« previous next »
Pages: [1]   Go Down

Author Topic: Bent rear brake arm  (Read 1734 times)

0 Members and 1 Guest are viewing this topic.

Offline qw3rtie

  • Full Member
  • *
  • Posts: 38
Bent rear brake arm
« on: March 01, 2012, 02:09:31 PM »
Hi everybody, i am the new owner of a 1975 cb550f. Its in decent condition. ran when i bought it though the battery is dead now.


My biggest problem though is the rear brake. After i bought it and brought it home i wanted to ride it. So im pulling out of my driveway which is downhill so i start braking a little and feel this weird resistance then hear a very unpleasant sound. i look down and see that the rear brake rod which is connected to the pivot attached to the brake pedal snapped off because the PO had forgotten to put a nut on the rear brake stopper arm when reassembling the bike



also my parts manual is a little blurry, can anyone clarify that the hex nut size is 9mm?

as a result the rear brake rod looks like this



and the rear brake arm looks like this




i have since ordered a new brake pivot and rear brake rod but im wondering if its possible to fix the rear brake arm without making it weaker. or if i should, if i can find one, buy a used one. any help is appreciated. Thanks
« Last Edit: March 01, 2012, 04:09:40 PM by qw3rtie »
Logged

Offline qw3rtie

  • Full Member
  • *
  • Posts: 38
Re: Bent rear arm brake
« Reply #1 on: March 01, 2012, 02:41:13 PM »
Logged

Offline Don R

  • My Sandcast is a
  • Really Old Timer ...
  • *******
  • Posts: 19,843
  • Saver of unloved motorcycles.
Re: Bent rear arm brake
« Reply #2 on: March 01, 2012, 02:47:17 PM »
 It might be good to do a nut and bolt check if you haven't already. It's scary to trust someone else with your life.
Logged
No matter how many times you paint over a shadow, it's still there.
 CEO at the no kill motorcycle shop.
 You don't need a weatherman to know which way the wind blows.

Offline qw3rtie

  • Full Member
  • *
  • Posts: 38
Re: Bent rear arm brake
« Reply #3 on: March 01, 2012, 02:55:13 PM »
Quote from: Don R on March 01, 2012, 02:47:17 PM
It might be good to do a nut and bolt check if you haven't already. It's scary to trust someone else with your life.

thank you i will. im new to bikes and have pretty much no mechanical experience so any advice is great.
Logged

Offline LesterPiglet

  • Old Timer
  • ******
  • Posts: 4,046
  • 1977 CB550F2
Re: Bent rear brake arm
« Reply #4 on: March 01, 2012, 05:17:46 PM »
Being cheap as I am I would hit that with a hammer and straighten it. Gonna take a lotta force to break that.
I also made my own brake rod from a brass bar. It ain't gonna break.
« Last Edit: March 01, 2012, 05:19:34 PM by LesterPiglet »
Logged
'Then' and 'than' are completely different words and have completely different meanings. Same with 'of' and 'have'. Set and sit. There, their and they're. Draw and drawer. Could care less/couldn't care less. Bought/brought FFS.


Les Ross.            Certified by a Professional

Offline qw3rtie

  • Full Member
  • *
  • Posts: 38
Re: Bent rear brake arm
« Reply #5 on: March 02, 2012, 07:52:44 AM »
yeah i tried a hammer but was getting nervous about hitting it too hard though youre right, its steel. it can take a beating. and even if i break it its not like im losing a working part
Logged

Offline srbakker

  • Spam & Eggs
  • Hot Shot
  • ***
  • Posts: 550
Re: Bent rear brake arm
« Reply #6 on: March 02, 2012, 08:07:15 PM »
Find a spare in a local junkyard or Fleabay - not sure I'd trust that thing.
Logged
1975 CB750 K5
2007 Triumph Tiger
2007 Triumph Speed Triple
1971 Kawasaki F7 175 Enduro
2000 Honda VFR800 (gone but not forgotten)
Pages: [1]   Go Up
« previous next »