Author Topic: Does This Have Too Many Cams AND Too Many Cylinders To Appreciate?  (Read 11558 times)

0 Members and 5 Guests are viewing this topic.

Offline kghost

  • Really Old Timer ...
  • *******
  • Posts: 6,855
  • www.facebook.com/RetroMecanicaAustralia
Re: Does This Have Too Many Cams AND Too Many Cylinders To Appreciate?
« Reply #50 on: August 19, 2009, 09:34:40 PM »
Thanks Bill...

Its hiss hiss all right.....jealously pure and simple  ;) ;D

Bikes getting there....
Stranger in a strange land

Offline bill440cars

  • Feeling More & More,
  • Really Old Timer ...
  • *******
  • Posts: 12,358
  • Tryin' To Slow Down "Time"!
Re: Does This Have Too Many Cams AND Too Many Cylinders To Appreciate?
« Reply #51 on: August 20, 2009, 07:03:27 AM »
Thanks Bill...

Its hiss hiss all right.....jealously pure and simple  ;) ;D

Bikes getting there....


         Tell you what, when I was just sitting here the other day, just thinking as I was reading a post concerning Gold Wings, it suddenly dawned on me that, kif you would have still had YOUR Wing and talking about selling it, I COULD HAVE gotten IT.  ::)

         It's like a fellow told me once:

                 "If IFS and BUTS were NUTS
 
                We'd have a MERRY CHRISTMAS!"   :D ;)

          Hopefully, I'll have something to report before too long, as far bike projects go. Starting with the Super Hawk.
Member # 1969
PRAYERS ALWAYS FOR: Bre, Jeff & Virginia, Bear, Trevor & Brianna ( Close Friend's Daughter)
"Because HE lives, I can Face Tomorrow"                  
 You CAN Teach An Old Dog New Tricks, Just Takes A Little Bit Longer & A Lot More Patience!! 
             
Main Rides: '02 Durango, '71 Swinger & Dad's '93
                  Dakota LE 4x4 '66 CB77 & '72 SL350K2
Watch What You Step Into, It Could  End Up A Mess!

Offline GoatBaSS

  • Could someone find an
  • Expert
  • ****
  • Posts: 760
  • To weird to live, to rare to die.
Re: Does This Have Too Many Cams AND Too Many Cylinders To Appreciate?
« Reply #52 on: August 20, 2009, 08:08:03 AM »
Bill you are on quite the tear it seems. How many? And please find the way to post the pics... Or I WILL come up there with a camera!!!
Leethal # 3046?
1972 CB750K/900CC Red Headed Dunstall, 1975CB750FSS Gone BNF: 1974CB500T, 1976CB750K X 2

Offline bill440cars

  • Feeling More & More,
  • Really Old Timer ...
  • *******
  • Posts: 12,358
  • Tryin' To Slow Down "Time"!
Re: Does This Have Too Many Cams AND Too Many Cylinders To Appreciate?
« Reply #53 on: August 20, 2009, 08:35:27 AM »
Bill you are on quite the tear it seems. How many? And please find the way to post the pics... Or I WILL come up there with a camera!!!

          Now, I HAVE posted photos of the GPZ, even though they were the ones from the ebay listing. ::) I Am working on getting to where I can do some photos pretty soon, I hope. Sure don't want you to have to come all the way UP HERE with that camera! :o ;D  I'm trying right now, to get some space in my Garage, so I can bring the CBX home and have a place INSIDE to keep it, when not riding it. :) I have GOT to park my trailer by the garage, go through the house, the attic and the garage and throw out a bunch of stuff, so I can rearrange things and better organize things so I can find what I want (or need) when I want (or need) it.     
Member # 1969
PRAYERS ALWAYS FOR: Bre, Jeff & Virginia, Bear, Trevor & Brianna ( Close Friend's Daughter)
"Because HE lives, I can Face Tomorrow"                  
 You CAN Teach An Old Dog New Tricks, Just Takes A Little Bit Longer & A Lot More Patience!! 
             
Main Rides: '02 Durango, '71 Swinger & Dad's '93
                  Dakota LE 4x4 '66 CB77 & '72 SL350K2
Watch What You Step Into, It Could  End Up A Mess!

Offline kghost

  • Really Old Timer ...
  • *******
  • Posts: 6,855
  • www.facebook.com/RetroMecanicaAustralia
Re: Does This Have Too Many Cams AND Too Many Cylinders To Appreciate?
« Reply #54 on: August 20, 2009, 08:59:19 AM »
Good luck with the clean up/out Bill.

That particular chore...throwing things out...has always been my least favorite.
Stranger in a strange land

Offline bill440cars

  • Feeling More & More,
  • Really Old Timer ...
  • *******
  • Posts: 12,358
  • Tryin' To Slow Down "Time"!
Re: Does This Have Too Many Cams AND Too Many Cylinders To Appreciate?
« Reply #55 on: August 20, 2009, 09:22:34 AM »
Good luck with the clean up/out Bill.

That particular chore...throwing things out...has always been my least favorite.

