Author Topic: K7 Cafe transformation and Fuel tank question  (Read 3204 times)

0 Members and 2 Guests are viewing this topic.

Offline snowman

  • Enthusiast
  • **
  • Posts: 114
K7 Cafe transformation and Fuel tank question
« on: March 16, 2013, 07:31:22 AM »
Well I am about to embark on my K7 cafe build and have been spending several weeks in the evenings reading many posts getting ideas. I've pretty well settle on the style of seat/cowl I like and what mechanical/electrical changes are needed.

One of the mods I'd like to do is close the fuel tank lid on my K7 tank and install a monza style gas cap. With this in mind, I am looking for some advice as to if it is just a matter of welding the existing lid to the tank and installing the gas cap.

Any advice and/or pointers would greatly be appreciated.

Thanks,
Snowman

Offline bert96

  • past ride
  • Expert
  • ****
  • Posts: 1,384
Re: K7 Cafe transformation and Fuel tank question
« Reply #1 on: March 16, 2013, 08:34:10 AM »
I bought my cap from this site,

http://shopping.rexmar.com/Merchant2/merchant.mvc?Screen=PROD&Product_Code=463151&Category_Code=fuelfillsfliptop

Cheapest place i could find.Did not install it yet....



Bert
QA50 1969,ST-90 1974,mb5 1982,rz350 1983,shadow 1100 1985,vf1000f 1985,BMW K1 1990,shadow tourer 1100 2001,vfr 750 1994,vtr250 199?

Offline Familyvan

  • Full Member
  • *
  • Posts: 84
Re: K7 Cafe transformation and Fuel tank question
« Reply #2 on: March 16, 2013, 09:29:43 AM »
It goes without saying but get the fuel out flush it with loads of water and give it time to vent.


I know it's sucking eggs!!

Thanks stephen

Offline snowman

  • Enthusiast
  • **
  • Posts: 114
Re: K7 Cafe transformation and Fuel tank question
« Reply #3 on: March 16, 2013, 10:11:12 AM »
I bought my cap from this site,

http://shopping.rexmar.com/Merchant2/merchant.mvc?Screen=PROD&Product_Code=463151&Category_Code=fuelfillsfliptop

Cheapest place i could find.Did not install it yet....

Bert

Wow, that's about $20 less than Carpy's site and should cover the shipping costs. Thanks for the link

Offline bert96

  • past ride
  • Expert
  • ****
  • Posts: 1,384
Re: K7 Cafe transformation and Fuel tank question
« Reply #4 on: March 16, 2013, 10:27:59 AM »


You're welcome  ;)


Bert
QA50 1969,ST-90 1974,mb5 1982,rz350 1983,shadow 1100 1985,vf1000f 1985,BMW K1 1990,shadow tourer 1100 2001,vfr 750 1994,vtr250 199?

Offline snowman

  • Enthusiast
  • **
  • Posts: 114
Re: K7 Cafe transformation and Fuel tank question
« Reply #5 on: March 16, 2013, 10:35:19 AM »


You're welcome  ;)


Bert

Hey Bert I see that you're from Quebec, whereabouts are you located?

Offline bert96

  • past ride
  • Expert
  • ****
  • Posts: 1,384
QA50 1969,ST-90 1974,mb5 1982,rz350 1983,shadow 1100 1985,vf1000f 1985,BMW K1 1990,shadow tourer 1100 2001,vfr 750 1994,vtr250 199?

Offline snowman

  • Enthusiast
  • **
  • Posts: 114
Re: K7 Cafe transformation and Fuel tank question
« Reply #7 on: March 16, 2013, 10:53:34 AM »
I'm all for saving a few bucks, but not sacrificing quality. I will stay with the cap from Rexmar, looks like a better product.

Snowman

Online SOHC4 Cafe Racer Fan

  • Speak up, Whipper-Snapper! I'm a
  • Really Old Timer ...
  • *******
  • Posts: 15,731
  • SOHC/4 Member #1235
Re: K7 Cafe transformation and Fuel tank question
« Reply #8 on: March 16, 2013, 11:08:46 AM »
I believe the Rexmar is the same filler. I took mine to a welder to have him close the door. Then I took it to a radiator shop to have it sealed.
1975 CB550K1 "Blue" Stockish Restomod (http://forums.sohc4.net/index.php?topic=135005.0)
1975 CB550F1 frame/CB650 engine hybrid "The Hot Mess" (http://forums.sohc4.net/index.php/topic,150220.0.html)
2008 Triumph Thruxton (http://forums.sohc4.net/index.php/topic,190956.0.html)
2014 MV Agusta Brutale Dragster 800
2015 Yamaha FZ-09 (http://forums.sohc4.net/index.php/topic,186861.0.html)

