« previous next »
Pages: [1]   Go Down

Author Topic: master cylinder - alternatives or aftermarket  (Read 1436 times)

0 Members and 1 Guest are viewing this topic.

Offline ben.cb500

  • Enthusiast
  • **
  • Posts: 143
master cylinder - alternatives or aftermarket
« on: June 21, 2012, 10:28:57 AM »
After countless rebuilds of various oem master cylinders, i am ready to move on...

My cb500 has clubmans, mc is tight to the clocks...

Anyone suggest a model? Perhaps david silvers repro? Although i find the rebuild kits for oem very poor might want to avoid that model...


Thanks
Logged

Offline LesterPiglet

  • Old Timer
  • ******
  • Posts: 4,045
  • 1977 CB550F2
Re: master cylinder - alternatives or aftermarket
« Reply #1 on: June 21, 2012, 10:58:49 AM »
I've just got the repro from DSS. Works perfectly well. The only difference is its all metal.
Logged
'Then' and 'than' are completely different words and have completely different meanings. Same with 'of' and 'have'. Set and sit. There, their and they're. Draw and drawer. Could care less/couldn't care less. Bought/brought FFS.


Les Ross.            Certified by a Professional

Offline MCRider

  • Such is the life of a
  • Really Old Timer ...
  • *******
  • Posts: 14,370
  • Today's Lesson: One good turn deserves another.
Re: master cylinder - alternatives or aftermarket
« Reply #2 on: June 21, 2012, 11:01:23 AM »
An MC with the hose on the front helped me with the problem of being close to the tach.  VF500F or the ilk will do it.
Logged
Ride Safe:
Ron
1988 NT650 HawkGT;  1978 CB400 Hawk;  1975 CB750F -Free Bird; 1968 CB77 Super Hawk -Ticker;  Phaedrus 1972 CB750K2- Build Thread
"Sometimes the light's all shining on me, other times I can barely see, lately it appears to me, what a long, strange trip its been."

Offline ben.cb500

  • Enthusiast
  • **
  • Posts: 143
Re: master cylinder - alternatives or aftermarket
« Reply #3 on: June 23, 2012, 11:54:34 AM »
Thanks for the replys...

RE: DSS Repro, all metal? As opposed to the original?....Is it any short (length across bar) than the stock mc and what rebuild kit would you use for it?

What about one of theses?

http://www.ebay.com/itm/Front-Brake-Master-Cylinder-for-Honda-CB400-92-98-New-/271001803489?pt=Motorcycles_Parts_Accessories&hash=item3f18f75ae1&vxp=mtr

or is this different?

http://www.ebay.com/itm/NEW-FRONT-BRAKE-MASTER-CYLINDER-LEVER-HONDA-CB750-CB750A-CB750K-CB750F-CMX250-/110900175886?pt=Motorcycles_Parts_Accessories&hash=item19d22a640e&vxp=mtr
Logged

Offline LesterPiglet

  • Old Timer
  • ******
  • Posts: 4,045
  • 1977 CB550F2
Re: master cylinder - alternatives or aftermarket
« Reply #4 on: June 23, 2012, 01:56:20 PM »
The DSS is an exact copy of the original except the fluid reservoir is metal. The original Honda is a white plastic.
Logged
'Then' and 'than' are completely different words and have completely different meanings. Same with 'of' and 'have'. Set and sit. There, their and they're. Draw and drawer. Could care less/couldn't care less. Bought/brought FFS.


Les Ross.            Certified by a Professional
Pages: [1]   Go Up
« previous next »