the life of me find the rear stopper bolt...

Could have been worse!

Logged

Offline Vinhead1957

  • Expert
  • ****
  • Posts: 1,196
Re: Rear Brake is Trying to Kill Me!
« Reply #1 on: September 04, 2014, 04:09:38 PM »
Very lucky
Logged

Offline albertaboy

  • No way I'm a
  • Hot Shot
  • ***
  • Posts: 395
Re: Rear Brake is Trying to Kill Me!
« Reply #2 on: September 04, 2014, 04:11:15 PM »
Yup. Heard of it happening to the PO of my bike. Glad your ok.
Logged
1975 CB750K
No where to go and all day to get there.
My build thread: http://forums.sohc4.net/index.php?topic=131424.0

Offline 70CB750

  • Labor omnia vincit improbus.
  • Really Old Timer ...
  • *******
  • Posts: 14,840
  • Northern Virginia
Re: Rear Brake is Trying to Kill Me!
« Reply #3 on: September 04, 2014, 05:02:23 PM »
Glad you ok!
Logged
Prokop
_______________
Pure Gas - find ethanol free gas station near you

I love it when parts come together.

Dorothy - my CB750
CB750K3F - The Red
Sidecar


CB900C

2006 KLR650

Offline brandEn

  • Old Timer
  • ******
  • Posts: 3,202
Re: Rear Brake is Trying to Kill Me!
« Reply #4 on: September 04, 2014, 05:28:07 PM »
Glad your OK! But man look at the corrosion on that brake stay. Seriously inspect your bike for any more rust and rot. That part was not safe to be on your bike.
Logged

Offline Bodi

  • Really Old Timer ...
  • *******
  • Posts: 5,763
Re: Rear Brake is Trying to Kill Me!
« Reply #5 on: September 04, 2014, 06:08:51 PM »
No picture shows the brake stay very well, but it's not very rusty - the rusty part is at the brake pedal end of the actuating rod.
The attaching bolt hole on the stay looks undamaged - it appears the bolt just came loose and fell off. This fastener has a split pin keeping the nut from falling off for good reason, this demonstrates why!
Logged

Offline Don R

  • My Sandcast is a
  • Really Old Timer ...
  • *******
  • Posts: 21,615
  • Saver of unloved motorcycles.
Re: Rear Brake is Trying to Kill Me!
« Reply #6 on: September 04, 2014, 06:20:24 PM »
The picture must be decieving, the brake stay looks bad when it's blown up big, if the bolt fell out first what do you think caused it to snap?
Logged
No matter how many times you paint over a shadow, it's still there.
 CEO at the no kill motorcycle shop.
 You don't need a weatherman to know which way the wind blows.

Offline goldarrow

  • one day, i'll be an
  • Old Timer
  • ******
  • Posts: 3,360
Re: Rear Brake is Trying to Kill Me!
« Reply #7 on: September 04, 2014, 08:09:45 PM »

Quote from: Bodi on September 04, 2014, 06:08:51 PM
No picture shows the brake stay very well, but it's not very rusty - the rusty part is at the brake pedal end of the actuating rod.
The attaching bolt hole on the stay looks undamaged - it appears the bolt just came loose and fell off. This fastener has a split pin keeping the nut from falling off for good reason, this demonstrates why!

+1 pin came off, then the nut, then the bolt, then the brake plate spin, then the brake rod wrapped around axle spacer
Logged
Life Is Full Of Challenges - And My Backyard Is Full Of SOHC4's

CB550 K0
CB750 K0, K2, K23 JDM, K45, K5
And the little ones z50r, xr50r, st90


750k5 http://forums.sohc4.net/index.php?topic=114817.0

Offline Stev-o

  • Ain't no
  • Really Old Timer ...
  • *******
  • Posts: 35,228
  • Central Texas
Re: Rear Brake is Trying to Kill Me!
« Reply #8 on: September 04, 2014, 08:27:41 PM »
Quote from: goldarrow on September 04, 2014, 08:09:45 PM

Quote from: Bodi on September 04, 2014, 06:08:51 PM
No picture shows the brake stay very well, but it's not very rusty - the rusty part is at the brake pedal end of the actuating rod.
The attaching bolt hole on the stay looks undamaged - it appears the bolt just came loose and fell off. This fastener has a split pin keeping the nut from falling off for good reason, this demonstrates why!

+1 pin came off, then the nut, then the bolt, then the brake plate spin, then the brake rod wrapped around axle spacer

OR... the pin was not properly replaced last time the rear wheel was put on.  I'd say the rider was very lucky.  If you paid to have that wheel installed, you should be going to have a talk with someone.
Logged
'74 "Big Bang" Honda 750K [836].....'76 Honda 550F.....K3 Park Racer!......and a Bomber!............plus plus plus.........

