Author Topic: Race and Performance parts for sale and wanted. (Read 294048 times)

Honcrr · « **Reply #125 on:** September 04, 2012, 11:17:52 AM »

Quote from: paul mcgee on April 28, 2012, 11:38:05 AM

Quote from: SamCR750A on January 26, 2011, 04:42:01 AM
Post your wants or needs here, must be race or performace related.

If you are a business, you should contact the forum admin before posting.

Sam.
cr rear brake made from t5 billet, ill make another if any one is intrested,

I am interesting to buy rear brake billet

freedomgli · « **Reply #126 on:** September 06, 2012, 11:57:38 AM »

Quote from: Honcrr on September 04, 2012, 11:17:52 AM

I am interesting to buy rear brake billet

Unfortunately I think you're out of luck. The user account for paul mcgee has been disabled or changed to guest only. A bunch of people on here expressed interest a few months ago when paul mcgee first showed off the goods but he never replied, sadly it appears he's gone in the wind....

Sam Green Racing · « **Reply #127 on:** September 07, 2012, 07:16:25 AM »

If I remember correctly, someone was rather rude to him about the price in another thread, I don't blame him for saying stuff you lot.

Sam.

jaguar · « **Reply #128 on:** September 07, 2012, 03:08:17 PM »

Thought maybe someone had a manifold and was looking for a set of carbs
Mikuni/solex PHH
Clean on the inside an out. Needs the gasket for the top bowl and accelerator pump replaced
Everything moves freely as it should.
One stack is damaged, see photo
K&N filters are in good shape.
Not off a CB750

A lot of people feel these are better then the weber side drafts
Adjustable float height and a few other cool features.

I was going to build these up and use them on one of my manifolds, but I have other things I need to do before so these need to go
$500 shipped in the USA

NickO · « **Reply #129 on:** September 12, 2012, 02:33:05 PM »

I have a used set of 64mm diameter pistons with high crowns that came with a CB750 cylinder block I recently acquired.

I'm modifying the block so these pistons are not needed. They have the mark "ART" on the skirt recess are complete with rings & pins.

Can post photographs if anyone is interested?

No reasonable offer refused!

jaguar · « **Reply #130 on:** September 12, 2012, 04:43:39 PM »

They dont look like this do they?

Ive been trying to sell these for a while now
I dont have a tone of info on them though

voxonda · « **Reply #131 on:** September 13, 2012, 11:58:46 AM »

Quote from: NickO on September 12, 2012, 02:33:05 PM

I have a used set of 64mm diameter pistons with high crowns that came with a CB750 cylinder block I recently acquired.

I'm modifying the block so these pistons are not needed. They have the mark "ART" on the skirt recess are complete with rings & pins.

Can post photographs if anyone is interested?

No reasonable offer refused!

Show me a pic, please Nick. Maybe something for a engine happens to lying around here. Cheers, Rob

NickO · « **Reply #132 on:** September 14, 2012, 01:33:50 AM »

Here you go Rob..................I can get some more images if these are not good enough, (the camera battery jossed-out before I could take any more)?

I have a standard set of F2 barrels c/w pistons and a F2 cylinder head too.

Music City Metalcraft · « **Reply #133 on:** September 15, 2012, 05:20:34 AM »

I am looking for one Henry Abe piston, marked HAINDST 900.
I have the rings and wrist pin, so only need a piston, preferred new.
Thanks

fang · « **Reply #134 on:** September 15, 2012, 10:04:52 AM »

Hey Music City,
I have a box of Henry Abe pistons. There's more than one variety. Can you PM me some pics of what you want. It would help if you can weigh it too -- I probably have a good match for you.

Music City Metalcraft · « **Reply #135 on:** September 15, 2012, 10:56:20 AM »

Perfect! I will take one out the box and send you the pic.
Thanks!

Music City Metalcraft · « **Reply #136 on:** September 15, 2012, 11:11:20 AM »

pic 1

Music City Metalcraft · « **Reply #137 on:** September 15, 2012, 11:12:13 AM »

pic 2

Music City Metalcraft · « **Reply #138 on:** September 15, 2012, 11:12:52 AM »

pic 3

Red Good · « **Reply #139 on:** September 16, 2012, 03:37:03 PM »

Fang , if your looking for his pistons and find more of the same I need 3 complete , Haindst 900 same as his picture . Used is fine , rings and pins would be wonderful . Let me know if you have anything . Thanks ,Red

Or even a full used set if I had to .

Jerry Rxman Griffin aka MuthaF'er · « **Reply #140 on:** September 18, 2012, 12:19:15 AM »

Red,

If you need to order rings I can give you Total Seal part numbers. I have the other style HA kit with the different shaped pistons but I'd bet the rings are all the same, just check land thicknesses. 3 piece oil rings.

JLeather · « **Reply #141 on:** September 18, 2012, 08:14:17 AM »

A quick note to anyone who haunts the Hi-Po section exclusively. I listed a very nice CB750 turbo kit and a set of custom made turbo pistons in the regular classifieds. Link is http://forums.sohc4.net/index.php?topic=112877.0

fang · « **Reply #142 on:** September 18, 2012, 02:10:05 PM »

I'd sweat I posted this several days ago... I must have forgot to click send or something....

I have the slipper-style pistons:

(Thanks Sataic Mechanic for the pic. RIP.

If I remember correctly, I think I have two or three loose pistons, plus one lightly damaged one, plus rings.
-fang