« previous next »
Pages: 1 2 3 [4] 5 6   Go Down

Author Topic: Building an endurance engine  (Read 28296 times)

0 Members and 1 Guest are viewing this topic.

Offline turboguzzi

  • Old Timer
  • ******
  • Posts: 4,084
Re: Building an endurance engine
« Reply #75 on: March 30, 2010, 10:59:36 AM »
Do you have all the parts you need, I can see quite a few missing :)

If its the original honda disc, then its stainless steel, didnt they teach you that in the university?  ;)

And did you send the photos to Montanari to get your bike card?

TG



Logged

Offline livefast_dieold

  • Hot Shot
  • ***
  • Posts: 324
Re: Building an endurance engine
« Reply #76 on: March 30, 2010, 02:34:09 PM »
Quote from: turboguzzi on March 30, 2010, 10:59:36 AM
Do you have all the parts you need, I can see quite a few missing :)

If its the original honda disc, then its stainless steel, didnt they teach you that in the university?  ;)

And did you send the photos to Montanari to get your bike card?

TG





Thanks...the problem is that they teach me too well that at university! So sometimes I'm full of doubt about materials,that the only thing that will reassure me is to take a piece of it and analyzing at the microscope to see it's grain structure... ::)

Yes, sent the picture this morning (it was the last day, just in time)
Logged

Offline turboguzzi

  • Old Timer
  • ******
  • Posts: 4,084
Re: Building an endurance engine
« Reply #77 on: March 31, 2010, 07:50:30 AM »
You sent him THAT picture?.....

I'd say it's sitting a bit low  ;)

Logged

Offline livefast_dieold

  • Hot Shot
  • ***
  • Posts: 324
Re: Building an endurance engine
« Reply #78 on: April 01, 2010, 02:58:46 PM »
Quote from: turboguzzi on March 31, 2010, 07:50:30 AM
You sent him THAT picture?.....

I'd say it's sitting a bit low  ;)



It's just to start the burocracy machine, I will give him the pictures as soon as it's finisched.
Logged

Offline turboguzzi

  • Old Timer
  • ******
  • Posts: 4,084
Re: Building an endurance engine
« Reply #79 on: April 02, 2010, 03:23:19 AM »
Quote from: livefast_dieold on April 01, 2010, 02:58:46 PM
Quote from: turboguzzi on March 31, 2010, 07:50:30 AM
You sent him THAT picture?.....

I'd say it's sitting a bit low  ;)



It's just to start the burocracy machine, I will give him the pictures as soon as it's finisched.

OK, let me know if you need anything. I'll be down in Adria Friday afternoon,

And dont forget that some very fine race bikes have been finished the day before the race at the track!.  There'll be a bunch of people that could help you there, me included.

Good luck!

TG
Logged

Offline andy750

  • Really Old Timer ...
  • *******
  • Posts: 7,938
Re: Building an endurance engine
« Reply #80 on: April 02, 2010, 04:50:21 AM »
I am really keen to see how this turns out and if you can make it by the 10th (I hope so!). Please take some photos at the track!!! (you included TG ;)).

Good luck!!
Andy
Logged
Current bikes
1. CB750K4: Long distance bike, 17 countries and counting...2001 - Trans-USA-Mexico, 2003 - European Tour, 2004 - SOHC Easy Rider Trip , 2008 - Adirondack Tour 2-up , 2013 - Tail of the Dragon Tour , 2017: 836 kit install and bottom end rebuild. And rebirth: http://forums.sohc4.net/index.php/topic,173213.msg2029836.html#msg2029836
2. CB750/810cc K2  - road racer with JMR worked head 71 hp
3. Yamaha Tenere T700 2022

Where did you go on your bike today? - http://forums.sohc4.net/index.php?topic=45183.2350

Offline livefast_dieold

  • Hot Shot
  • ***
  • Posts: 324
Re: Building an endurance engine
« Reply #81 on: April 07, 2010, 06:10:04 PM »
Working hard. Tomorrow will be ready to fire it up. Fingers crossed!!!

Logged

Offline Doctor_D

  • Hot Shot
  • ***
  • Posts: 722
Re: Building an endurance engine
« Reply #82 on: April 07, 2010, 06:17:33 PM »
Good luck.
Logged
Take care,
David
___________________________________________
1975 CB 750F - Project page: http://forums.sohc4.net/index.php?topic=66026.msg725479#msg725479
1978 CX500
1971 Norton Commando

Offline turboguzzi

  • Old Timer
  • ******
  • Posts: 4,084
Re: Building an endurance engine
« Reply #83 on: April 07, 2010, 10:54:10 PM »
Figa!
Logged

Offline Sam Green Racing

  • Moderator
  • Really Old Timer ...
  • *****
  • Posts: 16,068
  • I REALLY? hate black rims.
Re: Building an endurance engine
« Reply #84 on: April 07, 2010, 11:39:03 PM »
Looking real good Ric, good luck on your first outing.

