Author Topic: Juha and Mike Rieck top-end (Read 35332 times)

Retro Rocket · « **Reply #175 on:** February 15, 2014, 03:21:01 AM »

Gday Brian, I was talking about Jerry Kooistra, do you know him..? He builds some pretty impressive bikes, just like you of course....

bear · « **Reply #176 on:** February 15, 2014, 11:36:19 AM »

Not well but I've met him.
Seems like a nice fella.
I think Levi Day rides some of his bikes.
Their pit was just down from us at the Island classic.

Cheers,
Brian

Retro Rocket · « **Reply #177 on:** February 15, 2014, 01:15:51 PM »

Quote from: bear on February 15, 2014, 11:36:19 AM

Not well but I've met him.
Seems like a nice fella.
I think Levi Day rides some of his bikes.
Their pit was just down from us at the Island classic.

Cheers,
Brian

Yeah, Levi rides the 500 and 350 Australian championship bikes, they are works of art. Jerry had a heart attack at Phillip Island this year, last time i spoke to him he seemed ok but a heart attack is never a good thing..........

Leino · « **Reply #178 on:** May 09, 2014, 03:09:52 PM »

Latest results Jim?

Jim F · « **Reply #179 on:** May 09, 2014, 04:06:45 PM »

too much time working and not enough time playing with the bikes

The GS750/840 is ready to go back to the dyno
put in a new head gasket with APE heavy studs

The 1100 is on the lift and we are going to re-time the cams
going to try to get them down to 105 in and 107 ex
I also put on a pingle fuel valve so I don't have to use the vacum petcock as Brian and I think that it was
restricting flow at high rpms with the flat slides

I need to program when the retard starts on the turbo bike (There is a question about how much)
and it will be ready for the dyno also

Jim

Sam Green Racing · « **Reply #180 on:** May 10, 2014, 09:18:25 AM »

MRieck · « **Reply #181 on:** May 10, 2014, 09:57:06 AM »

Quote from: Sam Green Racing on May 10, 2014, 09:18:25 AM

Silver hockey pucks in there.

You should see the head going on there.

Sam Green Racing · « **Reply #182 on:** May 10, 2014, 10:10:50 AM »

Ya mean this one, hahaha

MRieck · « **Reply #183 on:** May 10, 2014, 10:28:34 AM »

Yeah....that looks very familiar.

Lots of work in that piece....GSXR valves, cistom exhaust guides as the original bores had been reamed out for replacement guides. Kibblewhite makes conversion guides for the GS BUT they are not offered in oversize. Why I have no idea. Had to cut down something like +.065 GSXR guides. That of course required different bases etc etc etc. Sleepless nights.

The spring bases on the exhaust side are actually from the CB750 5mm conversion kit. So....that engine is part CB.

Bill/BentON Racing · « **Reply #184 on:** May 10, 2014, 01:42:58 PM »

No notes like Sam's old sh*t!

Haha!

Bill Yeh, that's real pretty!

MRieck · « **Reply #185 on:** May 10, 2014, 03:52:10 PM »

Quote from: Bill/BentON Racing on May 10, 2014, 01:42:58 PM

No notes like Sam's old sh*t! Haha! Bill Yeh, that's real pretty!

Sam's old auto $hit just required hours of #$%*1ing degreasing. What a pile of #$%*1ing $hit that thing was.

Who bought that bike for you?

?

Bill/BentON Racing · « **Reply #186 on:** May 10, 2014, 04:01:26 PM »

Hell, I got roped in just like you! I about sh*t when I saw " all you'll have to do is install some cables & tune it etc! "Ha ha ha a ha. Ha ha ha,my stomach's starting to hurt. Sammy you got some friends!!!!!!Bill

kmb69 · « **Reply #187 on:** May 10, 2014, 07:04:38 PM »

What? He didn't get the same instructions I got, "It better be bead blasted before it gits here!"?

$:-\$

It's all good Mikey! NOW

Leino · « **Reply #188 on:** May 11, 2014, 12:36:40 PM »

Old Scrambler · « **Reply #189 on:** May 11, 2014, 12:41:54 PM »

I can hear and see MORE WHEEL LIFT

Bill/BentON Racing · « **Reply #190 on:** May 11, 2014, 12:53:22 PM »

Quote from: MRieck on May 10, 2014, 04:27:47 PM

That was the biggest piece o' $hit ever rolled into my garage. I'd like to ask the men/man who bought that POS.....WTF he was thinking because he doesn't know motorcycles at all. Or he does and decided to F'd Sam. That is one subject I want closure on. That bike was a POS and good money was paid. Who the hell "brokered" that deal?
Speak up man.......!!!!!!!!!!!!!!!!!n You $uck!!!

