Author Topic: 400 F1 Harness routing  (Read 580 times)

0 Members and 1 Guest are viewing this topic.

Offline XJRMAN

  • Full Member
  • *
  • Posts: 5
400 F1 Harness routing
« on: January 25, 2016, 07:15:54 AM »
DOH!!! it all seemed so obvious when I took it apart. 

I am putting my restored 400 4 back together but I am buggered if I can find my photos that show the routing of the harness.

If anyone has a picky of which bits go into the headlight shell or any detailed shots of the route of the harness i would be very grateful. I could probably work it out by trail and error from the wiring diagram but you what what they say about a picture says a thousand words.

Thanks in advance. Anyone one in W Yorks who has one for me to have a look at would be even better (I can bring beer)

Graham g.forbes@btinternet.com   07920 728506

Offline Tim2005

  • Expert
  • ****
  • Posts: 1,482
Re: 400 F1 Harness routing
« Reply #1 on: January 25, 2016, 11:31:33 AM »
Hi, yes it is tricky, it doesn't seem logical how the handlebar switch swires go in particular. The diagrams you need are in the Honda manual here, p110 

http://manuals.sohc4.net/cb350/service_manual/SM350400_3.pdf