Hi all,
I've done a search and checked the FAQ, but I wasn't able to find what I was after...
I'm in the process of re-building my 550F, and am on the straightforward step of re-connecting the wiring harness to all the switches/lights/engine/etc. After trying to use the 500 wiring diagram, and being incredibly confused at some of the connection types and lack of dash lights etc., I looked around again and found a 550 wiring diagram. This has made much of the task easier
.
However, I'm wondering if anyone can point me in the direction of either diagrams or pictures which show the routing of the cables in the front end/headstock of the bike. I've swapped the 'antler' cruiser type bars that were on it for those from a 400F, and I think because the wires had to be longer than stock for the ram horns, and the 400F bars are like drag bars, there is a lot of extra length in the wires and cables. Before I start considering shortening parts of the wiring looms, I'd like to make sure that I have enough for everything to work properly.
Thanks,
-- Pirate.