Offline welard

  • Full Member
  • *
  • Posts: 39
  • is this the dude from Highlander?? Oh sht, it is..
Re: Rear Brake is Trying to Kill Me!
« Reply #9 on: September 05, 2014, 01:32:11 AM »
Can't ask for a better excuse to start a rebuild......Yay...rebuild!!!!
Logged

Offline evanphi

  • Apparently I'm an
  • Old Timer
  • ******
  • Posts: 3,106
  • Rhonda the Basket Case
Re: Rear Brake is Trying to Kill Me!
« Reply #10 on: September 08, 2014, 05:41:32 AM »
:| That would be terrifying.
Logged
--Evan

1975 CB750K "Rhonda"
Delkevic Stainless 4-1 Header, Cone Engineering 18" Quiet Core Reverse Cone, K&N Filter in Drilled Airbox
K5 Crankcase/Frame, K4 Head and Cylinders, K1 Carbs (42;120;1 Turn)

She's a mix-matched (former) basket case, but she's mine.

CB750 Shop Manual (all years), searchable text PDF
Calculating the correct input circumference for digital speedometers connected to the original speedometer drive

Offline Mo

  • Hot Shot
  • ***
  • Posts: 584
Re: Rear Brake is Trying to Kill Me!
« Reply #11 on: September 08, 2014, 07:16:26 AM »
Quote from: Stev-o on September 04, 2014, 08:27:41 PM
Quote from: goldarrow on September 04, 2014, 08:09:45 PM

Quote from: Bodi on September 04, 2014, 06:08:51 PM
No picture shows the brake stay very well, but it's not very rusty - the rusty part is at the brake pedal end of the actuating rod.
The attaching bolt hole on the stay looks undamaged - it appears the bolt just came loose and fell off. This fastener has a split pin keeping the nut from falling off for good reason, this demonstrates why!

+1 pin came off, then the nut, then the bolt, then the brake plate spin, then the brake rod wrapped around axle spacer

OR... the pin was not properly replaced last time the rear wheel was put on.  I'd say the rider was very lucky.  If you paid to have that wheel installed, you should be going to have a talk with someone.

More or less this.

Bike was tipped over a few weeks back. Since that happened, I noticed the rear was a little twitchy, but quick visual inspections didn't show anything. Fast forward a few weeks, the bolt just comes loose. Somehow the cotter pin fell out and the nut undid itself. I found the bolt on the side of the road and the washer on my swingarm. Lucky as hell as I was going slow, and a lesson learned. I guess TCLOCS is a thing for a reason. All the parts I need I am waiting to arrive. Replaced the nut with a nylock and installed a cotter pin. 
Logged

Offline jamesbekman

  • Hot Shot
  • ***
  • Posts: 380
Re: Rear Brake is Trying to Kill Me!
« Reply #12 on: September 08, 2014, 07:27:41 AM »
This basically happened due to not having a cotter pin in place correct?
Logged

Offline Mo

  • Hot Shot
  • ***
  • Posts: 584
Re: Rear Brake is Trying to Kill Me!
« Reply #13 on: September 08, 2014, 07:29:49 AM »
I believe the cotter pin is supposed to be some sort of back-up. In case he nut comes loose, the pin will at least ensure the bolt won't pull out and the rear is still semi-useable. When the pin falls out, nothing stops the nut from coming completely off, and the bolt backing all the way out. So then the entire rear brake just fails.
Logged

Offline thep1pe

  • Enthusiast
  • **
  • Posts: 157
  • Proud Owner 76 CB550F1
Re: Rear Brake is Trying to Kill Me!
« Reply #14 on: September 08, 2014, 08:39:20 AM »
Never seen a properly fitted split pin fall out.


Sent from my iPad using Tapatalk
Logged

Offline Mo

  • Hot Shot
  • ***
  • Posts: 584
Re: Rear Brake is Trying to Kill Me!
« Reply #15 on: September 08, 2014, 08:43:54 AM »
Quote from: thep1pe on September 08, 2014, 08:39:20 AM
Never seen a properly fitted split pin fall out.


Sent from my iPad using Tapatalk

Congrats!   ;D
Logged

Offline chung

  • Hot Shot
  • ***
  • Posts: 335
  • Giddy Up
    • chungfucycles.com
Re: Rear Brake is Trying to Kill Me!
« Reply #16 on: September 08, 2014, 06:07:48 PM »
  My Liver is trying to kill me. IF somebody treated me like that, I,d be pretty pissed off and looking for some payback too.  :'(
  Nothing liasts forever.
Logged
Member#2815
1971/76 CB750 Hack @970cc,
1975 CG750K
1970 CB350,
1972 YDS7, 250
1972 YR5, 350
1977 RD400,
1978 Piaggio Grande/Batavas HS50 Special
1981 XS650 Special II

Offline Mo

  • Hot Shot
  • ***
  • Posts: 584
Re: Rear Brake is Trying to Kill Me!
« Reply #17 on: September 08, 2014, 06:09:02 PM »
Quote from: chung on September 08, 2014, 06:07:48 PM
  My Liver is trying to kill me. IF somebody treated me like that, I,d be pretty pissed off and looking for some payback too.  :'(
  Nothing liasts forever.

Best way to fix that is with some JD. (Sorry about the homicidal liver though)
Logged
Pages: [1]   Go Up
« previous next »