Author Topic: cb750 woodgrain cafe racer #2 complete 2/21/17 (Read 17322 times)

Restoration Fan · « **Reply #50 on:** October 03, 2015, 03:15:11 AM »

Quote from: FGKouki on October 02, 2015, 07:24:26 PM

Thanks buddy. So I've decided to hydrodip the tank and tail section. I dip everything outside and the weather will not let up at the moment!

Cool. I considered doing a carbon graphite looking hydrodrip on one of the cafe bikes. I'm looking forward to seeing your tank and tail section after it's dipped.

Ron

FGKouki · « **Reply #51 on:** October 08, 2015, 10:18:04 AM »

I dipped the parts the other day and at first I didn't care for the look as the film was too transparent and the gold base was showing through too much. Before I cleared the parts I decided to hit it with a few coats of tropic orange candy first. After that I'm real happy with it as it's sort of a compromise between the wood and what I was contemplating doing before with standard orange candy/black/white graphics. I'm going to wetsand the parts now in preparation for the graphics. To keep it simple I will do white stripes down the tank and tail with a broad center stripe and two pinstripes on either side. I have some RM crystal base green pearl I may throw over top of the stripes too! Plain white is, well, plain!

RandyBMC · « **Reply #52 on:** October 08, 2015, 10:28:34 AM »

I like the way it looks - will look slick with the graphics.

FGKouki · « **Reply #53 on:** October 11, 2015, 12:12:24 PM »

Paint is all finished up!

spray booth until my real booth is finished (shop about 90% now!)

4 coats of clear down and sanded

the pearl is a little more subtle than I hoped, but I'm happy.

RandyBMC · « **Reply #54 on:** October 11, 2015, 12:47:02 PM »

Looks great! The orange really made it pop. Congrats.

AintNoEasyWay · « **Reply #55 on:** October 14, 2015, 05:02:11 PM »

Wow. I'm blown away. This is just awesome!

FGKouki · « **Reply #56 on:** October 22, 2015, 08:32:55 PM »

The exhaust head pipe I had was in pretty rough shape. After everything else was back on the bike i felt it would really let it down to put that thing back on there.

I picked up a near mint ceramic coated head pipe, I believe mac 4-1 from a very cool local guy that's big into gs750 and 1100 suzukis. I honestly don't know what the old pipe is, I don't care for it as it uses the factory collars instead of rotate-able flanges. This one should do good even though it's not brand new.

My failed attempt at a seat cushion cover. I'm having a friend who's a very talented saddle maker and upholsterer make one for me this weekend.

it's alive! I haven't messed with the idle screws or anything yet but she sounds pretty good already. I put a stainless magnaflow exhaust tip on the end to finish it off a bit. Mufflers just quiet down that beautiful sound too much

oldhatt45 · « **Reply #57 on:** October 23, 2015, 04:47:19 AM »

FGKouki,

I really like the way the Bodywork came out. Very Talented indeed!

And the Bike sounds GREAT!

Nice Job.

Charlie

Restoration Fan · « **Reply #58 on:** October 23, 2015, 05:26:04 AM »

I love the way the wood look came out. And you're right, she does sound pretty good right off the bat. Congrats on a job well done!

Desert-SOHC · « **Reply #59 on:** October 23, 2015, 10:45:32 AM »

Nice finish....the bolts in the seat pan would kill me

FGKouki · « **Reply #60 on:** October 23, 2015, 11:39:10 AM »

Thanks fellas. The seat will get a nice comfy cushion here shortly. had some fuel leaks after letting it sit overnight- bad petcock and carb bowl gaskets so I have some on order.

calj737 · « **Reply #61 on:** October 23, 2015, 01:11:47 PM »

Can't tell if they're cap head or hex head. Either way. Use some button head and solve that problem...

FGKouki · « **Reply #62 on:** October 23, 2015, 01:22:36 PM »

They're studs welded to the top of the frame, so standard flanged nuts. They recess into the bottom of the seat cushion.

The base is now foamed up with some high density closed cell saddle pad foam (1") and 1" of open cell top cushion foam. I will try to grab a picture of it with just the foam before the vinyl cover is stretched and riveted on. The cushion will just velcro on to the painted rear cowl.

RandyBMC · « **Reply #63 on:** October 23, 2015, 02:58:51 PM »

Awesome - that sounds great, and first kick too! I can't wait to get to that point...

Salman_z8 · « **Reply #64 on:** October 26, 2015, 08:49:34 PM »

absolutely gorgeous

FGKouki · « **Reply #65 on:** November 03, 2015, 02:11:30 PM »

I have a new seat cushion foamed up and covered. Here are some pics set on the bike- once it's velcro'd on it should be a tighter fit.

New carb bowl gaskets were no good and leaking like a sieve so I'm trying to source some more that are actually rubber instead of stamped gasket sheet.

RandyBMC · « **Reply #66 on:** November 03, 2015, 04:06:42 PM »

Seat is looking good! Carbs are on my list to do - let me know if you find a good gasket source.

unamusedd · « **Reply #67 on:** November 09, 2015, 10:46:26 PM »

Wow this is a beautiful bike and great inspiration for mine.

FGKouki · « **Reply #68 on:** November 10, 2015, 01:26:59 PM »

Thanks guys. Hope to have time this weekend to put the new 4into1 bowl gaskets on and take her for a tuning ride.

FGKouki · « **Reply #69 on:** April 25, 2016, 07:51:19 PM »

I haven't updated my build in a while but since my last post I haven't don a whole lot. The bike is complete at this point and I'm working out bugs. This past weekend I i refurb'd the forks.

copper washers were in really bad shape and leaking. The previous owner thought it would be a good idea to seal them with rtv

anyhow I wetsanded them with 220 and 400 grit paper and they're sealing perfectly now

they were pretty well full of gunk

FGKouki · « **Reply #70 on:** February 21, 2017, 09:00:12 AM »

I know it's almost a year later, but the bike is finally finished. Have taken it out on some test and tune and break in rides. Pulls really hard, great sound, stops great too. Here are a few pics