Author Topic: Project "Fried Rice"  (Read 3529 times)

0 Members and 1 Guest are viewing this topic.

Offline wrx84

  • Full Member
  • *
  • Posts: 10
Project "Fried Rice"
« on: September 09, 2009, 08:28:57 AM »
Hey everyone! I wanted to keep track of my project and decided that this is the place to do it! I purchased a 1974 cb750 in early August along with a spare bike and a cb450 for my brother. I started the tear down taking all the old 70's chopper style forks, seats, and sissy bars off. I wish I took pictures of it when i bought the bike as it looked like a total mess.

the bike stripped down


after the hardtail was welded on


I have a new tank and rear tire for it i still need to install.
« Last Edit: September 09, 2009, 08:32:35 AM by wrx84 »
instagram- Daytoncaferacers, ian_native
Facebook- Daytoncaferacers

78-cb750
71-cl450
82-xv920

Offline sangyo soichiro

  • Tuck
  • Master
  • *****
  • Posts: 2,167
  • ☢ the atomic playboy ☠
Re: Project "Fried Rice"
« Reply #1 on: September 09, 2009, 09:44:38 AM »
Can't wait to see more.  There are a lot of guys building bobbers here.  I like the bike's stance in that third photo.  Are you going to run the front wheel brakeless?  Brave lad if so.   ;)
1974 CB 750
1972 CB 750 http://forums.sohc4.net/index.php/topic,57974.0.html
1971 CL 350 Scrambler
1966 Black Bomber
Too many others to name…
My cross country trip: http://forums.sohc4.net/index.php/topic,138625.0.html

Offline wrx84

  • Full Member
  • *
  • Posts: 10
Re: Project "Fried Rice"
« Reply #2 on: September 09, 2009, 01:13:21 PM »
I don't know yet; i rode the bike before i took it apart without the front brake. I needed to brake early and use a lot of engine braking. Right now i will  run it without front brakes but maybe on the next bike i build i will use the front brakes.
instagram- Daytoncaferacers, ian_native
Facebook- Daytoncaferacers

78-cb750
71-cl450
82-xv920

Offline wrx84

  • Full Member
  • *
  • Posts: 10
Re: Project "Fried Rice"
« Reply #3 on: September 13, 2009, 01:17:56 PM »
New tank for the bike!


instagram- Daytoncaferacers, ian_native
Facebook- Daytoncaferacers

78-cb750
71-cl450
82-xv920

Offline kerryb

  • Not a very
  • Expert
  • ****
  • Posts: 1,155
  • 78 750k 74 cb550k, '83GL1100 FXSTC, 1979 Wilmac
Re: Project "Fried Rice"
« Reply #4 on: September 18, 2009, 04:52:13 PM »
Looks good so far.    I can't imagine success in a panic stop without my front brake.  What style are you aiming far in the end?

I like your project title too.
intrigued by the wail...seduced by the scream.

Offline scartail

  • Hot Shot
  • ***
  • Posts: 286
Re: Project "Fried Rice"
« Reply #5 on: September 18, 2009, 06:53:56 PM »
I've gota say the rigid styling is rubbing off on me. That is a nice looking project. Keep it up.
'89 Hawk GT, newly acquired, daily beater...
'76 CB550, was my daily beater... my cafe project...
'72 Yamaha R5, newly acquired project... donated to my buddy...
'67 Suzuki T20, still working on her too... Currently in pieces...

bobbyrivera

  • Guest
Re: Project "Fried Rice"
« Reply #6 on: September 19, 2009, 10:18:25 PM »
Looking badass so far.  Is that a weld-on hardtail from TCB Choppers?  Those Mac drag pipes look great too.  I can't wait to see the finished bike. 

Offline wrx84

  • Full Member
  • *
  • Posts: 10
Re: Project "Fried Rice"
« Reply #7 on: April 30, 2010, 03:05:26 PM »
Alright guys, I think I have a problem. So im on the last leg of getting this thing completed and today I let it actually run for a few minutes and it started smoking >:(. I think I have a blown head gasket because from what I observed I think that there is oil getting into the exhaust. The bike has not ran this long in a long time.

Could it just be burning some old stuff out and if so how long would it take to burn the stuff out?

