« previous next »
Pages: 1 [2]  All   Go Down

Author Topic: 73 racer build  (Read 7976 times)

0 Members and 1 Guest are viewing this topic.

Offline Moosey

  • Full Member
  • *
  • Posts: 87
Re: 73 racer build
« Reply #25 on: October 17, 2014, 01:52:49 PM »
I have a 71 cb500 and am looking into getting comstars. I see you got yours off a 750a. Was a direct bolt in or did you have to change sproket, axle, spacer on the rear? I think I will have to use fork off of a costar bike for front (plan to keep older forks). Any input will be greatly appreciatd!!
Logged

Offline Cougars750F0

  • Hot Shot
  • ***
  • Posts: 314
Re: 73 racer build
« Reply #26 on: October 17, 2014, 02:28:19 PM »
Quote from: Moosey on October 17, 2014, 01:52:49 PM
I have a 71 cb500 and am looking into getting comstars. I see you got yours off a 750a. Was a direct bolt in or did you have to change sproket, axle, spacer on the rear? I think I will have to use fork off of a costar bike for front (plan to keep older forks). Any input will be greatly appreciatd!!
Post to the Bikes & Parts wanted a lot of people prefer spokes on these old bikes if your spokes wheels are in good shape you may be able to trade. Here's the linkhttp://forums.sohc4.net/index.php?board=45.0
Logged
1970 Honda / Yoshimura 810 with ported head, 1968  Honda CB450 5 speed European model, 1973  Triumph Bonneville 750 twin carburetor model, 1975 Honda 750F0 Super Sport, 1977 Honda 750A

Offline Jhelgesen

  • Full Member
  • *
  • Posts: 23
    • Stahlwerks
Re: 73 racer build
« Reply #27 on: October 17, 2014, 04:13:33 PM »
The rear wheel was a bolt on with the 550 axle. Going to try fitting a disc brake wheel next, so we'll see if that fits.  I had to use the narrow sprocket carrier from a 750.  I'll need a new spacer on the right side if I don't use the disc brake.

Don't know about the front axle since I have the cbr front end. I did find a yamaha front axle that is the right diameter and may save me some machining.
Logged

Offline Lostboy Steve

  • Old Timer
  • ******
  • Posts: 3,096
Re: 73 racer build
« Reply #28 on: October 17, 2014, 06:34:27 PM »
That looks really sweet. So are you now going to have those adapters machined from aluminum?
Logged
1968 Honda Z50
1977 Honda CB550K
2018 Indian Scout

Offline Jhelgesen

  • Full Member
  • *
  • Posts: 23
    • Stahlwerks
Re: 73 racer build
« Reply #29 on: October 30, 2014, 07:07:26 AM »
Swapped the rear wheel to a 18"  750 sport disc brake wheel (instead of the 17" 750a drum brake wheel)  Lost 10mm in tire width, but I'll live. :D

Using a rear caliper from a 750 sport, and a GL1000 disc (same part number as 750).  I will need to narrow the caliper mount block to space the wheel correctly, take several mm off to center the wheel.



Front disc brake adapters arrived, fit perfect.  Need to make axle spacers now.  Found a yamaha front axle that was 15mm diameter, and longer than the CB, so I'll update my CAD for that one instead of making an axle from scratch.





Had to move the bike off the table for a bit while I work on another project, she has a pretty good stance.