          Yeah, mine too! ::) I tend to be a "Pack Rat" of sorts and it doesn't help when you have more that ONE in a household! Even Brenda was, up to a point. My problem, on getting Started, is that when I look at it all, it is just so overwhelming! Plus, I have to be "Prepared" mentally, to do something like that. Overwise, I might as well forget it. If I'm ready, mentally, I can do good things and actually make some decent progress, otherwise, I don't even get ANY progress made at all! Kinda weird, but that's just me. ;D 
Member # 1969
PRAYERS ALWAYS FOR: Bre, Jeff & Virginia, Bear, Trevor & Brianna ( Close Friend's Daughter)
"Because HE lives, I can Face Tomorrow"                  
 You CAN Teach An Old Dog New Tricks, Just Takes A Little Bit Longer & A Lot More Patience!! 
             
Main Rides: '02 Durango, '71 Swinger & Dad's '93
                  Dakota LE 4x4 '66 CB77 & '72 SL350K2
Watch What You Step Into, It Could  End Up A Mess!

Offline kghost

  • Really Old Timer ...
  • *******
  • Posts: 6,855
  • www.facebook.com/RetroMecanicaAustralia
Re: Does This Have Too Many Cams AND Too Many Cylinders To Appreciate?
« Reply #56 on: August 20, 2009, 10:19:04 PM »
Start with ONE thing.
Stranger in a strange land

Offline bill440cars

  • Feeling More & More,
  • Really Old Timer ...
  • *******
  • Posts: 12,358
  • Tryin' To Slow Down "Time"!
Re: Does This Have Too Many Cams AND Too Many Cylinders To Appreciate?
« Reply #57 on: August 21, 2009, 04:14:58 AM »
Start with ONE thing.

             Tim, That sounds SO easy and I'VE done that before. Or at least I've tried to. Next thing I know, I see something else. Or I have to move something, during the course of what I started on, and I get off on something else. Then, I've lost my course. I WILL give it yet another shot though, because I HAVE to accomplish this. I have SO MANY responsibilities that i am going to HAVE TO cut down on those as well. It's all I can do to try to keep up with what I need to do for my Dad, my Daughter and myself. I'm going to try to get my bills cut back enough that I can seriously cut back on my responsibilities on my job!    This thread isn't really where this belongs and I really didn't intend to just roll this out, it just seemed to happen. I think that part of my problem is that I'm trying to continue on with ALL that Brenda and I BOTH weredoing. And it's just more than I can handle. I sometimes find myself trying to get something done and end up just sitting down and thoughts start going through my head. Right now, I need to get up and get on with things that I have to do now. 


                      You take care my friend and I'll get back with you,  Bill ;)
Member # 1969
PRAYERS ALWAYS FOR: Bre, Jeff & Virginia, Bear, Trevor & Brianna ( Close Friend's Daughter)
"Because HE lives, I can Face Tomorrow"                  
 You CAN Teach An Old Dog New Tricks, Just Takes A Little Bit Longer & A Lot More Patience!! 
             
Main Rides: '02 Durango, '71 Swinger & Dad's '93
                  Dakota LE 4x4 '66 CB77 & '72 SL350K2
Watch What You Step Into, It Could  End Up A Mess!

Offline kghost

  • Really Old Timer ...
  • *******
  • Posts: 6,855
  • www.facebook.com/RetroMecanicaAustralia
Re: Does This Have Too Many Cams AND Too Many Cylinders To Appreciate?
« Reply #58 on: August 21, 2009, 09:13:26 AM »
YOur on the right track Bill.

Worry about the fundamentals and the important things.

You can't do the work of 2 people.
Stranger in a strange land

Offline bill440cars

  • Feeling More & More,
  • Really Old Timer ...
  • *******
  • Posts: 12,358
  • Tryin' To Slow Down "Time"!
Re: Does This Have Too Many Cams AND Too Many Cylinders To Appreciate?
« Reply #59 on: August 21, 2009, 09:37:47 AM »
YOur on the right track Bill.

Worry about the fundamentals and the important things.

You can't do the work of 2 people.

                   Yeah, now, I just have to get a start going. Lots of times, if I can just nfind a place to start, I can make some pretty good progress.

                   I used to think I was busy, with lots to do. NOW, I've got MORE that I'm trying to do and Don't have my Partner to shoulder some of this. :(


                    Need to go for now, it's been a pretty hard day, for me so far and I'm working to get past this time, so I can get some things done
                     AND  keep my composure, you know?

                                                                                  Take care, Bill ;)                                                                                 
Member # 1969
PRAYERS ALWAYS FOR: Bre, Jeff & Virginia, Bear, Trevor & Brianna ( Close Friend's Daughter)
"Because HE lives, I can Face Tomorrow"                  
 You CAN Teach An Old Dog New Tricks, Just Takes A Little Bit Longer & A Lot More Patience!! 
             
Main Rides: '02 Durango, '71 Swinger & Dad's '93
                  Dakota LE 4x4 '66 CB77 & '72 SL350K2
Watch What You Step Into, It Could  End Up A Mess!

Offline kghost

  • Really Old Timer ...
  • *******
  • Posts: 6,855
  • www.facebook.com/RetroMecanicaAustralia
Re: Does This Have Too Many Cams AND Too Many Cylinders To Appreciate?
« Reply #60 on: August 21, 2009, 09:43:40 AM »
I know

Hang in there Bill
Stranger in a strange land