« previous next »
Pages: [1]   Go Down

Author Topic: Wiseco 811 kit.  (Read 527 times)

0 Members and 1 Guest are viewing this topic.

Offline Don R

  • My Sandcast is a
  • Really Old Timer ...
  • *******
  • Posts: 19,648
  • Saver of unloved motorcycles.
Wiseco 811 kit.
« on: May 28, 2023, 09:50:22 am »
 I see CycleX brought back the Wiseco 811 kit, a couple months ago I told Ken I had something he doesn't, I have a new old stock Wiseco 811 kit from 1977 new in the box. He fixed that lol.
  For those guys that think the 836 leaves the bottom of the sleeve too thin.
Logged
No matter how many times you paint over a shadow, it's still there.
 CEO at the no kill motorcycle shop.
 You don't need a weatherman to know which way the wind blows.

Offline PeWe

  • Really Old Timer ...
  • *******
  • Posts: 15,452
  • Bike almost back to the 70's 2015
Re: Wiseco 811 kit.
« Reply #1 on: May 28, 2023, 11:22:30 am »
Complete kit with cylinder too ;)
http://www.cyclexchange.net/Honda%20Page.htm
Lots of goodies on that page!

I never thought my 836 sleeves were too thin so I let cylinder to be bored further when worn.
CycleX old style 65.5mm pistons ;)
On the shelf, for future use.
Logged
CB750 K6-76  970cc (Earlier 1005cc JMR Billet block on the shelf waiting for a comeback)
CB750 K2-75 Parts assembled to a stock K2

Updates of the CB750 K6 -1976
http://forums.sohc4.net/index.php/topic,180468.msg2092136.html#msg2092136
The billet block build thread
http://forums.sohc4.net/index.php/topic,49438.msg1863571.html#msg1863571
CB750 K2 -1975  build thread
http://forums.sohc4.net/index.php/topic,168243.msg1948381.html#msg1948381
K2 engine build thread. For a complete CB750 -75
http://forums.sohc4.net/index.php/topic,180088.msg2088008.html#msg2088008
Carb jetting, a long story Mikuni TMR32
http://forums.sohc4.net/index.php/topic,179479.msg2104967.html#msg2104967

Offline Jerry Rxman Griffin aka MuthaF'er

  • This MuthaF'er is getting to be a
  • Really Old Timer ...
  • *******
  • Posts: 14,890
  • Bought her new 4/75
Re: Wiseco 811 kit.
« Reply #2 on: May 28, 2023, 12:05:59 pm »
When I first went with my 812 Yoshi kit I did so thinking I'd have enough meat left to go up to 836 should I need.

I have three unknown NOS 810/811/812 pistons sitting in my cave should anyone have any interest
Logged
As of today 3/13/2012 my original owner 75 CB750F has made it through 3 wives, er EX-wives. Free at last.  ;-)

Offline Don R

  • My Sandcast is a
  • Really Old Timer ...
  • *******
  • Posts: 19,648
  • Saver of unloved motorcycles.
Re: Wiseco 811 kit.
« Reply #3 on: May 30, 2023, 10:35:07 am »
 I found three 823cc  pistons with the turbo stuff I bought.
Logged
No matter how many times you paint over a shadow, it's still there.
 CEO at the no kill motorcycle shop.
 You don't need a weatherman to know which way the wind blows.

Offline willbird

  • Expert
  • ****
  • Posts: 897
Re: Wiseco 811 kit.
« Reply #4 on: May 31, 2023, 02:38:47 pm »
Quote from: PeWe on May 28, 2023, 11:22:30 am
Complete kit with cylinder too ;)
http://www.cyclexchange.net/Honda%20Page.htm
Lots of goodies on that page!

I never thought my 836 sleeves were too thin so I let cylinder to be bored further when worn.
CycleX old style 65.5mm pistons ;)
On the shelf, for future use.

Yea all a man has to do is live on Ramen noodles and use the same Tea bag for a month straight and he can save the $$ to buy one LOL.

Bill
Logged
Pages: [1]   Go Up
« previous next »