Sam. ;)
Logged
C95 sprint bike.
CB95 hybrid race bike
CB95 race bike
CB92
RS 175. sprint/land speed bike
JMR Racing CB750A street ET drag bike

Offline voxonda

  • Master
  • *****
  • Posts: 2,231
Re: Building an endurance engine
« Reply #85 on: April 08, 2010, 12:49:36 AM »
looking real good, Riccardo. Cannot wait to see the finished bike.

Ciao, Rob
Logged
Better sorry for failing then for the lack of trying.

Offline livefast_dieold

  • Hot Shot
  • ***
  • Posts: 324
Re: Building an endurance engine
« Reply #86 on: April 08, 2010, 04:18:16 AM »
IT'S ALIVE  ;D

and sound great too.
Logged

Offline turboguzzi

  • Old Timer
  • ******
  • Posts: 4,084
Re: Building an endurance engine
« Reply #87 on: April 08, 2010, 04:36:14 AM »
Congrats! nothing like the joy when it first starts after all the crazy stuff you've done to the motor  :)

Mine's been fired up today too.

Ric, try to be there friday evening so that you can do a free session early Satruday morning. They have a very full program for this weekend and I believe that qualifying will start right after lunch.


Good luck

TG

Logged

Offline livefast_dieold

  • Hot Shot
  • ***
  • Posts: 324
Re: Building an endurance engine
« Reply #88 on: April 08, 2010, 04:39:47 AM »
I live an hour and a half away from the track, I'll wake up early saturday morning, no prob  ;D
Logged

Offline andy750

  • Really Old Timer ...
  • *******
  • Posts: 7,938
Re: Building an endurance engine
« Reply #89 on: April 08, 2010, 04:41:01 AM »
Well done!! Now go race!  ;D

Good luck
Andy
Logged
Current bikes
1. CB750K4: Long distance bike, 17 countries and counting...2001 - Trans-USA-Mexico, 2003 - European Tour, 2004 - SOHC Easy Rider Trip , 2008 - Adirondack Tour 2-up , 2013 - Tail of the Dragon Tour , 2017: 836 kit install and bottom end rebuild. And rebirth: http://forums.sohc4.net/index.php/topic,173213.msg2029836.html#msg2029836
2. CB750/810cc K2  - road racer with JMR worked head 71 hp
3. Yamaha Tenere T700 2022

Where did you go on your bike today? - http://forums.sohc4.net/index.php?topic=45183.2350

Offline bwaller

  • Really Old Timer ...
  • *******
  • Posts: 7,484
Re: Building an endurance engine
« Reply #90 on: April 08, 2010, 04:50:20 AM »
Have a good weekend boys.
Logged

Offline voxonda

  • Master
  • *****
  • Posts: 2,231
Re: Building an endurance engine
« Reply #91 on: April 08, 2010, 05:08:26 AM »
And bring back some pic's. Good luck to you both, this weekend!
Logged
Better sorry for failing then for the lack of trying.

Offline livefast_dieold

  • Hot Shot
  • ***
  • Posts: 324
Re: Building an endurance engine
« Reply #92 on: April 08, 2010, 05:59:10 AM »
well, the engine is running but so far:

-battery is not charging,
- still waiting the tyres to arrive,
-have to install brakes.

 ::)
Logged

Offline turboguzzi

  • Old Timer
  • ******
  • Posts: 4,084
Re: Building an endurance engine
« Reply #93 on: April 08, 2010, 06:27:43 AM »
Quote from: livefast_dieold on April 08, 2010, 05:59:10 AM
well, the engine is running but so far:

-battery is not charging,
- still waiting the tyres to arrive,
-have to install brakes.

 ::)

Brakes slow you down, you dont need no stinking brakes!

Got here a new Conti TKV11 90/90-18 that I took just in case I couldnt find race avons, 70 euros new, its yours for 50.... ;)

Quite few people do endurance with total loss ignition, switching batteries at pit stops.

If you are running a good electronic ignition, a 10-12 Ah battery should give you two-three hours of running = one battery change in 4 hours race. Just remeber to use the kick start, not the electric one  :)

TG
Logged

Offline livefast_dieold

  • Hot Shot
  • ***
  • Posts: 324
Re: Building an endurance engine
« Reply #94 on: April 08, 2010, 07:05:22 AM »
Quote from: turboguzzi on April 08, 2010, 06:27:43 AM
Quote from: livefast_dieold on April 08, 2010, 05:59:10 AM
well, the engine is running but so far:

-battery is not charging,
- still waiting the tyres to arrive,
-have to install brakes.

