Topic: Front Turn Signal Stems CB750 K1

[Rookster]

What length are the original front turn signal stems on the K1?  The ones on my K1 are aftermarket and I think they are too long.  I picked up a set of early turn signals and they had these stems on them.  They are about 60mm which is about 10mm shorter than the stems on my K1.  Can anyone measure an original stem and provide the correct length?


Thanks
Scott

[Kevnz]

According to the respective parts manuals, the same part is used by 750 K1, K2 and CB500. I just measured my 500 ones and they measure the same as your one.

[Kevin D]

Here’s a photo from an original K1 part (11/70 build) but the photo has an optical delusion…..
Your part looks correct, as my NZ namesake has noted. 
About 2” from bottom of hex to center of pinch bolt.
My original part is a little bit rusty.

[Rookster]

Thanks guys.  Looks like I will be switching out the stems for these correct ones.

Scott