« previous next »
Pages: [1]   Go Down

Author Topic: Little yellow F'er....400F resto (77)  (Read 1703 times)

0 Members and 1 Guest are viewing this topic.

Offline b1jackson

  • Hot Shot
  • ***
  • Posts: 448
Little yellow F'er....400F resto (77)
« on: July 14, 2018, 04:42:41 AM »
Hey all.  Thought it best to document this here as I'll no doubt have a few questions along the way.  No stranger to the inline 4's but this will be my first frame strip restoration. 

Going to make a clean runner out of it and stay stock or very close to it.  77 400F.  Wasn't running when I got it of course (what fun is that?😂) but with a carb rebuild it fired right up.

So it's currently stripped to the bare frame with the engine out and in a stand awaiting cleaning and paint.

Here is the on-the-way home pic. 


Logged

Offline Don R

  • My Sandcast is a
  • Really Old Timer ...
  • *******
  • Posts: 19,887
  • Saver of unloved motorcycles.
Re: Little yellow F'er....400F resto (77)
« Reply #1 on: July 14, 2018, 02:13:02 PM »
  That's a sweet find. They are a blast to ride. I don't think DSS has the parts they used to but still sell a lot of 400 stuff. I've owned 3 and haven't gotten a good right control yet.
Logged
No matter how many times you paint over a shadow, it's still there.
 CEO at the no kill motorcycle shop.
 You don't need a weatherman to know which way the wind blows.

Offline b1jackson

  • Hot Shot
  • ***
  • Posts: 448
Re: Little yellow F'er....400F resto (77)
« Reply #2 on: July 14, 2018, 04:33:23 PM »
I did have to rebuild this one or at least buy the inner white plastic piece for a future rebuild of the switch.

I'm curious if this was a fix for a cam chain adjuster issue or?

Logged

Offline MauiK3

  • A K3 is saved
  • Old Timer
  • ******
  • Posts: 4,273
  • Old guy
Re: Little yellow F'er....400F resto (77)
« Reply #3 on: July 15, 2018, 10:23:04 AM »
It looks like someone changed the upper bolt. Would be worth taking it apart to inspect.
Logged
1973 CB 750 K3
10/72 build Z1 Kawasaki

Offline jakec

  • Master
  • *****
  • Posts: 2,075
Re: Little yellow F'er....400F resto (77)
« Reply #4 on: July 16, 2018, 10:09:19 AM »
Nice bike.
Logged
1970 CB750 K0
1977 CB750 Chop
1997 XR650L

Offline b1jackson

  • Hot Shot
  • ***
  • Posts: 448
Re: Little yellow F'er....400F resto (77)
« Reply #5 on: July 21, 2018, 03:16:06 AM »
Quote from: MauiK3 on July 15, 2018, 10:23:04 AM
It looks like someone changed the upper bolt. Would be worth taking it apart to inspect.

I tried to turn the bolt but it's stuck.  I fear snapping it off or cracking the case.  Not really worth it in my opinion.
Logged

Offline MRieck

  • Really Old Timer ...
  • *******
  • Posts: 10,561
  • Big ideas....
Re: Little yellow F'er....400F resto (77)
« Reply #6 on: July 21, 2018, 06:41:57 AM »
Looks like epoxy on that upper bolt/nut
Logged
Owner of the "Million Dollar CB"

Offline b1jackson

  • Hot Shot
  • ***
  • Posts: 448
Re: Little yellow F'er....400F resto (77)
« Reply #7 on: July 21, 2018, 04:25:09 PM »
Quote from: MRieck on July 21, 2018, 06:41:57 AM
Looks like epoxy on that upper bolt/nut

Just silicon
Logged

Offline marting100

  • Full Member
  • *
  • Posts: 95
Re: Little yellow F'er....400F resto (77)
« Reply #8 on: July 24, 2018, 05:40:45 AM »
Hi b1!
nice find! (I have the same ;-).....yes that bolt is a cam adj. fix (also did the same on mine ;-)...if you are going open the case and re-do the motor, I suggest taking it out (reversed drill bit/easy out and liquid wrench) what ever it takes, just take your time and care and you will be fine.
I will follow your built.
Cheers!
M
Logged

Offline b1jackson

  • Hot Shot
  • ***
  • Posts: 448
Re: Little yellow F'er....400F resto (77)
« Reply #9 on: July 28, 2018, 01:12:14 AM »
Nope.  Won't be splitting the case so the bolt can stay where it is!
Logged

Offline marting100

  • Full Member
  • *
  • Posts: 95
Re: Little yellow F'er....400F resto (77)
« Reply #10 on: July 30, 2018, 06:31:02 AM »
Hi B1!
...yes it can stay where is it BUT make sure the cam chain adj. works well with it otherwise you will have to split it open later, not fun :(
Cheers!
M
Logged

Offline b1jackson

  • Hot Shot
  • ***
  • Posts: 448
Re: Little yellow F'er....400F resto (77)
« Reply #11 on: August 04, 2018, 12:54:06 PM »
Frame painting time!  That's a 77 and 75 frame.  Blasted and primed ready for paint.

Logged

Offline Don R

  • My Sandcast is a
  • Really Old Timer ...
  • *******
  • Posts: 19,887
  • Saver of unloved motorcycles.
Re: Little yellow F'er....400F resto (77)
« Reply #12 on: August 10, 2018, 04:17:06 PM »
 I always used Dupont Imron blitz black and when it's still wet I used some reducer with what was left in the bottom feed cup and shot the frame with that. The reducer melts in the overspray and it looks like powder coat. Probably more gloss than stock though.
Logged
No matter how many times you paint over a shadow, it's still there.
 CEO at the no kill motorcycle shop.
 You don't need a weatherman to know which way the wind blows.

Offline 1952paul0

  • Full Member
  • *
  • Posts: 9
Re: Little yellow F'er....400F resto (77)
« Reply #13 on: August 12, 2018, 04:48:02 AM »
common fault usually due to over zealous spanering. You may as well address the problem now, there a pretty easy strip down your going to need to adjust that cam chain at some stage.

atb.,

Paul
Logged
Pages: [1]   Go Up
« previous next »