Author Topic: 350F exhaust options/opinions  (Read 835 times)

0 Members and 1 Guest are viewing this topic.

Offline The Mayor

  • My Gallery
  • Enthusiast
  • **
  • Posts: 108
350F exhaust options/opinions
« on: July 18, 2017, 08:52:01 AM »
Hi all,

I'm resurrecting my old custom CB350F build... probably about 4 years or more since I started. Seems like there used to be very few options out there besides the Mac 4-1 for the 350F, but I've seen quite a few more out there since I started looking again. I was hoping some other 350F/400F owners might have some updated input on the subject? I'm running rear sets instead of the stock pegs, so if I remember correctly, 400F systems should fit as well?

I seen mention of Carpy, Delkevic, MotoGP Werks... any others? How would you rank them in terms of quality/fit/etc.? Also, if there are good 4-2 options I'm all ears as well. Thanks for any input!

Offline flybox1

  • My wife thinks I'm a
  • Really Old Timer ...
  • *******
  • Posts: 14,289
'78 750K (F3 engine) PD42b's, Modified airbox w/K&N  filter, 40/110 jets, 1 needle shim, IMS@ 1 turn out. Kerker + Cone 18" QuietCore

Past Bikes
1974 550K0 (stock), 1973 CB350F (stock), 1983 Yamaha XS400K (POS)
77/78 cool 2 member #3
"Knowledge without mileage equals bullsh!t" - Henry Rollins

"This is my CB. There are many like it, but this one is mine…"

Offline The Mayor

  • My Gallery
  • Enthusiast
  • **
  • Posts: 108
Re: 350F exhaust options/opinions
« Reply #2 on: July 18, 2017, 12:11:46 PM »
Thanks - yeah the bike cost half of what they're asking for the new-old-stock pipes ;)
It's a stripped down, minimal bike - so the cleaner the better. I was leaning towards the Delkevic straight (http://www.ebay.com/itm/Delkevic-4into1-Stainless-Steel-Exhaust-Straight-Muffler-Honda-CB350F-72-74-/172558147065?hash=item282d445df9:g:e~kAAOSwSlBYuGZz&vxp=mtr) or Carpy's shorty silver ceramic.

Anything else out there to consider?

Offline flybox1

  • My wife thinks I'm a
  • Really Old Timer ...
  • *******
  • Posts: 14,289
Re: 350F exhaust options/opinions
« Reply #3 on: July 18, 2017, 12:14:19 PM »
Heard nothing but good things about the Delkevic products from the 750 guys....
'78 750K (F3 engine) PD42b's, Modified airbox w/K&N  filter, 40/110 jets, 1 needle shim, IMS@ 1 turn out. Kerker + Cone 18" QuietCore

Past Bikes
1974 550K0 (stock), 1973 CB350F (stock), 1983 Yamaha XS400K (POS)
77/78 cool 2 member #3
"Knowledge without mileage equals bullsh!t" - Henry Rollins

"This is my CB. There are many like it, but this one is mine…"