Author Topic: I need some opinions....  (Read 2220 times)

0 Members and 2 Guests are viewing this topic.

Offline MRieck

  • Really Old Timer ...
  • *******
  • Posts: 10,561
  • Big ideas....
I need some opinions....
« on: March 27, 2009, 07:21:17 PM »
 I received this cylinder today from eBay. The way you see it is the way it was sitting on my doorstep. The seller is adamant it was well packaged. Christ...the locating dowel punched a hole through 2 pieces of cardboard. The box is soft as a grape and you can see where the mail service put Priority tape on a corner to keep it from exploding. It didn't help much.
  The seller says he has another cylinder he can send me. I said no interested as it will shipped in the same manner. I want my money back.
  A buddy of mine bought a set of VW rods off a guy in Puerto Rico a couple of years back. The idiot puts 4 rods in a box with NO PACKING and sends them to Massachusetts. Geez.....can you guess what they looked like when they arrived?? ::) My friend tears the guy a new one on the board he found them on and the seller had the balls to threaten him with all sorts of stupid retaliatory crap. Some people are so stupid and/or just aholes. ::) ::)
Owner of the "Million Dollar CB"

Offline MRieck

  • Really Old Timer ...
  • *******
  • Posts: 10,561
  • Big ideas....
Re: I need some opinions....
« Reply #1 on: March 27, 2009, 07:22:55 PM »
A few more....
Owner of the "Million Dollar CB"

Offline MRieck

  • Really Old Timer ...
  • *******
  • Posts: 10,561
  • Big ideas....
Re: I need some opinions....
« Reply #2 on: March 27, 2009, 07:24:19 PM »
 Oh yeah....he's blaming the US Mail service on being "Ham Fisted". I'm sure they will accuse him of being "Retarded". ;)
Owner of the "Million Dollar CB"

fuzzybutt

  • Guest
Re: I need some opinions....
« Reply #3 on: March 27, 2009, 07:27:31 PM »
oh man, theres NO reason at all that stuff should be packed that way. how blooming hard is it to properly pack something so it doesnt get broken.

masonryman

  • Guest
Re: I need some opinions....
« Reply #4 on: March 27, 2009, 07:55:32 PM »
I think I would return that even if it meant losing the shipping both ways

JMO

Mark

Offline CBJoe

  • Master
  • *****
  • Posts: 1,975
Re: I need some opinions....
« Reply #5 on: March 27, 2009, 07:56:09 PM »
No excuse....   money back for sure.  If not, then post the seller ID so that I don't waste any business on him.

Joe
'07 Bonneville Black
'15 Moto Guzzi California 1400
CB750K2 Hot Rod Revival http://forums.sohc4.net/index.php/topic,171693.0.html
'65 CB77
'66 CM91 (C90'ish)

Offline Johnie

  • Really Old Timer ...
  • *******
  • Posts: 8,606
Re: I need some opinions....
« Reply #6 on: March 27, 2009, 07:56:53 PM »
Yah, keep those pics you may be sending them to PayPal to get your money back. That is if you did use PayPal.
1970 CB750K0 - Candy Ruby Red
1973 CB750K3 - Candy Bacchus Olive or Sunflake Orange
1970 Chevy Chevelle SS396 - Cortez Silver
1976 GL1000 Sulphur Yellow

Oshkosh, WI  USA

Offline bwaller

  • Really Old Timer ...
  • *******
  • Posts: 7,484
Re: I need some opinions....
« Reply #7 on: March 27, 2009, 07:58:28 PM »
I wonder how often this happens. Likely the seller moves a lot of stuff and just rushes the packaging.

Tis a shame. What a waste.

Offline 754

  • Really Old Timer ...
  • *******
  • Posts: 29,058
Re: I need some opinions....
« Reply #8 on: March 27, 2009, 08:00:17 PM »
I hope fish took a pic of the carbs i sent him..

 I pack as if it will be dropped and it will.. it always takes WAY  too long but I am happy when the buyer appreciates it.

 Pack it like you would like to get it.

A few years back I got a rt side switch  housing and wires for 750.. guy threw it in a priority bag with nothing around it to ship to Canada.. it was ripped up a bit when it got here. I complained and he said you are lucky you got it so cheap, think it was 15 bux, and probly same to ship. I told him , i could not even tell if the kill switch was black or red in the pic, and you wonder why you dont get bids.. i think on the feedback I said worst packing I have seen..

Sellers that cant be bothered to pack right are a pita.. put his name on the bad folks.. list..
Maker of the WELDLESS 750 Frame Kit
dodogas99@gmail.com
Kelowna B.C.       Canada

My next bike will be a ..ANFOB.....

It's All part of the ADVENTURE...

73 836cc.. Green, had it for 3 decades!!
Lost quite a few CB 750's along the way

Offline mcuozzo

  • Hot Shot
  • ***
  • Posts: 311
  • Bottle in front of me or frontal labotomy?
    • 77 CB750K - needs total rebuild
Re: I need some opinions....
« Reply #9 on: March 27, 2009, 08:00:45 PM »
The biggest thing when shipping stuff like this is that there needs to be no room for the stuff to move around.  It's the weight of the item shifting in the box itself that causes this.  What was once a sturdy box becomes 'soft as a grape' when a 30 lb item with sharp edges is bounced around inside it about 100 times.

