Author Topic: CB750A Street ET bracket drag bike. A year to build it. (Read 708177 times)

Bill/BentON Racing · « **Reply #4200 on:** April 19, 2014, 07:46:05 PM »

Quote from: MRieck on April 19, 2014, 02:45:00 PM

Quote from: Sam Green Racing on April 19, 2014, 01:48:46 PM
He was really pi$$ed off Mike, this picture tells it all.
You think Sam? That's Bull$hit.

Yes,I told them that! So glad he did it, would have left an awful black mark for SGMP and Man Cup!

Bill/BentON Racing · « **Reply #4201 on:** April 23, 2014, 04:18:21 AM »

Damn, we, they racing at Commerce this weekend! Not me, gotta go to Paducah and pick up the CB750A I bought! Oh well, priorities!

Next race will be May 24th for me, then Virginia in June!

dragracer · « **Reply #4202 on:** April 23, 2014, 12:21:32 PM »

Bill,
Its a double points race- you sure you want to miss this one??

Just get up early on sunday and pick the bike up.

Bill/BentON Racing · « **Reply #4203 on:** April 23, 2014, 12:48:01 PM »

Frank, so is June 20th weekend, we'll be in Virginia! Man Cup. Will run the 24th and Wally race and some others. Want to concentrate on Man Cup, but need the seat time, so we'll see.

Bill/BentON Racing · « **Reply #4204 on:** April 27, 2014, 08:52:33 AM »

Tiedowns, who needs tiedowns, Im McGiver Jr. ! Haha, wrong! Lucky man!

Samauto, meet Caspar the Ghost Rider!

Bill/BentON Racing · « **Reply #4205 on:** April 27, 2014, 08:55:05 AM »

More later.

jweeks · « **Reply #4206 on:** April 27, 2014, 01:47:09 PM »

So, that's the orange thing under the seat.(remote oil filter) It was slow out of the hole with that rear brake setup. You've got better for Sam's bike. I know you're dying to get the valve cover off it. I'd suspect a big cam unless the cover was all the show. Self starting so I'd suspect moderate compression. What do we have with pistons and rods? Lots of goodies for someone on the site this weekend...

Bill/BentON Racing · « **Reply #4207 on:** April 27, 2014, 02:58:03 PM »

Jon, yesterday wore me out. 14.5 hours on the road straight, no breaks! Just unloaded it, starting to rain, under tarp tonight... And yes after I clean up, Im going in with a 17mm to see what's under the tappet covers at least! Has a charging system, push/ pull on smoothies, works good. Still has parking brake and kick starter shaft! Oh, Mike, it has a STAND also! Haha Sam!

Caspar may have not made its last pass, cause what'll be left, would still be a good start, frame #70000xx, engine same.

bear · « **Reply #4208 on:** April 27, 2014, 05:29:42 PM »

Billy,
You never cease to amaze me.

Where do you find all this gear?
The "Bat Cave" must be like the inside of Doctor Who's Tardis by now!

Cheers,
Brian

bwaller · « **Reply #4209 on:** April 27, 2014, 06:16:30 PM »

Yeah Bear, I have to agree. Bill you're a mover & a shaker man. Just when I thought you were selling all you're CB goodies a few months ago, now it's obvious you were just making room.

Well done.

Bill, I need a floatbowl & plug for VM29mm smoothbores. Any extra's? I'll call Sudco tomorrow.

Bill/BentON Racing · « **Reply #4210 on:** April 28, 2014, 04:43:53 AM »

Brent, they got em,if not I do!

Bill/BentON Racing · « **Reply #4211 on:** April 28, 2014, 03:53:06 PM »

3 guesses where this is going!

Sammy, some bling for Samauto! Who said you had a vote? Oh wait BOTM, you may not have voted. Oh well, you'll need long arms to reach out and stop me! Haha

Medyo Bastos · « **Reply #4212 on:** April 28, 2014, 08:19:36 PM »

i really thought you were going to send that to memphis!

Bill/BentON Racing · « **Reply #4213 on:** April 28, 2014, 09:00:37 PM »

For the right price...minus the smoothbores, it's a pretty cool bike!

Could build a nice one with this as a start! Let me know!

BPellerine · « **Reply #4214 on:** April 29, 2014, 04:43:22 PM »

another rc swingarm unbelievable!bill

Bill/BentON Racing · « **Reply #4215 on:** April 29, 2014, 06:33:36 PM »

Yeh!

LArzFroMArz · « **Reply #4216 on:** May 02, 2014, 05:30:21 AM »

Looking forward to the full report, wish I could have spelled you on the road...

L

Bill/BentON Racing · « **Reply #4217 on:** May 02, 2014, 04:41:32 PM »

Valve cover about to be pulled in next hour!

kmb69 · « **Reply #4218 on:** May 02, 2014, 06:41:46 PM »

Bill, What is the length on the RC swingarms? One for sale? Keith

Bill/BentON Racing · « **Reply #4219 on:** May 02, 2014, 07:31:57 PM »

Will measure...yeh, they are all Clubfoots drag race only!

Bill

Bill/BentON Racing · « **Reply #4220 on:** May 03, 2014, 04:49:52 AM »

So far a RC cam sprocket, that's slotted! H/D valve springs, no cam markings that mean anything yet. Going to pull top end today....... I hope there's time!

bwaller · « **Reply #4221 on:** May 03, 2014, 07:26:11 AM »

Better wait for the moon to start howling.

Oh what the hell the moon must be up somewhere!

Bill/BentON Racing · « **Reply #4222 on:** May 03, 2014, 08:55:13 AM »

Brent, my sentiments, time to howl!

Sam's booked flight for June,love those Bingo ladies!

We got Brother Bear interested in the auto drag chassis!

Bear, you never cease to amaze me!

. The lay down Dragbike Tiger, has a rider, Mr. Voodoo Racer, so top end coming off this week, BIG bore going in! Hold on Keith!

plan to debut it at Commerce in Aug Man Cup in Commerce!

Bill
This one just got 122.5's, we'll see!

Purple Rain just cranked and installed mirror! Which means ride time! K. Mike, I'm opening the " box" tonight!

Yes, me neighbors loves me! Haha!

You mechanic? ........ Might be your problem!!

...Apple Pie Eyes!

dusterdude · « **Reply #4223 on:** May 03, 2014, 05:13:11 PM »

Is sam coming to va?!!!!!

Sent from my iPhone using Tapatalk

Bill/BentON Racing · « **Reply #4224 on:** May 03, 2014, 05:20:44 PM »

Not yes, He'll YES!

News:

Author Topic: CB750A Street ET bracket drag bike. A year to build it. (Read 708177 times)