Author Topic: To cold to work on the bike  (Read 2326 times)

0 Members and 1 Guest are viewing this topic.

Offline Magilla

  • Expert
  • ****
  • Posts: 764
  • My bike: 1976 CB750F
To cold to work on the bike
« on: January 11, 2013, 05:07:47 AM »
Here is Mass it's to cold to work on my bike while it is out in the shed.  Anyone on here ever add heat to a shed?  If so what did you do and how did it work out?

Electric heat is out of the question.  Our electrical rate in my town is in the top ten highest in the country.
1972   Honda CB350
1972   Yamaha 500
1982   Yamaha 650
1988   Harley Sportster 883
1983   HD FXR Shovelhead
2003   HD Heritage Softail
2006   Victory Vegas Jackpot
1980   Honda CB650
1976   Honda CB750K
1982   Honda CB750
1964   Honda CA95
1982   Kawasaki 550
1974   Honda CL360
1975   Suzuki GT550
1981   Honda CB750
1981   Honda CB750
1970   Norton Commando
1972   Yamaha U7E
1970   BMW R50/5
1976   Honda CB750F

Offline harisuluv

  • Master
  • *****
  • Posts: 2,009
Re: To cold to work on the bike
« Reply #1 on: January 11, 2013, 05:18:58 AM »
Get one of those propane heaters like they have for outdoor seating at restaurants. 

Offline KRONUS0100

  • MAD MATT THE MANIAC
  • Expert
  • ****
  • Posts: 1,216
Re: To cold to work on the bike
« Reply #2 on: January 11, 2013, 05:38:23 AM »
cold in mine as well, only got about 1/4 of it insulated with the 2" pink stuff.  i got out for about an hour at a time about every other day.
MATT
current bikes:  1976 CB750F, 1981 GS1100E
bikes owned:1981 GL1100I, 1990 GS500E, 1981 GS850, 1977 and 1979 GS750, 1974 CB750, 1975 CB750, and a 1982 GS750E

Offline Franky

  • Enthusiast
  • **
  • Posts: 174
Re: To cold to work on the bike
« Reply #3 on: January 11, 2013, 05:53:19 AM »
I have 10-15 cm (4-6 inches) of insulation and two-layer windows in my HUGE 10 m2 (118 sq feet) shed - all stuff I picked up for free when people would tear down old houses.

I only need to fart a few times, and the insulation does the job of retaining the heat :) Well, OK, I also have a small wood stove (also an old beater I got for free). A few sticks in there and I'm toasty :)
1974 Honda CB360T Stock
1974 Honda CB550 K0 Stock
1977 Honda CB550 K3 Cafe - never ending build :)
1988 Honda Dax ST50 Cafe
1997 Honda Benly 50S Stock

Check out my "Yamaha R6 fork on a CB550 made easy" thread:
http://forums.sohc4.net/index.php?topic=118983.0;all

Offline fmctm1sw

  • Old Timer
  • ******
  • Posts: 3,042
Re: To cold to work on the bike
« Reply #4 on: January 11, 2013, 06:44:33 AM »
I'm sure you know this but if you're going to use a gas type heater, make sure to keep the shed well ventilated.
Quote from: 754
Dude is that a tire ? or an O-ring..??

Quote from: inkscars
This is not a pod thread
This is not a #$%* on my vacuum gauges thread
This is a help or GTFO thread.

1973 CB350F
1973 CB350G
1975 CB550K
1983 GL650I
1973 CB750K3 (http://forums.sohc4.net/index.php?topic=92888.0)
1984 Kawasaki KLT-250 (AKA 3 wheeler of death)
1994 Honda TRX300
1999 Honda TRX250

Offline IndyFour

  • Hot Shot
  • ***
  • Posts: 601
Re: To cold to work on the bike
« Reply #5 on: January 11, 2013, 06:47:22 AM »
I know it uses electricity, but not for the actual heating....I use a smaller sized salamander/torpedo style heater in my garage and can work in there during the winter with no problem.  Many of them can run multiple fuels....I use Diesel in mine because it's significantly cheaper than kerosene.  You just have to watch that you are letting in some fresh air as the exhaust can get to you after a while in a closed space.  That's the case with any type of combustion heat, though.
1974 CB550K
2000 VFR800FIY
__________________
Indianapolis, Indiana