Logged

Offline SOHC4 Cafe Racer Fan

  • Speak up, Whipper-Snapper! I'm a
  • Really Old Timer ...
  • *******
  • Posts: 15,731
  • SOHC/4 Member #1235
Re: 73 racer build
« Reply #30 on: October 30, 2014, 05:14:14 PM »
The stance and the tank look good. 
Logged
1975 CB550K1 "Blue" Stockish Restomod (http://forums.sohc4.net/index.php?topic=135005.0)
1975 CB550F1 frame/CB650 engine hybrid "The Hot Mess" (http://forums.sohc4.net/index.php/topic,150220.0.html)
2008 Triumph Thruxton (http://forums.sohc4.net/index.php/topic,190956.0.html)
2014 MV Agusta Brutale Dragster 800
2015 Yamaha FZ-09 (http://forums.sohc4.net/index.php/topic,186861.0.html)

"There are some things nobody needs in this world, and a bright-red, hunch-back, warp-speed 900cc cafe racer is one of them — but I want one anyway, and on some days I actually believe I need one.... Being shot out of a cannon will always be better than being squeezed out of a tube. That is why God made fast motorcycles, Bubba." Hunter S. Thompson, Song of the Sausage Creature, Cycle World, March 1995.  (http://www.latexnet.org/~csmith/sausage.html and https://magazine.cycleworld.com/article/1995/3/1/song-of-the-sausage-creature)

Sold/Emeritus
1973 CB750K2 "Bionic Mongrel" (http://forums.sohc4.net/index.php?topic=132734.0) - Sold
1977 CB750K7 "Nine Lives" Restomod (http://forums.sohc4.net/index.php?topic=50490.0) - Sold
2005 RVT1000RR RC51-SP2 "El Diablo" - Sold
2016+ Triumph Thruxton 1200 R (http://forums.sohc4.net/index.php/topic,170198.0.html) - Sold

Offline Jhelgesen

  • Full Member
  • *
  • Posts: 23
    • Stahlwerks
Re: 73 racer build
« Reply #31 on: November 25, 2014, 09:32:09 AM »
Finished the front axle spacers after some slight tweaking on the lathe.





Now moving to the back.

Ended up fitting a 750 sport rear arm on the bike, perfect fit on the 550, bolted right on.  Only issue is the wheel is a few mm off to the left, need to figure out how to space back right.

A big thank you to my lovely wife who surprised me with with a new drilled EBC rear rotor for the bike, so much nicer than the stock disc.



Logged

Offline Jhelgesen

  • Full Member
  • *
  • Posts: 23
    • Stahlwerks
Re: 73 racer build
« Reply #32 on: December 28, 2014, 04:04:20 PM »
Wasn't happy with the raised front of the cx500 tank, so I formed some skirts to reshape the lower section, and installed the cap assembly.

Before



After




Logged

Offline Bankerdanny

  • Eventually I will be old enough in reality to be
  • Really Old Timer ...
  • *******
  • Posts: 7,626
  • Endeavor to persevere
Re: 73 racer build
« Reply #33 on: December 29, 2014, 02:13:15 PM »
So they are purely cosmetic skirts, they didn't actually change the volume of the tank?
Logged
"The problem with quotes on the Internet is that you never know if they're true" - Abraham Lincoln

Current: '76 CB750F. Previous:  '75 CB550F, 2007 Yamaha Vino 125 Scooter, '75 Harley FXE Superglide, '77 GL1000, '77 CB550k, '68 Suzuki K10 80, '68 Yamaha YR2, '69 BMW R69S, '71 Honda SL175, '02 Royal Enfield Bullet 500, '89 Yamaha FJ1200

Offline Jhelgesen

  • Full Member
  • *
  • Posts: 23
    • Stahlwerks
Re: 73 racer build
« Reply #34 on: December 29, 2014, 05:03:37 PM »
They are just cosmetic, but they greatly increase the space under the tank to hide wires, electronics, a tool kit, and maybe a few days worth of provisions.
Logged

Offline greenjeans

  • Industrial strengthed dreamer.
  • Old Timer
  • ******
  • Posts: 2,962
  • 1972 CB750K2
Re: 73 racer build
« Reply #35 on: December 29, 2014, 05:16:04 PM »
Really like what you did with that tank.  Great solution.  can't wait to see this one back on the road.
Logged
Yep, I'm the kid that figured out how to put things back together...eventually.
Pages: 1 [2]  All   Go Up
« previous next »