« previous next »
Pages: [1]   Go Down

Author Topic: Replacing pistons  (Read 740 times)

0 Members and 1 Guest are viewing this topic.

Offline Burnboy

  • Hot Shot
  • ***
  • Posts: 458
Replacing pistons
« on: February 03, 2010, 01:58:04 PM »
I need some new pistons, one of mine blew up. I saw a guy at a shop remove them from the rods by hand very easily, but the rods were out of the motor. Is there enough room on the cb750 to remove the pistons while still connected to the crank?
Logged
1975 CB750
1973 CB350F

Offline mcpuffett

  • Master
  • *****
  • Posts: 2,354
Re: Replacing pistons
« Reply #1 on: February 03, 2010, 02:18:22 PM »
Hi you will have to take the engine out of the frame to remove the top end of your engine before you can get to the pistons  ;), cheers Mick.
Logged
Honda CB750 KO 1970,   Honda VTX 1300 2006, Lancaster England.

Offline Burnboy

  • Hot Shot
  • ***
  • Posts: 458
Re: Replacing pistons
« Reply #2 on: February 03, 2010, 02:32:55 PM »
Ive gotten that far, I have the jogs off too, just wondering if I can get the pistons out with the rods still connected to the crank.
Logged
1975 CB750
1973 CB350F

Offline Whaleman

  • Hot Shot
  • ***
  • Posts: 551
Re: Replacing pistons
« Reply #3 on: February 03, 2010, 03:10:23 PM »
Yes
Logged
Pages: [1]   Go Up
« previous next »