Offline d3buttz

  • More than just an
  • Hot Shot
  • ***
  • Posts: 290
Re: To cold to work on the bike
« Reply #6 on: January 11, 2013, 07:45:18 AM »
I have carhart cold weather overalls that my
Girl gave me for Christmas. It's awesome. I live in Denver
And I work in the garage( no heat) past sundown. Best
Gift ever. They retain so much body heat on my legs and
Torso all I wear is a sweatshirt and a beanie with it
And I'm not even  cold in 35degree weather. Great for cold riding too!
http://forums.sohc4.net/index.php?topic=80508.0

1975 cb750f
1975 cb550k
1972 cb350k
1974 tl125
1996 Nissan pathfinder
1972 Datsun 240z
2002 Nissan sentra se-r spec-v

Offline 1BadCB750

  • Full Member
  • *
  • Posts: 90
Re: To cold to work on the bike
« Reply #7 on: January 11, 2013, 11:10:56 AM »
I use a dual burner propane heater on my garage. Only ever need 1 burner going, and I have a small fan going to help circulate the heat. Lasts 2-3 weeks on low, and $14 to refill. The other option which can be cheap but requires you cutting a hole for a chimney, is a DIY ammo-can wood stove.

Offline andrewk

  • doin' it.
  • Hot Shot
  • ***
  • Posts: 626
Re: To cold to work on the bike
« Reply #8 on: January 11, 2013, 01:55:57 PM »
I use a propane salamander to heat my *poorly insulated* single car garage.  I can get about 2 or 3 days worth of work done on a 20lb propane cylinder- gotta cycle it on and off though.

Offline azuredesign

  • Knupping pin
  • Master
  • *****
  • Posts: 1,705
Re: To cold to work on the bike
« Reply #9 on: January 11, 2013, 02:22:53 PM »
My sons studio, which is really a shed on the back of our garage is unheated, but Nick found one of those radiant electric  jobs that were popular at the dump, and the darn thing works pretty well. We are in MA too, and even though its been relatively warm this week, the heater has allowed Nick to work even when the outside temp is in the teens.

Offline flybox1

  • My wife thinks I'm a
  • Really Old Timer ...
  • *******
  • Posts: 14,289
Re: To cold to work on the bike
« Reply #10 on: January 11, 2013, 02:50:25 PM »
you guys burning propane really should put a pot of corn, barley, and sugar over the flame  8) ;D
'78 750K (F3 engine) PD42b's, Modified airbox w/K&N  filter, 40/110 jets, 1 needle shim, IMS@ 1 turn out. Kerker + Cone 18" QuietCore

Past Bikes
1974 550K0 (stock), 1973 CB350F (stock), 1983 Yamaha XS400K (POS)
77/78 cool 2 member #3
"Knowledge without mileage equals bullsh!t" - Henry Rollins

"This is my CB. There are many like it, but this one is mineā€¦"

Offline Retro Rocket

  • Eggs are hard due too a
  • Really Old Timer ...
  • *******
  • Posts: 19,235
  • ROCK & ROLL
Re: To cold to work on the bike
« Reply #11 on: January 11, 2013, 03:26:56 PM »
you guys burning propane really should put a pot of corn, barley, and sugar over the flame  8) ;D

I think they are trying to get more work done mate, not less.... ;D
750 K2 1000cc
750 F1 970cc
750 Bitsa 900cc
If You can't fix it with a hammer, You've got an electrical problem.

