« previous next »
Pages: [1]   Go Down

Author Topic: Advancer Shaft Available!  (Read 676 times)

0 Members and 1 Guest are viewing this topic.

Offline BenelliSEI

  • Really Old Timer ...
  • *******
  • Posts: 9,869
  • 1969 cb750
Advancer Shaft Available!
« on: November 22, 2023, 06:09:14 PM »
Another new product I had not seen before!
Logged

Online kerryb

  • Not a very
  • Expert
  • ****
  • Posts: 1,142
  • 78 750k 74 cb550k, '83GL1100 FXSTC, 1979 Wilmac
Re: Advancer Shaft Available!
« Reply #1 on: November 22, 2023, 06:21:40 PM »
Thank you, it's nice to know that is available.
Logged
intrigued by the wail...seduced by the scream.

Offline HondaMan

  • Someone took this pic of me before I became a
  • Really Old Timer ...
  • *******
  • Posts: 13,802
  • ...not my choice, I was nicknamed...
    • Getting 'em Back on the Road
Re: Advancer Shaft Available!
« Reply #2 on: November 23, 2023, 01:50:25 PM »
If you get one, check closely the O-ring on it. Mine leaked as the O-ring was both too thin in section and not big enough OD. Honda sells that O-ring for $6 (or did), and then it works.
Logged
See SOHC4shop@gmail.com for info about the gadgets I make for these bikes.

The demons are repulsed when a man does good. Use that.
Blood is thicker than water, but motor oil is thicker yet...so, don't mess with my SOHC4, or I might have to hurt you.
Hondaman's creed: "Bikers are family. Treat them accordingly."

Link to Hondaman Ignition: http://forums.sohc4.net/index.php?topic=67543.0

Link to My CB750 Book: https://www.lulu.com/search?adult_audience_rating=00&page=1&pageSize=10&q=my+cb750+book

Link to website: www.SOHC4shop.com

Offline flybackwards

  • Enthusiast
  • **
  • Posts: 160
Re: Advancer Shaft Available!
« Reply #3 on: November 23, 2023, 03:06:47 PM »
Also available at Old School Parts - I now have two...just in case.
Logged

Offline PeWe

  • Really Old Timer ...
  • *******
  • Posts: 15,545
  • Bike almost back to the 70's 2015
Re: Advancer Shaft Available!
« Reply #4 on: December 02, 2023, 09:48:06 PM »
I ordered from Yamiya years ago.
https://www.yamiya750.com/index.php?main_page=product_info&cPath=246_21_250_55&products_id=2877

I know I bought 2, used one without leak. The 2nd one must have entered the garage black hole.
Logged
CB750 K6-76  970cc (Earlier 1005cc JMR Billet block on the shelf waiting for a comeback)
CB750 K2-75 Parts assembled to a stock K2

Updates of the CB750 K6 -1976
http://forums.sohc4.net/index.php/topic,180468.msg2092136.html#msg2092136
The billet block build thread
http://forums.sohc4.net/index.php/topic,49438.msg1863571.html#msg1863571
CB750 K2 -1975  build thread
http://forums.sohc4.net/index.php/topic,168243.msg1948381.html#msg1948381
K2 engine build thread. For a complete CB750 -75
http://forums.sohc4.net/index.php/topic,180088.msg2088008.html#msg2088008
Carb jetting, a long story Mikuni TMR32
http://forums.sohc4.net/index.php/topic,179479.msg2104967.html#msg2104967

Offline MauiK3

  • A K3 is saved
  • Old Timer
  • ******
  • Posts: 4,263
  • Old guy
Re: Advancer Shaft Available!
« Reply #5 on: December 03, 2023, 06:58:33 AM »
My garage is not very big and most of my storage for woodwork, bike work and other hobbies is carefully placed in it. I still loose things, or at least can't quite remember where they are. I "reorganize" every so often, like most folks. It's gotten better lately but I still have to search once in a while.
Logged
1973 CB 750 K3
10/72 build Z1 Kawasaki

Offline HondaMan

  • Someone took this pic of me before I became a
  • Really Old Timer ...
  • *******
  • Posts: 13,802
  • ...not my choice, I was nicknamed...
    • Getting 'em Back on the Road
Re: Advancer Shaft Available!
« Reply #6 on: December 03, 2023, 11:58:46 AM »
Quote from: MauiK3 on December 03, 2023, 06:58:33 AM
I "reorganize" every so often....
Boy, after this year I sure need to do that...
Logged
See SOHC4shop@gmail.com for info about the gadgets I make for these bikes.

