Author Topic: Issue with idle when engine hot on CB350F  (Read 419 times)

0 Members and 2 Guests are viewing this topic.

Offline Regor

  • Full Member
  • *
  • Posts: 4
Issue with idle when engine hot on CB350F
« on: July 26, 2023, 12:06:07 PM »
I recently acquired a 1973 CB350F and have a problem with the idle.  The bike starts and runs well, however, after it warms up the idle drops way low and it often dies at stop signs.  What are some things to check on which may remedy this problem.

Offline HondaMan

  • Someone took this pic of me before I became a
  • Really Old Timer ...
  • *******
  • Posts: 13,925
  • ...not my choice, I was nicknamed...
    • Getting 'em Back on the Road
Re: Issue with idle when engine hot on CB350F
« Reply #1 on: July 26, 2023, 05:10:56 PM »
Start with checking the sparkplugs: see if one or more might be fouled.
Check the valve lash (clearance) on all 8 valves.
Check the ignition timing. If the points gap has closed down somewhat from points wear then the timing will be slow. Then it will act much like you describe.
See SOHC4shop@gmail.com for info about the gadgets I make for these bikes.

The demons are repulsed when a man does good. Use that.
Blood is thicker than water, but motor oil is thicker yet...so, don't mess with my SOHC4, or I might have to hurt you.
Hondaman's creed: "Bikers are family. Treat them accordingly."

Link to Hondaman Ignition: http://forums.sohc4.net/index.php?topic=67543.0

Link to My CB750 Book: https://www.lulu.com/search?adult_audience_rating=00&page=1&pageSize=10&q=my+cb750+book

Link to website: www.SOHC4shop.com

Offline Deltarider

  • Really Old Timer ...
  • *******
  • Posts: 8,140
  • ... but some animals are more equal than others.
Re: Issue with idle when engine hot on CB350F
« Reply #2 on: July 27, 2023, 06:40:33 AM »
Check the ignition timing. If the points gap has closed down somewhat from points wear then the timing will be slow. Then it will act much like you describe.
For some reason I have seen this on quite some CB350Fs. Check the cam is (lightly) lubed. Is that little felt still there?
CB500K2-ED Excel black
"There is enough for everyone's need but not enough for anybody's greed."