Offline jamesb

  • Expert
  • ****
  • Posts: 1,167
Re: To cold to work on the bike
« Reply #12 on: January 11, 2013, 05:12:51 PM »
Propane heater works great actually getting a refill tomorrow on mine so my son can finish a couple paint jobs for me the shop is insulated so it doesn't take much to heat up.
I've done a lot of things in my life that I'm not proud of...and the things I AM proud of, "are disgusting"

Offline cougar

  • Hot Shot
  • ***
  • Posts: 409
  • Stamping Ground, Kentucky U.S.A.
Re: To cold to work on the bike
« Reply #13 on: January 12, 2013, 03:16:28 PM »
Magilla ; For your sake and ours (sorta) if you use any type of heater that Burns something, Please get a carbon-monoxide detector. There like a smoke detector just warn you if the carbon-monoxide gets to high. This is a gas that you WON'T notice till it's to late. All my statements may not be perfect, but you get the idea !   ...cougar...
I'm not prejudice, I'll weld anything that pays! Knowledge that is shared is Never Lost!!   Right is right, wrong is wrong! The truth is the truth and a lie is a lie! DEAL WITH IT ACCORDINGLY !!!   I HATE "DIAL-UP"

Offline faux fiddy

  • Just becaus I'm the second post on the pissed off thread doesn't mean I'm an
  • Old Timer
  • ******
  • Posts: 4,810
  • bike in a box
Re: To cold to work on the bike
« Reply #14 on: January 14, 2013, 11:18:14 PM »
My mentor's bro works for PVI - Pressure vessels INC.  They do heat exchangers, and scrubbers. He welded us up  what we call the sputnik over three years ago - it is for waste  burning oil. Drip oil  into it and my advice is to have a day tank like on a fishing boat. It might finally be hooked up with a flue this week after three years.

We tested it out in the driveway years ago, finally bringing it inside after years of saying "tis the season to burn waste oil."  We have two 55 gallon barrels almost full, nothing better to do with it of course.  I will report how it works, no pics at this point but it has a cover and a bunch of tubes to extract heat, kinda cool. Looks like a rocket motor.

Oh yeah, it has a 40x60 building around it and we'll prolly leave it off while gone, or who knows leave a bit of oil dripping after we leave, but it will be burning something.

Other than that we use a propane top of the tank radiant heater.
« Last Edit: January 14, 2013, 11:20:57 PM by faux fiddy »
^^^^^^^/l^^^^^^^^^^^^^^/l^^^
. . ______/ l_________________/  l
<'  '  '   '  o .  . . . . . . .................(
 ' VVVVV'   ')))))____>-''''''''''''''''''\  l
' . vvvv_   -              -                 \/

Offline messeduptriple

  • Hot Shot
  • ***
  • Posts: 677
Re: To cold to work on the bike
« Reply #15 on: January 15, 2013, 04:21:46 AM »
D3buttz has it right!
invest in some  very heavy duty outdoor overalls. I never did that few years back, always  had some long johns , jeans and jacket type #$%*. I finally  decided i should try a pair.  I know  carharrt is the best and i dont doubt  at all there warmth but i didnt havr the funds for a pair  of them new.   I was walking in walmart and seen theres for 40$ or something  like  that. I got em and was the best 40$ i have spent  for working  on my bike and just for fukn around  outside... youll be sweating if you have a heavy top jacket for sure. Im in wisconsin and it gets  cold here.  I must  say my knee spots on the overalls are starting  to get a little light  if i may say from all the working  on the floor  and kneeling ..but they still havent let me down. Im thinkn  next year carharrt for sure. 

Sent from my MB855 using Tapatalk 2


Offline toytuff

  • "watching the pinheads"
  • Old Timer
  • ******
  • Posts: 4,349
Re: To cold to work on the bike
« Reply #16 on: January 15, 2013, 05:35:04 AM »
I think I'm just going to invest in a Mini-Split system. Heat in the Winter, AC in the summer.

I think I can do it for under $1800.00. I know, is it worth it?  ::)

tt

Offline toytuff

  • "watching the pinheads"
  • Old Timer
  • ******
  • Posts: 4,349
Re: To cold to work on the bike
« Reply #17 on: January 15, 2013, 05:40:46 AM »
This is cold!

tt


Offline 70CB750

  • Labor omnia vincit improbus.
  • Really Old Timer ...
  • *******
  • Posts: 14,817
  • Northern Virginia
Re: To cold to work on the bike
« Reply #18 on: January 15, 2013, 05:46:54 AM »
I think I'm just going to invest in a Mini-Split system. Heat in the Winter, AC in the summer.

