Author Topic: CB750A Street ET bracket drag bike. A year to build it. (Read 620664 times)

Sam Green Racing · « **Reply #50 on:** January 04, 2010, 06:30:47 AM »

Quote from: honda3303 on December 31, 2009, 12:29:07 PM

valdosta in early march is our plan. I've winterized the honda and will change the oil and charge the batter for March. We will be debuting something different with our kawasaki dragbikes. Steve and I have put hayabusa motors in them. Bone stock as far as horsepower goes. I have an 08 motor and I will be hoping to run pro et and super comp with it if all goes well. I mention it because most people in this section seem very innovative. I know our idea isn't new but doing it for the first time has it's challenges.

Good luck with the Busa motors Chad, should see you going REAL FAST for a change

Have you done it for the reliability factor or just to go that bit quicker? good luck anyway and hoping to see you in March.

Sam.

honda3303 · « **Reply #51 on:** January 04, 2010, 09:22:12 AM »

reliability is 1 factor. I was running 9.30s on a kz motor. I bought a stock 08 motor for less than i paid for the kz. It will need the oil changed less, will charge itself, start itself, run on pump gas, last longer, and run in the 8's. I am not a speed junkie, it just makes sense/cents. fast enough to run super comp also.

Sam Green Racing · « **Reply #52 on:** January 07, 2010, 09:10:15 AM »

You're still my inspiration Chad

good luck with the new motors.

Sam.

dragracer · « **Reply #53 on:** January 20, 2010, 08:21:04 PM »

Anybody have any updated pics of Sams project bike. Wanna see some pics, wanna see some pics!!!!

Sam Green Racing · « **Reply #54 on:** January 21, 2010, 05:39:49 AM »

Don't be getting to exited now Frankie boy,

It's all in Mikes hands now and has to be fitted in between paying customers work, he has quite a backlog of work or so it seemed when I was there.
I hope you're both keeping well Frank, I've been full of a cold for the last two weeks but have been kept very busy in my new job at work, time is flying by.

regards Sam.

dragracer · « **Reply #55 on:** January 23, 2010, 10:37:14 PM »

Quote from: SamCB750A on January 21, 2010, 05:39:49 AM

Don't be getting to exited now Frankie boy, It's all in Mikes hands now and has to be fitted in between paying customers work, he has quite a backlog of work or so it seemed when I was there.
I hope you're both keeping well Frank, I've been full of a cold for the last two weeks but have been kept very busy in my new job at work, time is flying by.

regards Sam.

Sorry to hear you've been under the weather Sam. Hope you're geting along alright now. I'm ready to see some progress pictures of the 750 auto. I know you guys will get it right but as the saying goes, "fine wine takes time".

All good on this end Sam. Just trying to prep the dragbikes for the start of the race season in March. Have to put a light weight wheel on the front of the wife's Kawi Pro ET bike and brace up the wheelie bars a bit. After that i'll tear down the top end of the motor for a quick valve job and piston ring replacement. Next will be a new set of wheelie bars for my small tire Kaw super comp bike- its long overdue. Will also replace my shift drum and shift forks- i think i bent them at Rockingham when i rolled out of the throttle a few times when the bike crossed up on me due to improper wheelie bar adjustment and excessive flexing. That 1-2-3 auto tranny didn't take to kindly to the roll out. The old SOHC is sitting in the corner waiting to be petted but she'll just have to wait for the right time. Man i love that bike, she always performs well no matter how long i park it.

Hopefully time won't creep up on us. March is approaching fast.

Sam Green Racing · « **Reply #56 on:** January 26, 2010, 05:31:10 AM »

Ya need a real auto box Frank

these auto drag type boxes sure don't like it when you roll them off.

good luck for this season, hope you're ready on time.

Sam.

BLUE71TURBO · « **Reply #57 on:** February 19, 2010, 01:09:02 AM »

So what's going on with this project ? How far is it along ? Inquiring minds want to know !!

Sam Green Racing · « **Reply #58 on:** February 20, 2010, 09:25:41 AM »

The head is being worked on by the master and the Block is being bored for the JE 836 pistons by Rick Stetson. Mike found the wireing harness knackered and was shocked to find it was still charging, it all has to be replaced.

Sam.

dragracer · « **Reply #59 on:** February 26, 2010, 02:07:32 PM »

Still waiting for those dang pictures or is this a top secret project?

??

dusterdude · « **Reply #60 on:** February 26, 2010, 04:56:23 PM »

frank,cant be too damn secret.not with him wearing those white ass leathers.

