Author Topic: Wiring in cb400  (Read 1854 times)

0 Members and 1 Guest are viewing this topic.

Offline Dingo707

  • Full Member
  • *
  • Posts: 1
Wiring in cb400
« on: March 28, 2017, 04:40:21 PM »
Hi all... i got a project bike from a good neighbor.. its a 78 cb400t.  Runs great. I want to basically strip it down to only have essentials... head light and tail light... my question is... is there away to figure out what wires are only needed for those or is there a simple wire harness i can buy? I'm asking bc he has already stripped it down and now wires are a bit everywhere

Offline CBJoe

  • Master
  • *****
  • Posts: 1,976
Re: Wiring in cb400
« Reply #1 on: March 28, 2017, 06:16:34 PM »
The Honda Twins forum may be better served for that type of Info

http://www.hondatwins.net/forums/15-sohc-twins-125-250-400-450-cb-cm-n-rebels-1978-2008

Cheers, Joe
'07 Bonneville Black
'15 Moto Guzzi California 1400
CB750K2 Hot Rod Revival http://forums.sohc4.net/index.php/topic,171693.0.html
'65 CB77
'66 CM91 (C90'ish)

Offline strynboen

  • Old Timer
  • ******
  • Posts: 4,884
    • http://forums.sohc4.net/index.php?PHPSESSID=gnflg2g0l1ve5oq4ni6nmjvem1&/topic,60973.0.html
Re: Wiring in cb400
« Reply #2 on: March 29, 2017, 06:55:31 AM »
cb 400/n- twin are a newer bike then sohc..and use a different ignision system..so nothing/ in common vith cal"s simpel diagram..better go to a spec forum for korrekt help. ..
.like cb- joe already..vrote..
« Last Edit: March 29, 2017, 06:58:30 AM by strynboen »
i kan not speak english/but trying!!
http://forums.sohc4.net/index.php?topic=60973.0
http://forums.sohc4.net/index.php?topic=144758.0
i hate all this v-w.... vords

Offline strynboen

  • Old Timer
  • ******
  • Posts: 4,884
    • http://forums.sohc4.net/index.php?PHPSESSID=gnflg2g0l1ve5oq4ni6nmjvem1&/topic,60973.0.html
Re: Wiring in cb400
« Reply #3 on: March 29, 2017, 11:28:15 AM »
yes you are just send a vrong  simplyed diragram to make him Sharp and ready for a nice vire hack job.. 8) 8).
.just like the" cut  in half trippel" cbx engine ..


its not only ignision..the battery load system are elektronic..and dont match the sohc area bikes either
« Last Edit: March 29, 2017, 11:30:28 AM by strynboen »
i kan not speak english/but trying!!
http://forums.sohc4.net/index.php?topic=60973.0
http://forums.sohc4.net/index.php?topic=144758.0
i hate all this v-w.... vords

Offline strynboen

  • Old Timer
  • ******
  • Posts: 4,884
    • http://forums.sohc4.net/index.php?PHPSESSID=gnflg2g0l1ve5oq4ni6nmjvem1&/topic,60973.0.html
Re: Wiring in cb400
« Reply #4 on: March 30, 2017, 06:51:03 AM »
think its you vho pokes the vrong place..Again.
.but im aut of this thread.
.thred starter have prob faund the right place to find exact info..

so ve can go back to stering damper and oil and tires..and popcorn..and some motorcycling..
i kan not speak english/but trying!!
http://forums.sohc4.net/index.php?topic=60973.0
http://forums.sohc4.net/index.php?topic=144758.0
i hate all this v-w.... vords