Stayed up till 3am and did tons!
Cleaned piston ring slots with a piece of old ring. Cleaned all the head bolt holes and will be chasing them when I get a set of chasers.
Installed new rings onto pistons, cleaned the head and head cover. The valve seals have already been replaced and valves lapped.
Then removed, disassembled and cleaned the rear fender and light tree. Had to straighten out the fender a little so it's nice and straight now.
.
Then of course pulled the motor out of this frame to put it the titled and registered frame next chance I get.
Oh, and oiled up the choke and clutch cable and hung them for the night so the oil might work its way all throughout the cable.
It's nice having a parts bike that is nearly complete. Might get it up and running some day, but want to finish the one up for the summer.
This is the first time I have ever touched the pistons on an engine that I am expecting to have running. I'm still pretty nervous that I'm going to mess it all up.
Cheers!