This is a 1974 cb750, If I wanted to buy another motor what other year motors could I use?
instagram- Daytoncaferacers, ian_native
Facebook- Daytoncaferacers

78-cb750
71-cl450
82-xv920

Offline fastbroshi

  • Puppet
  • Old Timer
  • ******
  • Posts: 2,645
Re: Project "Fried Rice"
« Reply #8 on: April 30, 2010, 05:03:32 PM »
   Could be rings, could be valve seals.
Just call me Timmaaaaay!!!

Offline wrx84

  • Full Member
  • *
  • Posts: 10
Re: Project "Fried Rice"
« Reply #9 on: April 30, 2010, 09:02:18 PM »
Here is what she looks like as of today broken throttle cable and all.

Does anybody know where i can get a throttle cable that splits off into 4 cables that go into each carb? I'm trying to read up as much as possible and it seems like there is more than one type of carbs that come on a 74 cb750.


EDIT

I took a picture to try and make sense of my wording. The cable goes into each carb; most cables i have found for sale are just a single cable that hooks into a linkage that controls all 4 carbs.



EDIT 2
Found the type of throttle cable i need but please tell me i can find one cheaper! This one is in japan and $110.

« Last Edit: April 30, 2010, 09:57:38 PM by wrx84 »
instagram- Daytoncaferacers, ian_native
Facebook- Daytoncaferacers

78-cb750
71-cl450
82-xv920

Offline fastbroshi

  • Puppet
  • Old Timer
  • ******
  • Posts: 2,645
Just call me Timmaaaaay!!!

Offline wrx84

  • Full Member
  • *
  • Posts: 10
Re: Project "Fried Rice"
« Reply #11 on: April 30, 2010, 10:05:47 PM »
So are these the carbs that originally came on the bike?
instagram- Daytoncaferacers, ian_native
Facebook- Daytoncaferacers

78-cb750
71-cl450
82-xv920

Offline fastbroshi

  • Puppet
  • Old Timer
  • ******
  • Posts: 2,645
Re: Project "Fried Rice"
« Reply #12 on: April 30, 2010, 10:12:34 PM »
   Got me bub, I ride a 550.  Just a little info I gleaned from reading here a bit.  I thought they changed them after the K1.  Most likely you've got an old set of carbs someone set aside your PO was lucky enough to come across.   Do you see any stampings on the carb body that might identify them?
Just call me Timmaaaaay!!!

Offline wrx84

  • Full Member
  • *
  • Posts: 10
Re: Project "Fried Rice"
« Reply #13 on: April 30, 2010, 10:21:31 PM »
On the side it says KEIHIN other than that i do not see numbers. I am going to take them off sometime this weekend to clean them and possibly rebuild them since i will have to rebuild the motor. Thanks for finding that ebay sale; im happy i know what year bike these came from because i have been looking at 74 carbs and they look nothing like these.
« Last Edit: April 30, 2010, 10:23:10 PM by wrx84 »
instagram- Daytoncaferacers, ian_native
Facebook- Daytoncaferacers

78-cb750
71-cl450
82-xv920

Offline fastbroshi

  • Puppet
  • Old Timer
  • ******
  • Posts: 2,645
Re: Project "Fried Rice"
« Reply #14 on: April 30, 2010, 10:33:16 PM »
I sometimes use Honda dealer sites to look at parts diagrams, like Bettencourts.com.  You can put in your year, model, etc and then compare.  It would be a good way to find what year they stopped putting them on.
Just call me Timmaaaaay!!!

Offline Ryan6838

  • Hot Shot
  • ***
  • Posts: 266
Re: Project "Fried Rice"
« Reply #15 on: May 01, 2010, 01:34:12 AM »
Nice job looks good. Any way we could get a side view with the stock tank? Planing a hard tail for my next build. Keep us posted.
1978 cb750k

Offline wrx84

  • Full Member
  • *
  • Posts: 10
Re: Project "Fried Rice"
« Reply #16 on: May 01, 2010, 09:06:55 AM »
Thanks man, i sold my stock tank but if my friend still has his; i will get a pic.
instagram- Daytoncaferacers, ian_native
Facebook- Daytoncaferacers

78-cb750
71-cl450
82-xv920