« previous next »
Pages: [1]   Go Down

Author Topic: tappet adjustment??  (Read 889 times)

0 Members and 1 Guest are viewing this topic.

Offline apostrophe28

  • Enthusiast
  • **
  • Posts: 104
tappet adjustment??
« on: September 23, 2009, 10:41:30 AM »
ive got the theory of how to adjust the clearences, ive got the tappet covers off....and now i'm not sure where i should be measuring for the .08mm clearances?!


is it between the very bottom disk part and the arm because mine looks to have about 1/4 inch room rite now..please help


77' 750k
Logged
1977 750k

Offline Gordon

  • Global Moderator
  • Really Old Timer ...
  • *****
  • Posts: 12,114
  • 750K1, 550K2
Re: tappet adjustment??
« Reply #1 on: September 23, 2009, 10:54:56 AM »
The bottom of the screw that you turn to set the clearance is what comes in contact with the top of the valve stem, and that's where you measure.  You can't actually see the spot with the valve cover on, but you can get your feeler gauges in there. 
Logged

Offline jeepster

  • Hot Shot
  • ***
  • Posts: 292
Re: tappet adjustment??
« Reply #2 on: September 23, 2009, 11:13:45 AM »
What bike? On my Nighthawk you measure between the rocker pad and cam lobe.
Logged
"An ounce of prevention is worth more if you break it up into nickel bags."

Offline Gordon

  • Global Moderator
  • Really Old Timer ...
  • *****
  • Posts: 12,114
  • 750K1, 550K2
Re: tappet adjustment??
« Reply #3 on: September 23, 2009, 11:27:11 AM »
Logged

Offline jeepster

  • Hot Shot
  • ***
  • Posts: 292
Re: tappet adjustment??
« Reply #4 on: September 23, 2009, 11:28:59 AM »
Logged
"An ounce of prevention is worth more if you break it up into nickel bags."

Offline BVCB650

  • Too Much Thin Air
  • Hot Shot
  • ***
  • Posts: 561
Re: tappet adjustment??
« Reply #5 on: September 23, 2009, 11:32:42 AM »
Quote from: jeepster on September 23, 2009, 11:13:45 AM
What bike? On my Nighthawk you measure between the rocker pad and cam lobe.


Yea, we have it easy.
Logged
1979 CB650, 25K miles, recently refurbished
Pages: [1]   Go Up
« previous next »