Author Topic: 77 faux drag bike (Read 3397 times)

Milunchbox12 · « **on:** January 20, 2015, 08:05:30 AM »

77 cb750 gonna put an 850 kit on it from cycle x polish things and make it a little quicker. This is how she sits today.

Restoration Fan · « **Reply #1 on:** January 20, 2015, 11:56:07 AM »

Might wanna raise the frame a bit.

754 · « **Reply #2 on:** January 20, 2015, 03:37:14 PM »

I think the faux should be used with cafe racer a lot of the time.
Cool start on a bike..looks like..

seanbarney41 · « **Reply #3 on:** January 20, 2015, 03:53:22 PM »

I think faux should be used with a lotta bikes a lot of the time.
I want to do a drag bike for the street someday. I would probably end up using the stock frame and strutting it. Then I would probably actually take it to the track. Then it probably wouldn't be a street bike anymore

Riceman · « **Reply #4 on:** January 20, 2015, 07:23:39 PM »

I will make sure to take mine to at least one (1) cafe...

Where did you get the frame ?

754 · « **Reply #5 on:** January 20, 2015, 07:44:23 PM »

Quote from: seanbarney41 on January 20, 2015, 03:53:22 PM

I think faux should be used with a lotta bikes a lot of the time.
I want to do a drag bike for the street someday. I would probably end up using the stock frame and strutting it. Then I would probably actually take it to the track. Then it probably wouldn't be a street bike anymore

I strutted my stock frame and ran at the drags a few years, then it went back to street, including a few 500 mile days... It was a faux king rough ride.... But fun on the street.

seanbarney41 · « **Reply #6 on:** January 20, 2015, 07:52:12 PM »

I got no problems with hardtail/struts on the street. Just run some footpegs that you can stand up on, not forward controls...ride all day.

Subscribed and looking forward to how this comes out.

754 · « **Reply #7 on:** January 20, 2015, 08:11:02 PM »

Mid pegs makes all the difference..

Milunchbox12 · « **Reply #8 on:** January 21, 2015, 07:10:00 AM »

Yeah ill make some mids and most of the other parts I need.

Mcwilliams570 · « **Reply #9 on:** January 22, 2015, 03:32:53 AM »

Looks like a good start.. I have a question for you guys anyone have a picture of mid pegs. I know what forward controls are and where they are usually placed but would like to see where the mid sit at since I am doing a similar project always good to have future ideas.

Matt

goldarrow · « **Reply #10 on:** January 22, 2015, 03:59:32 AM »

I'm thinking mid pegs are mounted somewhere in the middle between front and rear engine mount?

Mcwilliams570 · « **Reply #11 on:** January 22, 2015, 04:03:33 AM »

Yeah just want a picture to see the placement of things. How you been doing Gold..

Matt

Milunchbox12 · « **Reply #12 on:** January 22, 2015, 08:41:33 AM »

Once I get to that point which will be a couple of weeks I'll send them.

Kustomizer · « **Reply #13 on:** January 22, 2015, 01:55:00 PM »

Looks like a cool build. I have the same plane for a future project. Can't wait to see how yours turns out.

Milunchbox12 · « **Reply #14 on:** January 22, 2015, 05:34:15 PM »

Tire mounted on a 15in rim.

Milunchbox12 · « **Reply #15 on:** January 22, 2015, 05:35:13 PM »

Headlight and tail light

754 · « **Reply #16 on:** January 22, 2015, 08:20:55 PM »

We usually. Run the stock pegs..or stock holders with other pegs..

Milunchbox12 · « **Reply #17 on:** February 12, 2015, 07:41:20 PM »

Got to a roller.

754 · « **Reply #18 on:** February 12, 2015, 09:01:26 PM »

That thing begs to have coupons, or upturned superbike bars.

Milunchbox12 · « **Reply #19 on:** February 13, 2015, 07:09:42 AM »

754 what do up turns look like?

754 · « **Reply #20 on:** February 13, 2015, 07:42:13 AM »

I meant up ended, trying to get a pic.

Trad · « **Reply #21 on:** February 13, 2015, 09:18:39 AM »

This thing is coming together nicely. Cool concept man.

Milunchbox12 · « **Reply #22 on:** February 13, 2015, 09:47:26 AM »

754 who sells those?

Trad · « **Reply #23 on:** February 13, 2015, 10:31:39 AM »

Those just look like Renthal's flipped upside down. Search low rise superbike bars, or Renthal lows. Plenty of options on DCC and other on-line retailers.

Milunchbox12 · « **Reply #24 on:** February 13, 2015, 10:38:21 AM »

I was thinking about using tracker bars

News:

Author Topic: 77 faux drag bike (Read 3397 times)