Author Topic: who's bike is this? (Read 4111 times)

slowjo · « **on:** January 07, 2011, 06:26:57 AM »

Can some one tell me who's bike is this. And is there a thread to the build. Thanks.

Loki047 · « **Reply #1 on:** January 07, 2011, 03:02:45 PM »

Joining in

ksmith0034 · « **Reply #2 on:** January 08, 2011, 07:30:34 AM »

I don't think that's a SOHC4 is it?

evan77 · « **Reply #3 on:** January 08, 2011, 07:50:07 AM »

i can't tell the op whose bike it is but i can say it does have one cam and four cylinders.
hence: sohc4. i am no expert but i believe it might be a cb550. i'm sure someone will correct me if i'm wrong.

fastbroshi · « **Reply #4 on:** January 08, 2011, 08:03:10 AM »

It's a CB550. They chopped the tail, added a drum front, new wheels. Not sure what tank that's from though. Very nice bike. That's the only pic I've seen of it. Must be in Europe somewhere, judging by the neighborhood.

kyre · « **Reply #5 on:** January 08, 2011, 09:54:46 AM »

seat and handlebars, not too into, but damn those pipes are nice

Flying J · « **Reply #6 on:** January 08, 2011, 10:11:54 AM »

Its been asked before and i dont think anybody found out whos it was. I think it was sombody in germany.
http://forums.sohc4.net/index.php?topic=32693.msg830229#msg830229

Raef · « **Reply #7 on:** January 08, 2011, 10:21:20 AM »

I seen a thread on here somewhere on building a set of pipes just like them.

d3buttz · « **Reply #8 on:** January 10, 2011, 04:41:01 PM »

try searching inthe EURO/UK sohc forum

slowjo · « **Reply #9 on:** January 10, 2011, 04:52:56 PM »

There is a seller on eBay who sells the pipes. I would like to know more about that bike. I was deleting photos from my computer and this one caught my eye again. I really like it.

wannabridin · « **Reply #10 on:** January 10, 2011, 07:54:07 PM »

Those are swarbrick pipes. "The Pepsi Racer" build thread used them on his 750. Unreal sound, unreal amount of work to make them fit properly tho.

Im on my phone, so its tough to copy-paste the link, so just look through the projects threads

Bluegreen · « **Reply #11 on:** January 10, 2011, 10:32:50 PM »

Quote from: kyre on January 08, 2011, 09:54:46 AM

seat and handlebars, not too into, but damn those pipes are nice

+1

I want those pipes!

Flying J · « **Reply #12 on:** January 11, 2011, 11:48:59 AM »

Quote from: wannabINDUSTRIdin on January 10, 2011, 07:54:07 PM

Those are swarbrick pipes. "The Pepsi Racer" build thread used them on his 750. Unreal sound, unreal amount of work to make them fit properly tho.

Im on my phone, so its tough to copy-paste the link, so just look through the projects threads

TinTop used swarbricks as well. PIA

srook · « **Reply #13 on:** January 11, 2011, 01:33:52 PM »

Those aren't Swarbrick pipes. They are made for Classic City Cycles

http://cgi.ebay.com/ebaymotors/Honda-CB750-SOHC-Magni-style-Cafe-Racer-Exhaust-_W0QQcmdZViewItemQQhashZitem3f0511ad41QQitemZ270667984193QQptZMotorcyclesQ5fPartsQ5fAccessories

Quite pricey for slip ons but if you gotta have them.....

Scott

wannabridin · « **Reply #14 on:** January 12, 2011, 01:18:17 PM »

Ah, thanks for the correction! Sexy pipes nonetheless

Ricky_Racer · « **Reply #15 on:** January 12, 2011, 06:23:11 PM »

Thanks for the CCC plug, srook, but those 500/550 pipes actually are made by Swarbrick. I'm considering a set for a CB500/650 cafe bike; I understand that they are much easier to fit than the miserable Swarbrick CB750 meggas. The Swarbrick CB750 exhaust can cost as much to fit as the price of the exhaust.

RR

Tintop · « **Reply #16 on:** January 12, 2011, 07:01:58 PM »

Quote from: wannabINDUSTRIdin on January 10, 2011, 07:54:07 PM

Those are swarbrick pipes. "The Pepsi Racer" build thread used them on his 750. Unreal sound, unreal amount of work to make them fit properly tho.

Im on my phone, so its tough to copy-paste the link, so just look through the projects threads

Those aren't Swarbricks. They are like the ones used on the MV's, and I think Ricky Racer was trying to get some made.

Ricky_Racer · « **Reply #17 on:** January 13, 2011, 11:13:38 AM »

TT, Swarbrick actually does list both silenced and unsilenced curved CB500 meggas on their site. You'll find them noted on http://www.swarbrick-racing.co.uk/prices.html. I assume one would need their CB500 downtubes as well, but beyond that I have no idea of the difficulty of fitment. It has to be easier than the CR750 megga nightmare.

Another website that needs much attention! RR

Bluegreen · « **Reply #18 on:** January 14, 2011, 12:22:54 AM »

I wish there was a non-MAC 4-1 option for these bikes. Something that came in at a reasonable price, performed and looked good.

Tintop · « **Reply #19 on:** January 14, 2011, 03:24:35 PM »

Quote from: Ricky_Racer on January 13, 2011, 11:13:38 AM

TT, Swarbrick actually does list both silenced and unsilenced curved CB500 meggas on their site. You'll find them noted on http://www.swarbrick-racing.co.uk/prices.html. I assume one would need their CB500 downtubes as well, but beyond that I have no idea of the difficulty of fitment. It has to be easier than the CR750 megga nightmare.

Another website that needs much attention! RR

Actually RR, the pipes on my 550 are the Swarbrick 'bent' 500's, and they are just as much a PITA to fit as the 750's.

The 'double bend' Swarbricks are the ones he makes for the twins (350 / 450 / 500). tt

Ricky_Racer · « **Reply #20 on:** January 15, 2011, 09:40:00 AM »

Quote from: Tintop on January 14, 2011, 03:24:35 PM

Actually RR, the pipes on my 550 are the Swarbrick 'bent' 500's, and they are just as much a PITA to fit as the 750's. tt

TT, that's the info I was trying to find. Looks like I'm going to have to look at "home grown" pipes or modded '77-'78 CB550 stockers. After all these years, you'd think a company as experienced as Swarbrick could make an easily fittable product. (sigh) Another area of opportunity! RR

Owned · « **Reply #21 on:** January 17, 2011, 01:15:20 PM »

Quote from: Tintop on January 12, 2011, 07:01:58 PM

Quote from: wannabINDUSTRIdin on January 10, 2011, 07:54:07 PM
Those are swarbrick pipes. "The Pepsi Racer" build thread used them on his 750. Unreal sound, unreal amount of work to make them fit properly tho.

Im on my phone, so its tough to copy-paste the link, so just look through the projects threads

Those aren't Swarbricks. They are like the ones used on the MV's, and I think Ricky Racer was trying to get some made.

TinTop's correct. They aren't Swarbricks. Emailed him to ask and they are not his.

News:

Author Topic: who's bike is this? (Read 4111 times)

srook