I think I can do it for under $1800.00. I know, is it worth it?  ::)

tt

Go for it.  We finished the upstairs in our barn to make it play room/guest room.  I installed split system myself except charging the lines, that was done by HVAC pro.  Bought the system on ebay for $1500 and it was money well spent - nowadays even Home Depot carries split system  - that was not the case in 2002 when I done it.

 It works great, heats even if temperature outside is under 40F and the AC function is superb too.

Prokop
_______________
Pure Gas - find ethanol free gas station near you

I love it when parts come together.

Dorothy - my CB750
CB750K3F - The Red
Sidecar


CB900C

2006 KLR650

Offline toytuff

  • "watching the pinheads"
  • Old Timer
  • ******
  • Posts: 4,349
Re: To cold to work on the bike
« Reply #19 on: January 15, 2013, 06:02:06 AM »
I wanted to do one last year. I'll buy out of New York. Free ship, no sales tax.

Although my area is 600 sq. feet I have to add the fact of the climate and sunlight. Figures out to be at least a 16000 unit. Probably go 18K.

Another issue is running the 220V line. I could just plug it into the dryer socket then unplug when doing wash. Put the AC on a breaker box of course. Running a new line down the entire house is not an option.

tt

Offline Holubs

  • Enthusiast
  • **
  • Posts: 156
Re: To cold to work on the bike
« Reply #20 on: January 15, 2013, 09:50:03 AM »
My wife bought me a Cadet RCP502 heater for my 18' x 26' detached garage.  This heater was recommended by a construction supervisor who buys these to heat houses they have under construction.  It works great, but you do need 220VAC to power it.

http://www.acmetools.com/tools/CADET+10289+RCP502S+The+Hot+One+Garage+Heater+5000W+240V
Toys:
2 - 1976 CB750F1 - someday projects
2018 Mustang Ecoboost Coupe
1973 Mustang Convertible - Restoration needed

Whatever happened to the old songs, like The Duke of Earl?  Whatever happened to The fu*kin' Duke of Earl? - Randy Newman

Offline Elan

  • Expert
  • ****
  • Posts: 919
    • Vital Motor Parts
Re: To cold to work on the bike
« Reply #21 on: January 15, 2013, 10:52:31 AM »
im also in MA and my garage is a 10'x15' tarp tent thing. I bought a little parabolic heater from harbor freight for $25 bucks. its only 400/800 watts. It doesnt heat up the place but parabolic heat projects into your clothes/hands. Makes working in the cold much better, while not trying to heat up a whole room.

http://www.harborfreight.com/800-watt-400-watt-parabolic-heater-94777.html
Oil Pump Kits are Available on eBay!See my eBay store!
http://stores.ebay.com/Vital-Motor-Parts?_trksid=p2047675.l2563

k6 build   http://forums.sohc4.net/index.php?topic=79833.0

76 750k

Offline scottly

  • Global Moderator
  • Really Old Timer ...
  • *****
  • Posts: 16,501
  • Humboldt, AZ
Re: To cold to work on the bike
« Reply #22 on: January 15, 2013, 06:23:02 PM »
This is cold!

tt
It warmed up a bit in my part of AZ today: 37.6. That's the warmest it's been in the last 5 days! The overnight low was 4.1. :o It was 29 in my shop today....
Don't fix it if it ain't broke!
Helmets save brains. Always wear one and ride like everyone is trying to kill you....

Offline Stev-o

  • Ain't no
  • Really Old Timer ...
  • *******
  • Posts: 34,487
  • Central Texas
Re: To cold to work on the bike
« Reply #23 on: January 15, 2013, 07:12:48 PM »
It's a little cold here too, actually freezing....


'74 "Big Bang" Honda 750K [836].....'76 Honda 550F.....K3 Park Racer!......and a Bomber!............plus plus plus.........