I had somebody send me axle half\shafts. By the time it got to me one of them was completely out of the box!!!

Good luck getting your money back...



Offline Alan F.

  • We remember the Night Rider, and we know who you are.
  • Really Old Timer ...
  • *******
  • Posts: 7,343
Re: I need some opinions....
« Reply #10 on: March 27, 2009, 08:08:01 PM »
In a past life I was a shipper, we moved lots of pricey stuff.  When I sent my swingarm out it got bubblewraped and double boxed with more bubblewrap, I guess it survived the MA to CO run with the fedex boys... double box is the key.

Sorry to hear it Mike, what a waste of a perfectly good part too.

Offline MRieck

  • Really Old Timer ...
  • *******
  • Posts: 10,561
  • Big ideas....
Re: I need some opinions....
« Reply #11 on: March 27, 2009, 08:08:02 PM »
I wonder how often this happens. Likely the seller moves a lot of stuff and just rushes the packaging.

Tis a shame. What a waste.
I think it's the "waste" part that really gets to me Brent. A perfectly good cylinder completely ruined secondary to ineptness.  ::)
Owner of the "Million Dollar CB"

Offline 754

  • Really Old Timer ...
  • *******
  • Posts: 29,058
Re: I need some opinions....
« Reply #12 on: March 27, 2009, 08:10:44 PM »
Well you still got sleeves (I hope) and donor fins..

 cant see taking fins of a good one to do a repair..
Maker of the WELDLESS 750 Frame Kit
dodogas99@gmail.com
Kelowna B.C.       Canada

My next bike will be a ..ANFOB.....

It's All part of the ADVENTURE...

73 836cc.. Green, had it for 3 decades!!
Lost quite a few CB 750's along the way

Offline FunJimmy

  • Who you calling
  • Old Timer
  • ******
  • Posts: 3,802
  • Vancouver
Re: I need some opinions....
« Reply #13 on: March 27, 2009, 08:11:22 PM »
There shouldn't be a problem getting your money back for Paypal for product like that.
They are pretty good about protecting the purchaser over the seller.

FJ
You never see a motorcycle parked outside of a psychiatrist's office!

CB550 Cafe Interceptor a Gentlemans Roadster
http://forums.sohc4.net/index.php?topic=27159.0

Offline Gordon

  • Global Moderator
  • Really Old Timer ...
  • *****
  • Posts: 12,114
  • 750K1, 550K2
Re: I need some opinions....
« Reply #14 on: March 27, 2009, 08:14:13 PM »
So what are you looking for opinions on?  

You paid for the merchandise, and it arrived to you damaged.  It doesn't matter whether it was damaged before or during shipment, it's the seller's responsibility to deliver the item to you in the condition it was stated at the time of sale.  Even if there's a shipping insurance claim involved, it's there to protect the seller, not the buyer.  You have the right to a full refund.  If the transaction was done through paypal, then you will get the total, including shipping, refunded to you.  Unfortunately, unless the seller decides to pay for return shipment on his own, you will be stuck with that cost, but maybe the possibility of getting a negative feedback for this will motivate him to be as accommodating as possible.  

fuzzybutt

  • Guest
Re: I need some opinions....
« Reply #15 on: March 27, 2009, 08:15:05 PM »
dont suppose it was iamachoppahead? same exact thing happened to me when i got a spare set of carbs from him last year

Offline MRieck

  • Really Old Timer ...
  • *******
  • Posts: 10,561
  • Big ideas....
Re: I need some opinions....
« Reply #16 on: March 27, 2009, 08:38:29 PM »
dont suppose it was iamachoppahead? same exact thing happened to me when i got a spare set of carbs from him last year
It wasn't him fuzz.
Owner of the "Million Dollar CB"

Offline motorhead55

  • Enthusiast
  • **
  • Posts: 101
Re: I need some opinions....
« Reply #17 on: March 27, 2009, 08:51:04 PM »
I worked at UPS for thirty years and saw alot of "JARHEADED" packaging! The shipper should have used a NEW box and lots of support to protect the fins. Last summer, I shipped a NOS Okrasa kit for the old 36hp VW engine. I shipped it with a bunch of heavy cylinders and engine case to FRANCE! The parts were NON replaceable vintage hop-up parts that I sold to the guy for $16,700., so I packed them well. I shipped them UPS and they arrived in FRANCE unscathed!
1976 Honda 550F bought new in 1978
2006 Yamaha TW200 TrailWay
1967 Triumph 200cc Tiger Cub
2007 Dodge 5.9 Cummins Diesel, 6spd. Stick, 4X4
1955 European Spec VW Bug, 1700cc engine, Porsche 356 "A" brakes
1939 Willys Pickup
2003 Kubota B7400