The demons are repulsed when a man does good. Use that.
Blood is thicker than water, but motor oil is thicker yet...so, don't mess with my SOHC4, or I might have to hurt you.
Hondaman's creed: "Bikers are family. Treat them accordingly."

Link to Hondaman Ignition: http://forums.sohc4.net/index.php?topic=67543.0

Link to My CB750 Book: https://www.lulu.com/search?adult_audience_rating=00&page=1&pageSize=10&q=my+cb750+book

Link to website: www.SOHC4shop.com

Offline hawaiikid

  • 1975cb400f
  • Full Member
  • *
  • Posts: 62
Re: Advancer Shaft Available!
« Reply #7 on: December 05, 2023, 12:15:34 AM »
Hondaman, I volunteer to come over and help you organize. No telling what treasures you have buried in there.
Logged

Offline PeWe

  • Really Old Timer ...
  • *******
  • Posts: 15,545
  • Bike almost back to the 70's 2015
Re: Advancer Shaft Available!
« Reply #8 on: December 05, 2023, 06:58:40 AM »
Quote from: BenelliSEI on November 22, 2023, 06:09:14 PM
Another new product I had not seen before!
You are lucky to live not far away from all those parts for ok money! ;)
Logged
CB750 K6-76  970cc (Earlier 1005cc JMR Billet block on the shelf waiting for a comeback)
CB750 K2-75 Parts assembled to a stock K2

Updates of the CB750 K6 -1976
http://forums.sohc4.net/index.php/topic,180468.msg2092136.html#msg2092136
The billet block build thread
http://forums.sohc4.net/index.php/topic,49438.msg1863571.html#msg1863571
CB750 K2 -1975  build thread
http://forums.sohc4.net/index.php/topic,168243.msg1948381.html#msg1948381
K2 engine build thread. For a complete CB750 -75
http://forums.sohc4.net/index.php/topic,180088.msg2088008.html#msg2088008
Carb jetting, a long story Mikuni TMR32
http://forums.sohc4.net/index.php/topic,179479.msg2104967.html#msg2104967

Offline MauiK3

  • A K3 is saved
  • Old Timer
  • ******
  • Posts: 4,263
  • Old guy
Re: Advancer Shaft Available!
« Reply #9 on: December 05, 2023, 07:14:32 AM »
Seems like it would be worth flying there to help, it would be an SOHC Disneyland journey!!
Logged
1973 CB 750 K3
10/72 build Z1 Kawasaki

Offline Stev-o

  • Ain't no
  • Really Old Timer ...
  • *******
  • Posts: 34,281
  • Central Texas
Re: Advancer Shaft Available!
« Reply #10 on: December 05, 2023, 08:16:35 AM »
Quote from: MauiK3 on December 05, 2023, 07:14:32 AM
Seems like it would be worth flying there to help, it would be an SOHC Disneyland journey!!

The Hawaii guys might get "freeze-shock" if they travel to CO this winter!  Lows in Denver this weekend are expected to be 20.
Logged
'74 "Big Bang" Honda 750K [836].....'76 Honda 550F.....K3 Park Racer!......and a Bomber!............plus plus plus.........

Offline PeWe

  • Really Old Timer ...
  • *******
  • Posts: 15,545
  • Bike almost back to the 70's 2015
Re: Advancer Shaft Available!
« Reply #11 on: December 05, 2023, 08:30:46 PM »
Quote from: Stev-o on December 05, 2023, 08:16:35 AM
Quote from: MauiK3 on December 05, 2023, 07:14:32 AM
Seems like it would be worth flying there to help, it would be an SOHC Disneyland journey!!

The Hawaii guys might get "freeze-shock" if they travel to CO this winter!  Lows in Denver this weekend are expected to be 20.
My thermometer show -20.4C outside house.
I'll soon take my bicycle to my job! Only a 20 minutes ride ... ;D
Logged
CB750 K6-76  970cc (Earlier 1005cc JMR Billet block on the shelf waiting for a comeback)
CB750 K2-75 Parts assembled to a stock K2

Updates of the CB750 K6 -1976
http://forums.sohc4.net/index.php/topic,180468.msg2092136.html#msg2092136
The billet block build thread
http://forums.sohc4.net/index.php/topic,49438.msg1863571.html#msg1863571
CB750 K2 -1975  build thread
http://forums.sohc4.net/index.php/topic,168243.msg1948381.html#msg1948381
K2 engine build thread. For a complete CB750 -75
http://forums.sohc4.net/index.php/topic,180088.msg2088008.html#msg2088008
Carb jetting, a long story Mikuni TMR32
http://forums.sohc4.net/index.php/topic,179479.msg2104967.html#msg2104967
Pages: [1]   Go Up
« previous next »