 ::)

Brakes slow you down, you dont need no stinking brakes!

Got here a new Conti TKV11 90/90-18 that I took just in case I couldnt find race avons, 70 euros new, its yours for 50.... ;)

Quite few people do endurance with total loss ignition, switching batteries at pit stops.

If you are running a good electronic ignition, a 10-12 Ah battery should give you two-three hours of running = one battery change in 4 hours race. Just remeber to use the kick start, not the electric one  :)

TG

good to know!!!

Tyres just arrive, I'm tring the heidenau.
Logged

Offline Howell

  • Honda the power of dreams
  • Hot Shot
  • ***
  • Posts: 573
    • CB500 classic racing
Re: Building an endurance engine
« Reply #95 on: April 08, 2010, 12:03:52 PM »
Very nice looking bike.
I hope it runs at it looks.
Logged
You meet the nicest people on a Honda

Offline livefast_dieold

  • Hot Shot
  • ***
  • Posts: 324
Re: Building an endurance engine
« Reply #96 on: April 08, 2010, 01:56:30 PM »
Ok, BIG problem. This afternoon I went installing the tyres, but the guy at the shop wasn't able to install the 130 mm tyre I ordered. Turns out the rear rim (which is an aluminium cast, made in the '70 by OZ) is for a 500 four, not 750.
Now I put on a 3.50 tyre (110 mm), the original size for a 500, how about racing with it? Or is it too dangerous?
Logged

Offline MCRider

  • Such is the life of a
  • Really Old Timer ...
  • *******
  • Posts: 14,376
  • Today's Lesson: One good turn deserves another.
Re: Building an endurance engine
« Reply #97 on: April 08, 2010, 02:11:41 PM »
Quote from: livefast_dieold on April 08, 2010, 01:56:30 PM
Ok, BIG problem. This afternoon I went installing the tyres, but the guy at the shop wasn't able to install the 130 mm tyre I ordered. Turns out the rear rim (which is an aluminium cast, made in the '70 by OZ) is for a 500 four, not 750.
Now I put on a 3.50 tyre (110 mm), the original size for a 500, how about racing with it? Or is it too dangerous?
You know I can't really address your question. But I just remember the skinny-a-s tires that Mike Hailwood ran on and always thought no matter how much tire or technology I had under me, I could never beat him.
Logged
Ride Safe:
Ron
1988 NT650 HawkGT;  1978 CB400 Hawk;  1975 CB750F -Free Bird; 1968 CB77 Super Hawk -Ticker;  Phaedrus 1972 CB750K2- Build Thread
"Sometimes the light's all shining on me, other times I can barely see, lately it appears to me, what a long, strange trip its been."

Offline turboguzzi

  • Old Timer
  • ******
  • Posts: 4,084
Re: Building an endurance engine
« Reply #98 on: April 08, 2010, 02:47:55 PM »
Quote from: livefast_dieold on April 08, 2010, 01:56:30 PM
Ok, BIG problem. This afternoon I went installing the tyres, but the guy at the shop wasn't able to install the 130 mm tyre I ordered. Turns out the rear rim (which is an aluminium cast, made in the '70 by OZ) is for a 500 four, not 750.
Now I put on a 3.50 tyre (110 mm), the original size for a 500, how about racing with it? Or is it too dangerous?

Not a real problem, certainly not in Adria which is quite a slow track. Actually it might good and help make the bike more flickable, seriously.

Wouldnt worry too much.

Regardless, next time remember that before ordering tires, you should check your rim widths  ;)

Last thing, (but might be too late) the Avon Racing AM23 130/650-18 "cantilever" is designed to work with narrow rims, even 2.15 accoridng to the specs. You might be in luck and find one to fit in Adria. It's expensive but it might be your only solution for a good rear tire on your narrow rim.

http://www.avonracing.com/club_page.aspx   
Logged

Offline petescb

  • Full Member
  • *
  • Posts: 19
Re: Building an endurance engine
« Reply #99 on: April 08, 2010, 03:07:19 PM »
Well, the rods are a weak link in the Honda Fours.  I doubt you can take the stockers over 836cc.  Otherwise, you need to have them shot-peened or else speak with the good people at Carillo.  And the chain primary drive is another weak spot. 
Logged
Pages: 1 2 3 [4] 5 6   Go Up
« previous next »