Sam Green Racing · « **Reply #61 on:** March 07, 2010, 01:19:35 PM »

Mike, air shifter and secret electronic devise is on its way with Mr Stetson, pick it up when you see him.
Ignition system will come to you direct from Orient Express Racing, New York in the next 2 weeks.

Sam.

andy750 · « **Reply #62 on:** March 09, 2010, 08:45:37 AM »

Here are some pics of Sams sorry engine

and Sam in his favourite diner...

cheers
Andy

Bill/BentON Racing · « **Reply #63 on:** March 09, 2010, 05:09:54 PM »

Bucky,this past weekend,dropped Sam @ airport yesterday afternoon.We had FUN!Saw a 201 mph run with no wheelie bars,Larry (Spiderman) McBride put down back to back 5 sec.runs on Sat.Forum member Chad Isley took his CB750A into the 3rd round along w/ his 73 Kawi.Congrats Chad!Met Larry Sunday morning,really nice guy.Skip and Jennifer @ Orient Express took great care of us (top secret electronics) what fine people and co.WOW what a blast,Nov we get to RACE,oh hell yes,let's go,Mike our bike ready yet? Gotta go look for some white leathers!

,Bill

jtb · « **Reply #64 on:** March 14, 2010, 11:30:59 AM »

Sam, Do I remember a post saying you might be coming to Montgomery this year?

Sam Green Racing · « **Reply #65 on:** March 15, 2010, 03:56:29 AM »

Quote from: jtb on March 14, 2010, 11:30:59 AM

Sam, Do I remember a post saying you might be coming to Montgomery this year?

Hi young Jonny B, if all goes well at Valdosta in November, Montgomery will be on the list for next year along with Atlanta and 2 at Valdosta, funds permiting. I'll get to meet you one way or another.

Sam.

jtb · « **Reply #66 on:** March 15, 2010, 06:02:52 PM »

I'll figure out a way to get to Valdosta in November.

Sam Green Racing · « **Reply #67 on:** March 25, 2010, 04:57:09 AM »

andy750 · « **Reply #68 on:** April 10, 2010, 05:27:13 PM »

So today Mike (MRieck) opened up Sams engine....lots of oil

Afterwards...

Now how to put it all back together!

Andy

Bill/BentON Racing · « **Reply #69 on:** April 11, 2010, 12:51:46 PM »

It might be similar....,but it won't be the SAME!!!!

.....@ 7+ seconds quicker! ;)Bill

Leino · « **Reply #70 on:** April 11, 2010, 10:54:30 PM »

Quote from: bellcow54 on April 11, 2010, 12:51:46 PM

It might be similar....,but it won't be the SAME!!!! .....@ 7+ seconds quicker! ;)Bill

If the head Mike ported for my JMR-Suzuki makes it 7 seconds quicker... I'll be in the high 3's

.

j4hfr34k · « **Reply #71 on:** May 27, 2010, 09:34:55 AM »

this is an awesome project and very interesting. Im especially interested as i have three hondamatics one of which was formerly drag raced. When i get it back over here ill bee starting a project, thinking of making a cafe-matic. got bunch of ideas but no cluee as to costs or anything, but thats how it goes when its all in your head, its the getting it out that is the dificult part.

Sam Green Racing · « **Reply #72 on:** May 28, 2010, 04:12:38 AM »

Quote from: j4hfr34k on May 27, 2010, 09:34:55 AM

this is an awesome project and very interesting. Im especially interested as i have three hondamatics one of which was formerly drag raced. When i get it back over here ill bee starting a project, thinking of making a cafe-matic. got bunch of ideas but no cluee as to costs or anything, but thats how it goes when its all in your head, its the getting it out that is the dificult part.

Where are you in MS, I have relatives on the coast.

Sam

j4hfr34k · « **Reply #73 on:** May 28, 2010, 06:34:16 AM »

im a couple hours from the coast, i am 75 miles north of new orleans.

Sam Green Racing · « **Reply #74 on:** May 30, 2010, 10:14:16 AM »

Quote from: j4hfr34k on May 28, 2010, 06:34:16 AM

im a couple hours from the coast, i am 75 miles north of new orleans.

I guess you're far enough inland to miss the brunt of the hurricanes, my relatives live in Pascagoula and seem to get the worst of them. It's a nice place to live but expensive and dangerous.

Sam.

News:

Author Topic: CB750A Street ET bracket drag bike. A year to build it. (Read 620664 times)