Author Topic: Cobra motor disassembly and rebuild (Read 109785 times)

gschuld · « **Reply #775 on:** January 20, 2017, 02:51:08 PM »

Quote from: MRieck on January 20, 2017, 01:01:42 PM

Quote from: gschuld on January 19, 2017, 11:37:24 AM
Sure is, Russ Collins before he became "famous". 1971 or 1972, single engine, Ralph Muldoon aluminum dragster chassis. Pepco blower, nitro methane injected.

Good stuff.
Saw a Muldoon frame drag bike on a dyno last week.

Not something you see every day...

Very cool

George

MRieck · « **Reply #776 on:** January 21, 2017, 07:08:40 AM »

Quote from: bwaller on January 20, 2017, 02:08:52 PM

Saw a Muldoon frame drag bike on a dyno last week.

Ahhh, anybody we know?

He's not on the forum Brent. Very hot 836 engine.....should work very well.

MRieck · « **Reply #777 on:** January 21, 2017, 03:26:27 PM »

Quote from: MRieck on January 21, 2017, 07:08:40 AM

Quote from: bwaller on January 20, 2017, 02:08:52 PM
Saw a Muldoon frame drag bike on a dyno last week.

Ahhh, anybody we know?
He's not on the forum Brent. Very hot 836 engine.....should work very well.

Hopefully he gets down to Valdosta. He's an older fella getting back into racing. Super nice guy. It should fly pretty good......maybe 9's with some practice or a seasoned rider. I'll have to go up to New Hampshire and see it run.

Bill/BentON Racing · « **Reply #778 on:** January 22, 2017, 05:09:36 PM »

Here's some excellent hi performance duct tape! Lol, Bill

dragracer · « **Reply #779 on:** January 22, 2017, 06:07:46 PM »

Hey Bill, thanks for coming to the meeting yesterday. We at least got Mike to consider reducing the number of races. Not sure what else productive was accomplished. Nevertheless, we'll make as many as possible.

And I appreciate you bringing the valve cover. It'll probably be my only piece of bling on the engine, thanks to you.

Jerry Rxman Griffin aka MuthaF'er · « **Reply #780 on:** January 22, 2017, 06:39:37 PM »

Quote from: Bill/BentON Racing on January 22, 2017, 05:09:36 PM

Here's some excellent hi performance duct tape! Lol, Bill

Send him some Falcons place mats......

Sam Green Racing · « **Reply #781 on:** January 23, 2017, 02:13:48 AM »

Quote from: dragracer on January 20, 2017, 05:37:24 AM

We need that picture of Bill on Purple Rain.

I only have one from my Kaw.

Medyo Bastos · « **Reply #782 on:** January 26, 2017, 03:59:44 PM »

Quote from: MRieck on January 20, 2017, 01:01:42 PM

Quote from: gschuld on January 19, 2017, 11:37:24 AM
Sure is, Russ Collins before he became "famous". 1971 or 1972, single engine, Ralph Muldoon aluminum dragster chassis. Pepco blower, nitro methane injected.

Good stuff.
Saw a Muldoon frame drag bike on a dyno last week.

I'd like to have a Muldoon frame myself

Sent from my iPhone using Tapatalk

Bill/BentON Racing · « **Reply #783 on:** January 29, 2017, 07:59:32 PM »

Well, not sure who made it yet, Kosman looking kinda, I know I like it, the work looks professional. Looks promising. Gotta get busy, Bill

Bill/BentON Racing · « **Reply #784 on:** January 31, 2017, 08:56:37 PM »

Here you go. Single digit bike, Yippee Kai Yeah! Lol, I'm a certified Honda 750 nut!

, Bill

dragracer · « **Reply #785 on:** January 31, 2017, 09:36:17 PM »

Something tells me we'll see a single digit Honda going down the track in 2017.

kmb69 · « **Reply #786 on:** February 01, 2017, 07:50:04 AM »

Quote from: dragracer on January 31, 2017, 09:36:17 PM

Something tells me we'll see a single digit Honda going down the track in 2017.

Pretty sure you are correct!

And.....it won't require a blower or N2O!!!!!

dragracer · « **Reply #787 on:** February 01, 2017, 10:24:25 AM »

Quote from: kmb69 on February 01, 2017, 07:50:04 AM

Quote from: dragracer on January 31, 2017, 09:36:17 PM
Something tells me we'll see a single digit Honda going down the track in 2017.

Pretty sure you are correct!

And.....it won't require a blower or N2O!!!!!

Great to know someone is shooting for the nine second zone, N/A. My pockets are shallow and resources limited for that type package so I won't be attempting that particular record. I'm sticking with a poor man's method of making power. 😁

Bill/BentON Racing · « **Reply #788 on:** February 20, 2017, 06:55:50 PM »

I wish mine had lasted this long! Lol

Bill/BentON Racing · « **Reply #789 on:** July 02, 2017, 07:35:09 AM »

Well, after 6 weeks, I can finally wrench again. So back at it, got to get ready for Galot, 1/8 mile! Gotta rebuild F brake m/cylinder and maybe caliper also. Oil pump needs Elan's kit also. Check fuel delivery and time to crank Patches again!

Jerry Rxman Griffin aka MuthaF'er · « **Reply #790 on:** July 02, 2017, 08:31:43 AM »

Great news Bill. Get at it

dragracer · « **Reply #791 on:** July 02, 2017, 08:53:50 AM »

Sounds good Bill. I know you've been anxious to get the bike repairs done so you could do some testing. The Galot race is approaching fast for us. Take care of the hand.

Sam Green Racing · « **Reply #792 on:** July 02, 2017, 03:59:34 PM »

Great news Billy, good luck with getting it ready but don't over do it Bro.

Bill/BentON Racing · « **Reply #793 on:** July 09, 2017, 11:06:00 AM »

Why we do it, OK all the oil was leaking outta tank, lol, nice spring!

Bill/BentON Racing · « **Reply #794 on:** July 09, 2017, 12:51:18 PM »

All polished, 1500, 3000 and 5000. All reassembled and we going be ready....lol.

kmb69 · « **Reply #795 on:** July 09, 2017, 12:51:27 PM »

Quote from: Bill/BentON Racing on July 09, 2017, 11:06:00 AM

Why we do it, OK all the oil was leaking outta tank, lol, nice spring!

How did that happen? I've seen weak springs but have never seen broken ones before.

dragracer · « **Reply #796 on:** July 09, 2017, 02:00:44 PM »

Need to do the same thing one day.

Bill/BentON Racing · « **Reply #797 on:** July 09, 2017, 03:12:21 PM »

Quote from: kmb69 on July 09, 2017, 12:51:27 PM

Quote from: Bill/BentON Racing on July 09, 2017, 11:06:00 AM
Why we do it, OK all the oil was leaking outta tank, lol, nice spring!

How did that happen? I've seen weak springs but have never seen broken ones before.

Power man, lol

Medyo Bastos · « **Reply #798 on:** July 09, 2017, 03:34:17 PM »

you keeping that spring in there?

Bill/BentON Racing · « **Reply #799 on:** July 09, 2017, 06:53:24 PM »

Why sure, just had to line up the ends! LMAO

News:

Author Topic: Cobra motor disassembly and rebuild (Read 109785 times)