Author Topic: my 76 cb750 bobber one last try (Read 10556 times)

tattdadd · « **on:** July 29, 2009, 02:51:01 pm »

I bought this bike pretty much all stock and this is what I created.

Zaipai · « **Reply #1 on:** July 29, 2009, 02:53:24 pm »

Wow what a nice bobber. I normally don't like bobbers that much but this one is one I would like to own.. Nice work. Does she run/ride as good as she looks? Good job!

tattdadd · « **Reply #2 on:** July 29, 2009, 02:57:29 pm »

It rides nice, and with a lot of tinkering and frustration dialing in the carbs it's finally running good. I'm very happy with the way it turned out, especially for a cheap bike.

Zaipai · « **Reply #3 on:** July 29, 2009, 02:58:52 pm »

Quote from: tattdadd on July 29, 2009, 02:57:29 pm

It rides nice, and with a lot of tinkering and frustration dialing in the carbs it's finally running good. I'm very happy with the way it turned out, especially for a cheap bike.

As well you should, lets see if we can get it as the bike of the month for Sept.

tattdadd · « **Reply #4 on:** July 29, 2009, 03:11:52 pm »

Here are a couple of more pics.

luder · « **Reply #5 on:** July 29, 2009, 03:18:44 pm »

Thats way cool-nice job...luder

tosc · « **Reply #6 on:** July 31, 2009, 11:04:44 am »

thats beautiful! where do you live? hopefully MI so you can help me get my bike looking like that! lol

valt · « **Reply #7 on:** July 31, 2009, 01:43:55 pm »

Can you get a rear and front shot? I think 750s with hardtails look hilarious* from the rear just because the motor sticks out so much.

*Hilarious in a awesome way.

tattdadd · « **Reply #8 on:** July 31, 2009, 02:24:37 pm »

Sorry, I live in Pa. If you have any questions feel free to ask. With a little mechanical ability it's really not that difficult, you just have to start and see what happens.

tattdadd · « **Reply #9 on:** July 31, 2009, 02:27:14 pm »

Here are a couple more pics from the beginning and the middle.

tattdadd · « **Reply #10 on:** July 31, 2009, 02:37:03 pm »

Here's one for Valt.

Zaipai · « **Reply #11 on:** July 31, 2009, 02:53:39 pm »

Very well done, keep the pics coming as you progress..

acteg · « **Reply #12 on:** August 03, 2009, 05:58:15 pm »

great work.

woodbutcher · « **Reply #13 on:** August 03, 2009, 07:51:58 pm »

Great job.....

Blueknight105 · « **Reply #14 on:** August 03, 2009, 09:06:44 pm »

Sweet looking bike!!! Im very envious...nice work!!!

bzr · « **Reply #15 on:** August 03, 2009, 09:28:00 pm »

That's so sexy it hurts.

Though it looked pretty sharp when it was stock...did you get good money selling the parts off at least?

zoo mob · « **Reply #16 on:** August 03, 2009, 09:37:42 pm »

Very nice looking custom, but I'd sure rather see a little bit more beat up bike used as a base. Nice work nonetheless.

Zaipai · « **Reply #17 on:** August 04, 2009, 05:20:37 am »

Just some ideas for later as you have the funds..

Replace the coil and wires for a Dyn with yellow wires..
Drilled front brake rotor..
Stainless Braided oil lines...
Shorter clutch cable...
Chrome cap for the brake reservoir...
Stainless braided gas lines...
Stainless braided front brake line....

Thats just off the top of my head.. Its a sharp bike, and there are so many tweaks you can do it should keep you busy and broke for the next few years.. :-)

750four · « **Reply #18 on:** August 04, 2009, 07:22:43 am »

Awesome job! You nailed it, hope mine looks as good as yours when I'm done building my frame. A couple of questions:

How much strech did you add in the rear?
Did you change the rake?
How far off of the ground is the frame?

tattdadd · « **Reply #19 on:** August 04, 2009, 10:48:32 am »

Thanks for the comments, it was fun to build! I stretched it four inches, there is no rake, and about 5 inches ground clearance.

greenjeans · « **Reply #20 on:** August 04, 2009, 02:59:25 pm »

Man, I dig it. good stance - just the right amount of stretch etc. I think you nailed it.

rustrocket92 · « **Reply #21 on:** December 13, 2009, 06:50:10 pm »

Love the bike ! What size oil tank is that?

sangyo soichiro · « **Reply #22 on:** December 14, 2009, 09:24:17 am »

Very nice looking bike! Love it!

Ricky_Racer · « **Reply #23 on:** December 14, 2009, 10:11:18 am »

Tattdad, is that a hardtail kit by Jeromy? Great lookin' scoot! RR

Toxic · « **Reply #24 on:** December 14, 2009, 12:50:00 pm »

Damn that is very nice.

Hate to see such a good looking stocker get cut up though but at least ya did her proud.

News:

Author Topic: my 76 cb750 bobber one last try (Read 10556 times)

tattdadd

tattdadd

tattdadd

tosc

tattdadd

tattdadd

tattdadd

tattdadd