"There are some things nobody needs in this world, and a bright-red, hunch-back, warp-speed 900cc cafe racer is one of them — but I want one anyway, and on some days I actually believe I need one.... Being shot out of a cannon will always be better than being squeezed out of a tube. That is why God made fast motorcycles, Bubba." Hunter S. Thompson, Song of the Sausage Creature, Cycle World, March 1995.  (http://www.latexnet.org/~csmith/sausage.html and https://magazine.cycleworld.com/article/1995/3/1/song-of-the-sausage-creature)

Sold/Emeritus
1973 CB750K2 "Bionic Mongrel" (http://forums.sohc4.net/index.php?topic=132734.0) - Sold
1977 CB750K7 "Nine Lives" Restomod (http://forums.sohc4.net/index.php?topic=50490.0) - Sold
2005 RVT1000RR RC51-SP2 "El Diablo" - Sold
2016+ Triumph Thruxton 1200 R (http://forums.sohc4.net/index.php/topic,170198.0.html) - Sold

Offline Stev-o

  • Ain't no
  • Really Old Timer ...
  • *******
  • Posts: 34,309
  • Central Texas
Re: K7 Cafe transformation and Fuel tank question
« Reply #9 on: March 16, 2013, 11:47:02 AM »
I believe the Rexmar is the same filler. I took mine to a welder to have him close the door. Then I took it to a radiator shop to have it sealed.

Radiator shop sealed your tank? What product??
'74 "Big Bang" Honda 750K [836].....'76 Honda 550F.....K3 Park Racer!......and a Bomber!............plus plus plus.........

Offline Ricky_Racer

  • Master
  • *****
  • Posts: 1,598
Re: K7 Cafe transformation and Fuel tank question
« Reply #10 on: March 16, 2013, 09:04:57 PM »
The aluminum filler assembly is $29.49 on the Rexmar site...  See http://shopping.rexmar.com/Merchant2/merchant.mvc?Screen=PROD&Product_Code=263103&Category_Code=fuelfillsfliptop  :D  RR
I was put on Earth to accomplish a certain number of things. Now I'm so far behind, I'll never die!

Online SOHC4 Cafe Racer Fan

  • Speak up, Whipper-Snapper! I'm a
  • Really Old Timer ...
  • *******
  • Posts: 15,731
  • SOHC/4 Member #1235
Re: K7 Cafe transformation and Fuel tank question
« Reply #11 on: March 16, 2013, 11:13:02 PM »
I believe the Rexmar is the same filler. I took mine to a welder to have him close the door. Then I took it to a radiator shop to have it sealed.

Radiator shop sealed your tank? What product??
Not certain.
1975 CB550K1 "Blue" Stockish Restomod (http://forums.sohc4.net/index.php?topic=135005.0)
1975 CB550F1 frame/CB650 engine hybrid "The Hot Mess" (http://forums.sohc4.net/index.php/topic,150220.0.html)
2008 Triumph Thruxton (http://forums.sohc4.net/index.php/topic,190956.0.html)
2014 MV Agusta Brutale Dragster 800
2015 Yamaha FZ-09 (http://forums.sohc4.net/index.php/topic,186861.0.html)

"There are some things nobody needs in this world, and a bright-red, hunch-back, warp-speed 900cc cafe racer is one of them — but I want one anyway, and on some days I actually believe I need one.... Being shot out of a cannon will always be better than being squeezed out of a tube. That is why God made fast motorcycles, Bubba." Hunter S. Thompson, Song of the Sausage Creature, Cycle World, March 1995.  (http://www.latexnet.org/~csmith/sausage.html and https://magazine.cycleworld.com/article/1995/3/1/song-of-the-sausage-creature)

Sold/Emeritus
1973 CB750K2 "Bionic Mongrel" (http://forums.sohc4.net/index.php?topic=132734.0) - Sold
1977 CB750K7 "Nine Lives" Restomod (http://forums.sohc4.net/index.php?topic=50490.0) - Sold
2005 RVT1000RR RC51-SP2 "El Diablo" - Sold
2016+ Triumph Thruxton 1200 R (http://forums.sohc4.net/index.php/topic,170198.0.html) - Sold

Offline snowman

  • Enthusiast
  • **
  • Posts: 114
Re: K7 Cafe transformation and Fuel tank question
« Reply #12 on: March 17, 2013, 08:44:12 AM »
Thanks everyone for the tips where to buy the filler cap. Any tips on welding the filler lid and what about the overflow or vent hole under the lid?

Cheers

Offline bert96

  • past ride
  • Expert
  • ****
  • Posts: 1,384
Re: K7 Cafe transformation and Fuel tank question
« Reply #13 on: March 17, 2013, 09:22:21 AM »
For the model a have(same as the link  i give you), there is no problem for the vent.



Bert
QA50 1969,ST-90 1974,mb5 1982,rz350 1983,shadow 1100 1985,vf1000f 1985,BMW K1 1990,shadow tourer 1100 2001,vfr 750 1994,vtr250 199?