haha, thought mine was a "basket case"

here's what I started with:

basically, a K2 frame en front end. With K7 engine, and rear.
did a quick rewire and mounted round top carbs

so after about 10years it was alive again.
With my first bike (CB750 F2) I made he mistake to pull it apart without knowing what I had. So had to rebuild the engine after about 600 miles...
Didn't want to make that mistake again so I ran the K2 for about a year before tearing it down. It turned out to be a really good motor!


then started the rebuild, found a K2 tank, modified the frame, installed frame kit:

blasted and painted all the parts

till we got to this point!

at a local bike show this weekend