Yeh, it was worse when I got it! Remember going, Bill....here you done it again! All good now, not the day I picked it up from Rick. As I said before anywhere you had been was fine! But there was still so much to do! Oh well, it's paying off now, but there were days I was ready to throw in the towel...dem carbs!
It's been a hell of journey, and now we finally getting it a little! Learning every time out! Soon, we hope it pays off! First round on Sam! Haha, Bill oh yeh Big Jim ,without your help down here, who knows, thanks.
Jon, and all others thanks so much.................now! Happy Mothers Day! Bill

MRieck · « **Reply #191 on:** May 11, 2014, 01:31:06 PM »

Quote from: Bill/BentON Racing on May 11, 2014, 12:53:22 PM

Quote from: MRieck on May 10, 2014, 04:27:47 PM
That was the biggest piece o' $hit ever rolled into my garage. I'd like to ask the men/man who bought that POS.....WTF he was thinking because he doesn't know motorcycles at all. Or he does and decided to F'd Sam. That is one subject I want closure on. That bike was a POS and good money was paid. Who the hell "brokered" that deal?
Speak up man.......!!!!!!!!!!!!!!!!!n You $uck!!!
Yeh, it was worse when I got it! Remember going, Bill....here you done it again! All good now, not the day I picked it up from Rick. As I said before anywhere you had been was fine! But there was still so much to do! Oh well, it's paying off now, but there were days I was ready to throw in the towel...dem carbs!
It's been a hell of journey, and now we finally getting it a little! Learning every time out! Soon, we hope it pays off! First round on Sam! Haha, Bill oh yeh Big Jim ,without your help down here, who knows, thanks.
Jon, and all others thanks so much.................now! Happy Mothers Day! Bill

Yeah....just a crappy memory now Bill.

Sam Green Racing · « **Reply #192 on:** May 11, 2014, 02:09:38 PM »

well my mum loved me.

Sam.

Leino · « **Reply #193 on:** May 11, 2014, 10:16:00 PM »

Quote from: Old Scrambler on May 11, 2014, 12:41:54 PM

I can hear and see MORE WHEEL LIFT

1498cc, 14:1 compression, JMR-head with some very nice tricks and treats Mike already mentioned... aiming to improve my PB of 9.44

-J-

Bill/BentON Racing · « **Reply #194 on:** May 12, 2014, 12:01:59 AM »

You will!

Sam, your mum didn't have to clean that thing or she might not have called you son so sweetly! Haha!

We still love you!

Sam Green Racing · « **Reply #195 on:** May 12, 2014, 03:56:32 AM »

MRieck · « **Reply #196 on:** May 12, 2014, 04:46:15 AM »

Quote from: Bill/BentON Racing on May 12, 2014, 12:01:59 AM

You will! Sam, your mum didn't have to clean that thing or she might not have called you son so sweetly! Haha! We still love you!

Yeah.....what he said.

Obviously we do love you other wise that auto would have gone to the boneyard.

Jim F · « **Reply #197 on:** May 24, 2014, 07:38:53 AM »

The cams have been retimed ( 105 for the intake and 107 for the exhaust)
Installed a pingel fuel valve to keep the flat slides
From starving on top end
So both the 840 and the 1100 are ready to go back
To the dyno next week

Will keep you posted

Jim

Leino · « **Reply #198 on:** May 24, 2014, 11:50:48 AM »

Quote from: Jim F on May 24, 2014, 07:38:53 AM

The cams have been retimed ( 105 for the intake and 107 for the exhaust)
Installed a pingel fuel valve to keep the flat slides
From starving on top end
So both the 840 and the 1100 are ready to go back
To the dyno next week

Will keep you posted

Jim

I hope you measured valve to piston clearances carefully, I had problems with the same setup when trying to go under 108 on the intake side.

Juha

Bill/BentON Racing · « **Reply #199 on:** May 24, 2014, 07:59:17 PM »

Clarence will get his!

as we all KNOW! Jim, how'd y'all do today? David still #1? Bill

News:

Author Topic: Juha and Mike Rieck top-end (Read 35332 times)